eReplacementParts.com
877-346-4814
Briggs and Stratton Parts

Head-cylinder 796026

OEM part for: Briggs and Stratton, Toro

Part Number: 796026


Install
Videos!
Grid squares measure 1x1 inch
$273.72
Factory Backorder
Date Available: Unknown
Easy 1-2 hours (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Briggs and StrattonToro
Does this fit my product?

Product Description ?

This is an original part manufactured for use with small engines. This is the cylinder head kit, and includes many of the parts above the cylinder. The head is complete, and includes the valves, valve springs, valve seals, and keepers. This kit includes the gaskets for the cylinder head, rocker cover, exhaust, and carburetor, the kit also includes the rocker arms. This kit is sold individually.

  • Classification: Part
  • Weight: 6.02 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This item works with the following types of products:

  • Lawn Tractor Parts

This part replaces obsolete part #: 796005, 794538, 698147, 691165, 690188, 495858, 794123, 698404, 793990, 792360, 794062, 698148, 796025, 796186, 794223, 793991, 793989

Customer Part Reviews ?

5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Many thanks
    Yes, perfect fit. Installed, cut that afternoon. I don’t have much free time, so getting the right part was greatly appreciated.
    Guest - October 14, 2022 Verified Purchase
    New cylinder head.
    Even though I waited 6 months for the part. I know ir wasn't your fault. I was very excited to get it last sat. It was pretty easy to install and I used my lawn mower minutes after I installed it and it ran perfect. The only issue I had was that a few holes weren't tapped. The muffler bracket bolt hole and the 2 engine cover bolt holes. I was a minor set back which I was able to fix. Again I don't think that was e replacement parts fault. I will definitely order from them again when I need parts.
    Anonymous - October 12, 2022 Verified Purchase
    Brigs head
    The web site is amazing. The ease of locating parts is wonderful. I did need to contact a representative in this case because the individual part was not available, needed to purchase the assembly. The representative was vary helpful in confirming the correct parts. The parts fit perfectly because all are OEM. Shipping time could have been better. Grass will grow in a week.
    Guest - July 22, 2020 Verified Purchase
    this is a great item for the price
    for the price, this is the way to go everything you need is here to get your mower running again
    Guest - March 3, 2020 Verified Purchase
    Great part everything one needs
    Perfect replacement part had everything up and running in 40 min. I give it 110% A Ok
    Guest - September 29, 2019 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Head-cylinder


    Is there a site that has all the interchangeable part numbers for the head on this motor
    Leon for model number 31P677-0144-B3 asked on 2022-04-25
    Hello Leon, thank you for your question. Our site has the information you are searching for. Just key in your model, click on view diagrams, choose the one that says Cylinder Head Gasket Set-Valve Intake Manifold Lubrication Valves. The parts are below the schematic. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
    eReplacementParts Team April 25, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 1-2 hours (3 rated repairs)?

    The exhaust valve seat disintegrated causing damage to the head and the exhaust valve. The broken fragments caused some damage to the piston head as well, but I was able to smooth it out.

    Joe - May 18, 2016
    👍 17 of 18 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Socket set, Wrench Set

    I took everything apart and accessed the damage and felt comfortable enough to attempt the repairs myself. I do not have a shop manual on the that engine but I was able to figure things out as I got into the repairs. I thought that I would have to rebuild the head completely with individual parts, but was surprised to be able to purchase the head assembly online. The actual repair was simple, after receiving the parts, I just switched out the damaged pieces with the head assembly, using the gaskets provided and making sure to reinstall the push rods with the correct valve. The actual work took less than an hour. Afterwards I started the mower and mowed about a half acre. The engine did not run smoothly, it idled a little rough but had plenty of power. I finished mowing the next day and the engine is now back to normal. It runs great and starts a lot easier now. I really appreciate "eReplacementParts.com, Thanks
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Spark plug threads stripped out and helicoil didn't work well enough.

    Brian - March 23, 2024
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Socket set, Wrench Set, Torque set

    Removed the cowling from engine then exhaust pipe and the gas and air feed from the carb. Removed the bolts from the cylinder head. Of course I did the star removal(bouncing from side to side as not to warp the head). Since I had it open I cleaned the piston head and removed the valves. Put on some gasket sealer new gasket, put in the new Valves and set correctly . Then put the cylinder head on putting the bolts it the same way they were taken out and torqued to specs. Put it all back together and it's been running great ever since. A now with no issues.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Cyl. Head cracked

    james - July 19, 2018
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Feeler gauge

    Cleaned engine.removed shroud,and loosened carb and muffler.next removed head and cleaned gasket surfaces.assembled in reverse order. Adjust rocker clearances. Pre lube valve train. install cover.change oil& filter.engine runs like new. Mow grass!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal