866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Switch

Part Number: 530069572
PoulanParamountWeed EaterHusqvarnaJonsered
Availability: 8 in stock
Price: $5.69
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: , 530029239, 530037692 and 530069292.

Description:
This is a genuine manufacturer-sourced replacement part which is specially designed for handheld lawn and garden equipment. The switch allows a user to turn the unit on and off, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality plastic body switch is sold individually.
Product Information
Manufacturer: Poulan, Paramount, Weed Eater, Husqvarna, Jonsered
Product Number: 530069572
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Paramount
Poulan
Weed Eater

Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Chain Saw
  • • Pruner
  • • Saw
  • • Trimmer
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Spark Plug - 952030150
Switch - 530069572
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Hard starting and on/off switch defective
Both repairs were done without any disassembly. On/off rocker switch can easily be reverse repaired. Note wiring before removing old switch assembly. Remove the old spark pluge , then installed the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Clutch Assembly - 530014949
Switch - 530069572
Clutch Removal Tool - 530031116
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Clutch remover tool
Clutch and switch both went bad
Removed old switch. replaced with new one. Bought clutch tool along with new clutch. Removed side cover, bar, and chain. removed spark plug and inserted small piece of rope so that it would not try to start. Took clutch tool and removed clutch. Installed new clutch and put back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Switch - 530069572
Purge Bulb - 530058709
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
The on/off switch was faulty and didn't function properly.
The switch replacement was relatively simple and straight forward. I separated the handle exposing the switch. Using a pair of needle nose pliers I removed the two (2) wires connected to the switch. Gently prying the old switch from the case was easy and only required the use of a thin flat blade. The new switch was placed into the opening and popped into place. Reattching the two (2) wired is sort of tedious within the tight space. Again, the needle now=se pliers worked well.
Reattaching the handle pieces requires some trial and error moves. Getting the throttle lever back in place is very critical at this point..The throttle lever is only held in place by pressure from the handle halves. Before attaching the screws be sure to actuate the throttle lever to assure it moves freely both in and returns on its on to the neutral position.
Attaching the screws is a simple step with you T25 Torx bit.
Check for proper operation by following your prescribed starting procedures.
Happy trimming
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Switch - 530069572
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Kill or stop switch broken
Unscrewed four screws that hold the housing together, pushed switch out of housing, disconnect two wires from switch. Connect wires on new switch, push new switch into housing, screw housing back together. Good to go. No special instructions, remember housing is plastic don't cross thread the screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Switch - ( 530069572 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • On off switch
    Need this part to complete repair on chainsaw
    Guest - May 13, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy