866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Appliance Parts  DeLonghi Parts  5332149100 Generator Gasket

Generator Gasket

Part Number: 5332149100
DeLonghi

We Sell Only Genuine Parts From the Manufacturer – Guaranteed!

Availability: 25+ in stock
Price: $3.99
Quantity:
Order within the next 9 minutes
and your part ships today!
Description:
This is a genuine DeLonghi OEM replacement O Ring that is used to seal the filter to the generator. Over time this part will begin to deteriorate and will need to be replaced as the part is made of silicone. If the O Ring for your coffee maker has snapped or become worn, replacing this part will help restore optimum performance to a variety of models.

Specifications:
Outside diameter: 43.6mm. Inside diameter: 35.2mm. Thickness: 4.2mm.
Product Information
Manufacturer: DeLonghi
Product Number: 5332149100
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
O-Ring
O-Ring
$2.99
Products Compatibility

This item works with the following types of products:

  • • Coffee Maker
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 4 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Spring - 6132101300
Generator Gasket - 5332149100
Cup Tray - 6032107700
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers
full service strip, clean, diagnose and repair
This beautiful bean to cup machine had had a hard life when I picked it up on eBay, but the seller said the machine turned on and warmed up. Critical to a cost effective repair. These things need a deep clean...A complete strip-down..Even when normally working. This machine didn't appear to have ever had a clean.

Strip down revealed the big seals on the piston and infuser were choked with old coffee, and had gone brittle.

The final problem was a leaky o ring on the boiler, and a broken clip.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Espressor machine quit working.
1. From YouTube, I realized that there was cleaning/maintenance that I had not performed (and was not described in the manual).
2. After investigation, I decided to replace some O-Rings and ordered them and some food-safe grease for lubrication.
3. I disassembled the unit based on info form YouTube.
4. Cleaned the parts.
5. Replaced the O-Rings.
6. Lubricated all available sliding surfaces.
7. Reassembled the unit.
8. All is working well and with much less strange noise.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
Water leaked from coffee machine
Opened service door on Delonghi espresso coffee machine, slipped old gasket off and inserted new gasket. Automatic espresso machine worked perfect ever since gasket replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Espresso pucks were wet and not ejecting properly
1. Removed, cleaned and disassembled generator unit.
2. Removed 2 O-rings on generator unit and one on boiler.
3. Lubed and replaced O-rings.
4. Lubed moving parts in generator and reassembled.

Espresso pucks are now packed tight and eject completely. The coffee is now brewing properly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
First sign of a problem was the rinse cycles would intermittently leak to the drip tray. Later, the coffee would intermittently leak to the drip tray.
1. Pulled off the 12-year old loose fitting o-ring.
2. Slipped the new o-ring back on the generator (much tighter fit).
3. Leaking problems solved!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
Gasket on DeLonghi Magnifica failed after 11 years, and dropped into maker interior.
Slid new gasket into place. That was it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, N/a
Was not making good pucks.
Pulled o-ring from generator and installed new one. I did lube the o-ring and cleaned the head while in the machine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Diffuser - 6013213181
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
General maintenance
Removed the DeLonghi espresso machine infuser and disassembled. Replaced both worn O-rings and screen, and generously lubricated with food-approved grease. Finding the correct parts on ereplacementparts.com was easy - great website!
Jeff N.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Generator Gasket - 5332149100
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Food grade lubricant
Generator cylinder was tight.
Remove the cylinder assembly.
Remove all six screws to take apart assembly.
Note: 1. One screw is located under coffee drip spout.
Note: 2. 2 bottom screws and coffee puck evacuation arm screw must be removed to completely disassemble.
Note 3: Spring location inside coffee puck evacuation arm.
Note: 4. Keep track of parts to reassemble correctly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Lower Tube - 5332113800
Generator Gasket - 5332149100
On/Off Knob - 5513222451
Tap - 7313216621
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Needle nose pliers
Steam valve was stiff,
Removed the cover,
Removed the steam knob off the valve assembly
Removed the valve assembly,
Replaced it with a new one.
Replaced the knob that was broke because the valve was so hard to turn if finally broke.
That's it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Generator Gasket - ( 5332149100 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Delonghi EAM-3200.S Generator Ga...

jeffwahl

I finally got to take my hot water generator apart and find 23 silicone o-rings. 1 on top and 2 on bottom. I assume all 3 are this part number. Is that correct, are all 3 o-rings this part number?
WJA
Hello jeffwahl,

By inspecting the parts diagram. It looks like to me that all of the 5332149100 are all the same.

-WJA
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy