Easy
Less than 15 minutes
Genuine Bosch replacement part, this part is sold as a kit.
The 2610021345 is the handle for the Bosch Miter Saws listed below.
This is the handle that you push and pull on to cut the material you are using.
It includes both the top and bottom handles.
Handle Set 2610021345
OEM part for: Bosch
Part Number: 2610021345
$16.25
In Stock
Order within the next 7 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.52 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Bosch
5312 12" Dual-Bevel Slide Miter Saw View Diagrams & Manuals
4310 10" Dual-Bevel Slide Miter Saw View Diagrams & Manuals
This item works with the following types of products:
- Miter Saw Parts
- Saw Parts
This part replaces obsolete part #: 2610009611, 2610009610
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Happy
Part arrived quickly in good condition, fit perfectly and was priced fairly. Shipping was a little high.
Guest -
July 14, 2023
Verified Purchase
Always a great experience!
The part was just as I ordered. The fit was perfect!
iGlobal -
April 21, 2023
Verified Purchase
Great Product
Good Price, Fast service Great Product
Guest -
November 13, 2020
Verified Purchase
Third handle, part works
Flimsy plastic construction on the handle, so I’ve replaced it a couple times. ERP is great but the shipping cost more than the part?
Al -
July 24, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Handle Set
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken handle
Glenn - October 17, 2016
👍 6 of 7 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed 4 top screws and 5 bottom screws
Separated the top from the bottom handle
Removed 2 screws holding the trigger mechanism
Reinstalled in reverse order
Separated the top from the bottom handle
Removed 2 screws holding the trigger mechanism
Reinstalled in reverse order
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The handle had a crack in the plastic molded handle.
Russell - July 5, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the top part of the handle 3 screws 2 long and 1 short screw near the front.under the handle2 screws. 1 short machine screw inside where the lower handle is attached to the metal frame.
2. Took a picture of the inside configuration of the wires and harness . Also the plastic red switch assembly.
removed the switch with 2 screws and other switch parts.
3. Replace lower plastic handle and all the switches. making sure the wire harness was tucked in the same way it came out. replaced the red thumb switch assembly.
4. Replaced all screws in the order that I removed and done.... about 25 minutes.
2. Took a picture of the inside configuration of the wires and harness . Also the plastic red switch assembly.
removed the switch with 2 screws and other switch parts.
3. Replace lower plastic handle and all the switches. making sure the wire harness was tucked in the same way it came out. replaced the red thumb switch assembly.
4. Replaced all screws in the order that I removed and done.... about 25 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
A 2x4 gotten loose and feel on the saw
Michael - April 30, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the screws from the handle assembly. I took some pictures of where all the internal parts went. I then installed all of the parts into the new handle and screwed the halves back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle broke and general maintenance. maintenance the handle and replaced it with the new one.
Leon - April 9, 2022
👍 1 of 1 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
maintenance
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I cracked the handle rolling it through a tight door. Decided to replace it before it got too bad. Also replaced a few parts that were just cosmetic.
Brian - August 4, 2021
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
It was just a matter of removing the screws and paying attention to how the wires and trigger stop were routed and positioned. If you don't have a strong memory take a few photos and pay attention to how you remove the trigger release. Very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle broke in transport
Patti - April 24, 2019
Tool Type
Miter Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the old one and replaced it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken handle
Patrick - December 13, 2018
Tool Type
Miter Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Remove screws
Replace handle
Replace handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle broke falling off trailer shelf
Brad - February 13, 2018
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Power Drill
Parts Used
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle was cracked
Hal - December 2, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Unscrewed the old handle and removed.
2. Kept track of which screw goes in the proper hole and where the wires go. Their is only 3 wires.
3. Installed the new handle and inserted the trigger lever and wiring.
4. Screwed it all back together.
2. Kept track of which screw goes in the proper hole and where the wires go. Their is only 3 wires.
3. Installed the new handle and inserted the trigger lever and wiring.
4. Screwed it all back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle broke from carrying in wrong position
Jason - November 23, 2017
Tool Type
Miter Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
1. Remove tops of old handle
2. Take Picture
3. Remove bottom of old handle
4. Disassemble switch mechanism (there is a small spring you will need from the bottom of the old handle)
5. Reassemble in reverse
2. Take Picture
3. Remove bottom of old handle
4. Disassemble switch mechanism (there is a small spring you will need from the bottom of the old handle)
5. Reassemble in reverse
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
