Medium
30-60 minutes
This gasket is an OEM direct from the Echo manufacturer. The cardboard composite gasket is made for use with many lawn and garden devices. This item is fitted between the carburetor and the intake insulator, providing protection from friction and leakage. A screwdriver and a hex key are needed in making the replacement. The gasket is sold individually.
Gasket 13001606232
OEM part for: Echo, Little Wonder, Shindaiwa
Part Number: 13001606232
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket will fit the following 41 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Echo
Little Wonder
Shindaiwa
Show More Compatible ModelsThis item works with the following types of products:
- Blower Parts
- Saw Parts
- Trimmer Parts
This part replaces obsolete part #: 13001606231, 13001606230
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Carburetor gasket for echo pb400
Got the 2 gaskets and one was damage the packing was not so good you should pack the gaskets a little better and and they did refund the $ 2.99 but not my shipping
Guest -
August 24, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Dirty carb needed clearned and rebuilt.
Kenneth - November 29, 2017
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
Removed carb. Disassembled cleaned and installed new parts included in kwik kit. Reinstalled carb with new gaskets.
Installed new air filter.
Installed new spark plug.
Started engine and adjusted carb mixture jets to so engine ran smooth at both idle and full throttle.
Blower run and works very well.
Installed new air filter.
Installed new spark plug.
Started engine and adjusted carb mixture jets to so engine ran smooth at both idle and full throttle.
Blower run and works very well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Runs erratically at high speed.
Scott - October 12, 2017
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
1. Replaced the carburetor and installed the new gasket between the carburetor and the engine. (needed 2 gaskets so used the old gasket between the carburetor and the choke input.)
2. Replaced the gas filter.
3. Replaced the throttle cable.
2. Replaced the gas filter.
3. Replaced the throttle cable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
carburetor and all other parts concerning the fuel system needed to be replaced
John - May 4, 2017
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver, gasket scraper
I Replaced the old carburetor and all other parts needed to get this old, old mantis tiller to run again. Once all parts were installed, new gas/oil was installed and the way she went. A few minor carb adjustments and the tiller ran like new. Lessons to be learned is, to drain gas out after each season and don't loan it out to anyone. They seam to stay in running condition better when you know how it was used.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not idle right and oiling gas leak
Michael - August 11, 2016
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver, Cutting pliers
The easiest way I found in any repair is to really study it what you're going to do and take pictures this way if you forget or get overwhelmed go back to the picture and sometimes you need to take a break for a few seconds or a minute do that and retry your task also there are many videos out there on how to perform what you doing so watch them first
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
