Easy
15-30 minutes
This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the right skid plate is sold separately.
It is advised to replace both skid plates at the same time.
To complete this repair you will need a wrench.
• First remove bolts holding old skid plate
• Remove old plate and insert new skid plate
• Level snow blower and adjust skid plates to desired height
• Tighten skid plate bolts
Plate Skid 532174762
OEM part for: Husqvarna, Craftsman, Poulan
Part Number: 532174762
$9.96
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.45 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Plate Skid will fit the following 208 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Husqvarna
Craftsman
Poulan
Show More Compatible ModelsThis item works with the following types of products:
- Snowblower Parts
This part replaces obsolete part #: 174762X431, 174762X479, 5321840-93, 532436122, 532184093
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Plate Skid
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Worn out
Ralph - February 11, 2022
Tool Type
Snowblower
Difficulty
Easy
Time
1-2 hours
Tools Used
Socket set, Wrench Set
Removed the old skid plates and replaced
Removed the old scraper and replaced
Removed the old scraper and replaced
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Both skid plates were with out & I replaced my broken chute cleaner bracket
Robert - February 21, 2021
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Wrench Set, Nutdriver
Took off both worn skid plates & put new ones on & took off old chute cleaner bracket and replaced with new bracket I order - Easy fix - Night before replacing both skid plates and chute cleaner bracket I sprayed penetrating oil on each bolt & nut for easy removal the next day in case I broke the bolts taking off the old skid plates and chute cleaner bracket because I DID NOT ORDER new bolts and nuts - I got very lucky my machine is not new at least 13 to 15 years old and the nuts came off the bolts very easily with no problems - All good 👍👍👍
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Skid plates were worn
Martin - February 10, 2020
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
loosen and remove 4 bolts.
Place skid plates on proper side.
mount and re tighten bolts
Place skid plates on proper side.
mount and re tighten bolts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Skid shoes and scraper plate worn down from normal use on concrete.
Dale - May 31, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set
Replacement is just a simple matter of unbolting the old parts and installing the new parts. Don't let these parts get too worn before replacement or the wear will extend into the actual blower housing and cause damage to it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original skid plates wore through.
Richard - May 2, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Nutdriver
1. Undid 2 bolts for each plate.
2. Removed the old plate.
3. Reversed the process to install the new.
2. Removed the old plate.
3. Reversed the process to install the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Skid plates worn out
William - April 11, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Remove mounting hardware replace skid brackets quick easy fix
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Auger impeller bearing wore out after 11 years, drive pulley sheared key
Jerry - December 20, 2017
Tool Type
Snowblower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Hammer, drift punch
Disassembled, like replacing belts, removed remains of old bearing, cleaned up shaft at pulley area. Replaced defective parts and reassembled. Pretty straight forward after reading the manual. Used a tie down instead of a second person to pull auger section and power section together on re assembly. Could do it slowly and steadily while checking fit and clearance and it held sections together while I put the attachment bolts in the housing. All parts matched the originals with no problems and would use this website again .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wear and tear. Same parts for 8 years before anything needed replacing
Darren - December 7, 2017
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set
Trial by error. Not to hard. Only challenge is by attempting to repair without the manual or user guide. Found the original skid plates were installed backwards from the manufacturer. All the replacement parts look just like the original parts :-)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Many problems: the drive and auger wouldn't engage, not scraping down to the driveway, two broken knobs, extremely worn skids, rusted chute at the bottom making it hard to rotate
Todd - November 12, 2017
Tool Type
Snowblower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Parts Used
- Handle Knob - 532185577
- Bar, Scraper (measures 26-1/2 - 532404932
- Right Hand Skid Plate - 532436125
- Plate Skid - 532174762
- Spring, Brake - 532178828
- Knob, Handle, 3/8, Tri-point, - 532178899
- Traction Drive Spring - 532180926
- Spring, Auger Control - 532178669
- Impeller Belt - 532408010
- Rubber Wheel Plate - 532435789
- V-Belt, Traction - 532416954
- Idler Spring - 532414557
- Chute - 585056901
I replaced lots of parts using multiple tools. The only problems I had was due to rusted fasteners. I had a great experience with eReplacementParts my order arrived very fast including one part (the chute assembly) all pieces fit perfect. I did a major overhaul now the blower is running great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Normal wear from use
EUGENE - October 21, 2017
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Wrench Set
Removed old parts and replaced with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
