Watch The
Repair Video

Hex Flange Bearing

Part Number: 941-0245

5 Reviews

Order within the next 8 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 748-0245 and 741-0245.

Product Information

Description:

Flange bearings are utilized to provide a tight fit between connected parts while allowing for movement with minimum friction. It is an authentic manufacturer-sourced component which is specially designed for use with lawn and garden equipment. If the original item is damaged or is missing, this will provide an identical replacement. This hex flange bearing is made of high-quality material and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure. A wrench set might be needed to perform this repair.

Warning: California's Proposition 65

Frequently Purchased With

Flange Bushing..
$4.06

Flat Washer
$3.94

Housing-Bearin..
$12.03

Compatibility

This part is compatible with the following machines:

Ryobi

31AE660F013 Snow Thrower
31AE660G034 Snow Thrower

31AE6Q0F034 Snow Thrower

MTD

316E610E382 (1996) Snowblower
316E640F382 (1996) Snowblower
317E610E382 (1997) Snowblower
31AE600E382 (1998) Snowblower
31AE640F382 (1998) Snowblower
31AE600E382 (1999) Snowblower
31AE6C0F382 (1999) Snowblower
31AE600E300 (2003) Snowblower
31AE660G300 (2003) Snowblower
31AE6COF300 (2003) Snowblower
31AE600E300 (2004) Snowblower
31AE660G300 (2004) Snowblower
31AE6C0F300 (2004) Snowblower
31AH660G300 (2004) Snowblower
31AE6AHE722 (2005) Snowblower
31AE6BHE722 (2005) Snowblower
31AE6GLF722 (2005) Snowblower
31AE6LLG722 (2005) Snowblower
31AH6LKH722 (2005) Snowblower
31AH5ZLH704 (2008) Snowblower
31AH6ZLG704 (2008) Snowblower
31AM62KE704 (2008) Snowblower
31AM63LF704 (2008) Snowblower
317E640F033 (1997) Snowblower
316-610E147 (1996) Snow Blower
316-611D118 (26274) (1996) Snow Blower
316-641E118 (1996) Snow Blower
316E610E088 (TMO-3525302) (1996) Snow Blower
316E641E205 (1996) Snow Blower
316E660G352 (1619743) (1996) Snow Blower
316E611D352 (1652656) (1996) Snow Blower
316E640F013 (1996) Snow Blower
316E661E118 (537980) (1996) Snow Blower
316E740F352 (1652670) (1996) Snow Blower
316E740F752 (1652670) (1996) Snow Blower
316E760F118 (590678) (1996) Snow Blower
311355 (1991) Snowblower
311385 (1991) Snowblower
311345 (1991) Snowblower
310345 (1990) Snowblower Parts
310355 (1990) Snowblower Parts
310385 (1990) Snowblower Parts

Yard Machines

31AE6GLF723 (2005) Snowblower
31AE6LFH718 (2005) Snowblower
31AE6LLG723 (2005) Snowblower
31AE600E161 (1999) Snowblower
31AE600E161 (1998) Snowblower

31AE640F000 (1998) Snowblower
317E610E000 (1997) Snowblower
316E610E000 (1996) Snowblower
316E640F000 (1996) Snowblower

Bolens

31AS611D163 (2004) Snowblower

Yard Man

Expand the 150+ compatible machines

Questions & Answers

Sort by

What are the dimensions of this item 941-0245

Richard for model number 31AE762F012 asked on 2023-02-09

Hello Richard, Thank you for the question. This Flange Bearing has a.75" Inside Dia. Thank you for the inquiry!

Did this question help you?

Part 26 axle bushing two required, are they one or two to a pack?

Martin for model number 31AH6WQ4711 asked on 2022-11-21

Hello Martin, Thank you for the question. The Hex Flange Bearing is sold individually. We hope this helps, good luck with this repair!

Did this question help you?

Repair Instructions: Submitted by Customers Like You

Tool Type:

Snowblower

Parts Used:

Friction Wheel Ass "Y" - 05080AP

Hex Flange Bearing - 941-0245

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set

would not move forward of back because of no contact in the friction drive due to bearing play and the friction pulley

Replaced the parts referenced

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Hex Flange Bearing - 941-0245

Flange Bushing - 741-0493C

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench, Hydraulic Jack

Snow Blower, One Wheel Dropped Down, In A Beaver Hole ? ?

Hydraulic Jack, -To Square The Inside. A Bar To Bend The Shaft On The Wheel Straight. All Parts The 13 Year, Needed ~ Fast Service ! The Drivebelt & Belts, A Pulley, Measure The Shim's Needed, For The Axle, Ordered 2 Incase, Bearings. Ready 30 Min. ! The New Carburetor ,1 Hour The Gas Tank Was Only 1" Down ! Before, 1 Hour It Was (Empty) ! 620 Ft. S-Curve, Down Hill .

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

V-Belt, 2L x 33 - 754-04088

Hex Flange Bearing - 941-0245

V-Belt - 954-04050A

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Nutdriver, Adjustable Wrench

I installed two new axle bushings, installed a new drive belt and snow thrower belt.

I removed both wheels from the axles, removed/slid off the worn axle bushings, slid on the new axle bushings, and installed the wheels.
I installed new drive and thrower belts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Snowblower

Parts Used:

Belt Cover - 731-1324

Flat Idler - 756-0178

Flange Bushing - 741-0493C

Hex Flange Bearing - 941-0245

Adapter-Pulley - 948-0360

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Socket set, Wrench Set

The belt cover was warn out, the flat idler bearing was noisy. The flange bushing and hex flange bearing was worn out. The adapter-pully was broken.

I disassembled the warn and broken parts and replaced them with the new parts. Everything went back together very nicely. I definitely needed to pay attention to how things came apart, so I got each part back together in the right place and the right direction.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

5 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Easy repair and great part

Brand new condition but shipping was a litter slow

jorge - November 9, 2022 Verified Purchase

WORKED FINE

SNOW BLOWER PART---ARRIVED OK ---WITH THE PROB WE HAVE TODAY GREAT JOB

clate - June 3, 2020 Verified Purchase

Back together

Was right part. All back together. Took longer than i thought to get.

Guest - December 3, 2021 Verified Purchase

Right parts

Thanks for getting my parts to me. Next time I may ship them a little faster. Overall , very good , easy to find what I needed. Thank you

Guest - December 10, 2019 Verified Purchase

Great parts, delayed delivery

Parts arrived two weeks later than advertised. Parts were available when I ordered but then delayed.

Guest - February 12, 2023 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information