eReplacementParts.com
877-346-4814
Porter Cable Parts

Clamp

Part Number: A22702
Porter CableBlack and Decker
Availability: 4 in stock
Price: $13.09
Ships within 1 business day

*This part replaces obsolete part #: and 911327.

Product Information
Manufacturer: Porter Cable, Black and Decker
Product Number: A22702
Classification: Part
Weight: 0.10 lbs.
Shipping: Ships Worldwide
Description:
It is made out of metal and is sold individually. The clamp attaches to the axle. You may need a screwdriver when replacing this part. It will require replacing if it becomes broken. This is an OEM Porter Cable and Black & Decker part directly sourced from the manufacturer for use in routers.
Products Compatibility

This item works with the following types of products:

  • • Router
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Router
Parts Used:
Clamp - A22702
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, madical hemostats
Clamp hex rounded out
Removed old parts, installed new. the snap ring was a challenge. I used hemostat to hold snap ring to complete assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Retaining Ring - 911804
Clamp - A22702
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Square bit driver
Clamp was worn out disallowing adjustability
Removed retaining clip, remove and replace clamp, replace (very small clip), make final adjustments. Be very careful reinstalling the small clip. The retaining clip fits tightly into slot. Be careful that it doesn't spring free from the needle nose pliers and losing the clip.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Insert - 911801
Axle - 911799
Clamp - A22702
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
The aluminum clamp is too soft should someone try to unlock and already unlocked clamp. The same is true for locking an already locked clamp. It should be made of steel
I just replaced the axle, insert and clamp. But it could happen again as the clamp is out of sight under the router table.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Clamp - A22702
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Clamp on PC Router Broke
Unscrew the fitting holding the old one in place, remove old one, new one goes on in reverse order from the removal. Be sure you don't lose the small part of the pivot pin.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Porter Cable, Black and Decker
Product Number: A22702
Classification: Part
Weight: 0.10 lbs.
Shipping: Ships Worldwide
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy