eReplacementParts.com
877-346-4814
Porter Cable Parts
photo thumbnailphoto thumbnail360 degree photo thumbnail
Insert

Insert

Part Number: 911801
Porter CableBlack and Decker
Availability: 3 in stock
Price: $2.81
Order within the next 10 hours
and your part ships today!
Product Information
Manufacturer: Porter Cable, Black and Decker
Product Number: 911801
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
The insert goes next to the retaining ring. This part is available as an individual replacement part. This is an original Porter Cable and Black & Decker part for use in routers. A set of pliers might be needed during the installation process. This part is made out of metal and will need to be replaced if it breaks.
Products Compatibility

This item works with the following types of products:

  • • Router
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Router
Parts Used:
Insert - 911801
Axle - 911799
Clamp - A22702
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
The aluminum clamp is too soft should someone try to unlock and already unlocked clamp. The same is true for locking an already locked clamp. It should be made of steel
I just replaced the axle, insert and clamp. But it could happen again as the clamp is out of sight under the router table.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Insert - 911801
Axle - 911799
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Star screwdriver
The above the table tool no longer opened the clamp on table mounted router
1. Using star screwdriver removed large machine screw via hole in open clamp.
2. Removed insert and clamp fell off axle. Examined both pieces for wear that would explain the problem. Both looked pretty good.
3. Put axle in place. Slipped clamp over it and inserted machine screw part way.
4. Placed insert through hex shape hole in clamp and into axle and tightened machine screw
5. Closed and opened clamp several times and adjusted tightness of machine screw. Can only access screw with clamp open so some trial and error.
6. Tested above table tool - didn't work. Realized problem was wear of hex shaped hole in clamp.
7. Ordered new clamp from eReplacementparts
8. Installed new clamp as above. Works perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Insert - 911801
Retaining Ring - 911804
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
An e-clip failed and allowed the retained part to be lost... A small but critical part of the clamp on the router base.
No instructions other than the parts list and parts diagram provided on eRlacementparts web site. Thanks for a quick solution and a user friendly site for guys like me.
This was a "five minute job" that only took five minutes. I can't express how valuable that is...
Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Porter Cable, Black and Decker
Product Number: 911801
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy