eReplacementParts.com
877-346-4814
Husqvarna Parts
Repair Parts Home  Lawn Equipment Parts  Husqvarna Parts  532416954 V-Belt, Traction

V-Belt,​ Traction

Part Number: 532416954
HusqvarnaPoulan
Availability: 25+ in stock
Price: $26.67
Ships within 1 business day

*This part replaces obsolete part #: 179092, 416954 and 532179092.

Product Information
Manufacturer: Husqvarna, Poulan
Product Number: 532416954
Classification: Part
Weight: 0.20 lbs.
Shipping: Ships Worldwide
Description:
This is an authentic OEM part for snowblowers and snow throwers made by Husqvarna and Poulan. The traction v-belt goes around the traction drive pulley and connects to the engine. It may become broken or stretched and will need to be replaced. A socket set, a set of pliers, and a screwdriver may be needed during the replacement of the belt. This part is available as an individual replacement.
Compatibility

This part is compatible with the following machines:

Husqvarna
Poulan
Expand the 73 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Snowblower
Questions & Answers

what are dimensions on this belt
jerald tichy for model number pp8527es asked on 2019-02-20
Hi Jerald, Thank you for your question. The length of the belt is approximately 34-1/2 inches. I hope this helps. Thank you and have a great day!
Repair Instructions: Submitted by Customers Like You
Tool Type:
Snowblower
Parts Used:
Impeller Belt - 532408010
V-Belt, Traction - 532416954
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Bad belt
Changed the belts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
V-Belt, Traction - 532416954
Idler Spring - 532414557
Belt - 532408007
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Wrench Set
Tighter spring was broke and the belts needed to be replaced
Disconnected the snow blower from the engine and proceeded to replace the broken spring, and replaced the belts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Ring, Rubber Wheel - 585021001
Impeller Belt - 532408010
Roller - 532192275
Ring, Crescent - 532192147
V-Belt, Traction - 532416954
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Pliers, Socket set, Wrench Set, Nutdriver, Welder.
Traction drive not working, previous traction belt incorrect and slipping
Removed blower, traction drive belt, installed impeller tensioner roller with new ring. Installed new traction drive and impeller belts. Removed lower cover inspected rubber wheel ring, good. Further inspection found broken drive dogs on both wheels, discontinued part, will weld repair both wheels.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Impeller Belt - 532408010
V-Belt, Traction - 532416954
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Socket set, Adjustable Wrench, Electric impact gun
The pulley was very rusty and eating away the drive belt
Split the unit two 9/16 bolts one 9/16 bolt to hold the chute two 10 mm screws that hold the cover ..lowered the front of the snowblower to access the belts and pulley .Replaced the belts and drive pulley lubed all pivots and check spring tensions . Reversed the disassembly .started it up tested everything was working .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Auger impeller bearing wore out after 11 years, drive pulley sheared key
Disassembled, like replacing belts, removed remains of old bearing, cleaned up shaft at pulley area. Replaced defective parts and reassembled. Pretty straight forward after reading the manual. Used a tie down instead of a second person to pull auger section and power section together on re assembly. Could do it slowly and steadily while checking fit and clearance and it held sections together while I put the attachment bolts in the housing. All parts matched the originals with no problems and would use this website again .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Many problems: the drive and auger wouldn't engage, not scraping down to the driveway, two broken knobs, extremely worn skids, rusted chute at the bottom making it hard to rotate
I replaced lots of parts using multiple tools. The only problems I had was due to rusted fasteners. I had a great experience with eReplacementParts my order arrived very fast including one part (the chute assembly) all pieces fit perfect. I did a major overhaul now the blower is running great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Impeller Belt - 532408010
V-Belt, Traction - 532416954
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Worn out belts.
Replaced the old belts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Pulley.W/Spacer.2.25 - 532180522
Impeller Belt - 532408010
V-Belt, Traction - 532416954
Idler Spring - 532414557
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
Idler pulley worn, idler spring broken, belts worn. Replaced all snowblower works fine now.
Remove the two bolts that hold the front and back sections together, one on either side of the machine. Remove broken parts, reinstall. It's helpful if you have a second set of hands to get the two parts back together and keep the new belts in place but it can be done by yourself.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Does NOT fit husqvarna 8527 SBE.
    Warning - this belt does not fit a 2006-07 era Husqvarna 8527 SBE. It is not as wide or long as is required. ...First time they sent complete wrong order, then after re-ordering, the belt sent does not fit. It is not as wide or long as one replacing. I used this site because the older husqvarna 8527 SBE belts are not stocked at local stores just late model parts.... Figured this site would be the place to get it, but all they did was send the generic husqvarna belt for newer model blowers. Complete waste of time and money.
    Guest - December 28, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Husqvarna, Poulan
    Product Number: 532416954
    Classification: Part
    Weight: 0.20 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal