*This part replaces obsolete part #: 530094188, 5300941-88, 530014292 (Clutch Spring) and 530014292.
Product Information
Description:
This is an authentic replacement part sourced from original manufacturer. It is commonly used on gas chainsaws. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today’s centrifugal clutches will function even when they shouldn’t, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the centrifugal clutch requires attention. This clutch is made out of metal and it is sold individually. Please note the clutch drum, spacer and washer are all sold separately. To replace this item you would need a screwdriver and pliers. |
Frequently Purchased With
Compatibility
the 150+ compatible machines
This part is compatible with the following machines:
Poulan
1900 Gas Chain Saw
1900 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
2025 Gas Chain Saw
2025 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
1900 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
2025 Gas Chain Saw
2025 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 LE Gas Chain Saw
2075 LE Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw
2150LE Type 1 Gas Chain Saw
2150LE Type 1 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 LE Gas Chain Saw
2075 LE Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw
2150LE Type 1 Gas Chain Saw
2150LE Type 1 Gas Chain Saw
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
Questions & Answers for Clutch Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
6 of 7 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Clutch removal tool
Clutch and clutch drum worn
1. Removed the cover from the clutch and rope starter.
2. Removed the clutch and washer.
3. Installed the new parts.
4. Installed the covers for the clutch and rope starter.
2. Removed the clutch and washer.
3. Installed the new parts.
4. Installed the covers for the clutch and rope starter.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Plug socket, rewind rope, clutch tool .
Clutch was slipping on chainsaw
Removed the spark plug.
Pushed rewind rope down into the cylinder.
Put the clutch tool on the clutch, turning backwards till the piston comes up against the rope in the cylinder.
Remove the clutch, the clutch drum, the thrust washer.
Put the new parts on In the reverse order.
Pull the rope out of the cylinder, replace the spark plug.
Replace the bar and chainsaw, and covers.
Pushed rewind rope down into the cylinder.
Put the clutch tool on the clutch, turning backwards till the piston comes up against the rope in the cylinder.
Remove the clutch, the clutch drum, the thrust washer.
Put the new parts on In the reverse order.
Pull the rope out of the cylinder, replace the spark plug.
Replace the bar and chainsaw, and covers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, Adjustable Wrench, star screwdriver, sockets, thin rope, open end wrench.
Old clutch failed.
I used a socket to loosen the bolts to take off the bar and chain. Then a star screwdriver to take off the cover to get to the spark plug . A socket to take out the plug. Then a small rope was inserted through the plug hole down in the cylinder so it would lock up when removing the old clutch. I used an open end wrench and a pair of vice grips to loosen the old clutch which has to be loosened by turning to the right. I put the new clutch in and tightened it by turning to the left. Took the rope out of the cylinder put the plug back in. Put the cover back on. Put the bar and chain back on. It ran perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, Allen wrench
Chain saw clutch slipping and starter rope jerky.
1. Removed the old clutch and the sprocket.
2. Installed the new sprocket and the clutch with the new bearing.
3. Installed the new starter pulley and 3 ft of the new starter rope in accordance with a youtube video.
4. Started the chainsaw and everything worked perfectly.
2. Installed the new sprocket and the clutch with the new bearing.
3. Installed the new starter pulley and 3 ft of the new starter rope in accordance with a youtube video.
4. Started the chainsaw and everything worked perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set
chain would not turn
1 Watched several videos on U-tube
2 Took out spark plug Plugged piston with robe
3 Used Clutch Removal Tool -Easy
4 Replaced kit oil pump did not use spring afraid I would not get it set right Do not know if this was causing oil leak - old one looked good
5, Installed clutch drum and gear assembly and clutch
6 Not bad for a beginner and a woman - it worked !!
2 Took out spark plug Plugged piston with robe
3 Used Clutch Removal Tool -Easy
4 Replaced kit oil pump did not use spring afraid I would not get it set right Do not know if this was causing oil leak - old one looked good
5, Installed clutch drum and gear assembly and clutch
6 Not bad for a beginner and a woman - it worked !!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Clutch remover tool
Clutch and switch both went bad
Removed old switch. replaced with new one. Bought clutch tool along with new clutch. Removed side cover, bar, and chain. removed spark plug and inserted small piece of rope so that it would not try to start. Took clutch tool and removed clutch. Installed new clutch and put back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Worn components.
1. Removed the cover plate.
2. Pulled the spark plug out.
3. Put the rope in the cylinder so I could remove the clutch.
4. Replaced the clutch.
5. Tightened it.
6. Installed the plate.
7. Reassembled the saw and started cutting.
2. Pulled the spark plug out.
3. Put the rope in the cylinder so I could remove the clutch.
4. Replaced the clutch.
5. Tightened it.
6. Installed the plate.
7. Reassembled the saw and started cutting.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Clutch was slipping when cutting a log
There is a couple of good videos on youtube that show you how to replace these
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Worn out clutch and drum
https://www.youtube.com/watch?v=akRk7F6ento
I watched the above video on how to remove and install the clutch on my chainsaw. Works like a new one now.
I watched the above video on how to remove and install the clutch on my chainsaw. Works like a new one now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Rope for hold piston
Clutch worn
Took spark plug out inserted a piece of rope to hold piston from turning (gives it a soft stop). Backed clutch off installed new clutch.15-30 min repair
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
9 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
9
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy to replace.
New in package. Good fit.
Guest -
June 11, 2023
Verified Purchase
Chainsaw clutch repair
Part fit perfectly arrived quickly saw back up and running!
Guest -
June 7, 2022
Verified Purchase
Easy repair, great parts availability
New part arrived sooner than expected. Easily installed. Chain saw working great! Ereplacement web site easy to navigate and parts availability is outstanding! Keep up the good work. Pete
Pete -
November 5, 2021
Verified Purchase
exactly what I needed
the part was perfect and came in a timely manner - no issues whatsoever with this company - would gladly use them again
Guest -
October 30, 2020
Verified Purchase
Very Easy process
I got the part number from my owners manual, put the numbers in the search and they popped right up. Good price, easy shipping and I had them in a few days. My chainsaw is up and running and works great. Thanks for having the parts I needed.
Galen -
October 15, 2020
Verified Purchase
easy repair
it's match with the origin part., works great.
Guest -
September 4, 2020
Verified Purchase
Easy repair
Excellent
Guest -
August 6, 2020
Verified Purchase
Craftsman saw parts
This picture for my item stated it was a saw clutch, all I saw in the posting was a clutch spring. So, I had to trust the written word was correct. So this was confusing when I made the order.
I did receive exactly what I wanted.
Guest -
July 25, 2020
Verified Purchase
Perfect!!
Parts ordered were received in new condition and packed very well. Fast shipping. Great Tech. support. I had a question about my model saw and was answered within minutes. Brought a 20 year old Poulan back to life. I will be using this company from now on. ⭐️⭐️⭐️⭐️⭐️
Jacky -
June 15, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information