Easy
30-60 minutes
This is an authentic item that is specially designed for use with Walbro carburetors commonly installed on lawn and garden equipment. Gaskets are generally utilized to provide a tight seal between connected parts, over time the material may wear out and even begin to crack eventually requiring a replacement. This high-quality kit is sold individually, keep in mind it includes all the necessary components to repair your carburetor. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of these components.
NOTE: Here is the link to our article on How to Rebuild a Two-Cycle Engine Carburetor How to Rebuild a Two-Cycle Engine Carburetor " />
Repair Kit K10-WAT
OEM part for: Walbro
Part Number: K10-WAT
$33.40
Factory Backorder
Date Available: Unknown 
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Compatibility
This Repair Kit will fit the following 484 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 484 matching models.
Walbro
Show More Compatible Models484 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Walbro
This item works with the following types of products:
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Repair Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The Mantis tiller wouldn't start
Gregory - April 10, 2016
👍 5 of 5 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
I bought the K-10 carb rebuild kit and replaced the diaphragms in the carburetor. Mixed a fresh batch of 2 cycle gas and after a few pulls it started. The old air filter crumbled when I pulled it out so I replaced that too. The old one was the original from back in the late 80's. I also replaced the gasket in the fuel tank cap. The old seal was melted by the gas stored in the tank for a few years without being used. Over all a very easy repair that cost around $20. The last carb repair on this tiller was at least 8-10 years ago. At that time I replaced the diaphragms too.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Weed trimmer would not run except for short bursts when I sprayed starter fluid in the carb
Edward - June 5, 2016
👍 3 of 4 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Compressed air and spray carb cleaner .
Parts Used
I removed the carburetor and disassembled it that's when I saw the flaps that open and close controlling the fuel flow were stiff from age and were not seating properly. That part needed replacement . I removed the needle that meters the fuel. Then on the other side I replaced the fuel diaphragm. While all these parts were removed I blew out all the passages after spraying with carb cleaner . Reassembled everything and replaced the spark plug and air cleaner . The trimmer started right up . I the adjusted the High speed and then the low speed needle valve .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hard to start, did not run smooth
James - May 8, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
1. Removed the air filter box
2. Removed the 2 nuts holding the carburetor in place
3. Removed the carburetor,
4. Disassembled the carb
5. Replaced all gaskets and the needle valve assembly
6. Installed the carb and throttle cable
7. Installed the new filter box and filter
2. Removed the 2 nuts holding the carburetor in place
3. Removed the carburetor,
4. Disassembled the carb
5. Replaced all gaskets and the needle valve assembly
6. Installed the carb and throttle cable
7. Installed the new filter box and filter
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber diaphram in carurater had harded and stiffened
Dennis - December 6, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the side cover from the weedeater blower and 2 screws to pull carb. Cleaned carb in sonic cleaner and installed rebuild kit. Works great now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
