Medium
15-30 minutes
This fuel tube is a genuine OEM replacement part sourced directly from Homelite. It is most commonly used in pressure washers. This tube transfers fuel inside the machine. It should be replaced if it is cut, cracked, or otherwise damaged. A wrench set is needed to replace this part. It is sold individually.
Fuel Tube 099980425082
OEM part for: Homelite
Part Number: 099980425082
$5.19
In Stock
Order within the next 34 minutes and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 9 machines
Homelite
HL252300 Pressure Washer View Diagrams & Manuals
UT80522 Pressure Washer View Diagrams & Manuals
UT80953 Pressure Washer View Diagrams & Manuals
UT80546 Pressure Washer View Diagrams & Manuals
UT80977 Pressure Washer View Diagrams & Manuals
UT80522B 2700 PSI Gas Pressure Washer View Diagrams & Manuals
UT80953B 2700 PSI Gas Pressure Washer View Diagrams & Manuals
UT80522A Pressure Washer View Diagrams & Manuals
UT80953A Pressure Washer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Pressure Washer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Fuel Tube -What I ordered but not what I need
I needed a pre-formed fuel line that has one end small and other molded with a larger end to fit carb end of things. Odd but on my pressure washer, that IS the fuel line and fitting sizes. I thought I had ordered what I needed.
I couldnt see the picture on your site clearly enough to discern it was not what I needed. but satisfied with the time I received the product.
Guest -
October 26, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Fuel Tube
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Cracked fuel tube.
Enrique - October 8, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill, Socket set, Wrench Set
Parts Used
Disconnected the old tube and connected the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
A bid carburetor
Gary - September 6, 2022
Tool Type
Pressure Washer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, No other tools needed
Parts Used
When you took the carburetor all carburetor off and put the new on new fuel lines in and out of the fuel tank and put a new breather and new fuel in it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dented tank and fuel assembly clogged
STEVE - July 9, 2022
Tool Type
Pressure Washer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
Took it apart and put it back w new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel leak when running
John - June 5, 2020
Tool Type
Pressure Washer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set
Parts Used
Pulled the plastic covers off the carb then the fuel tank to access the fuel hose.
Only down side was the Covid-19 wait on getting the part
Only down side was the Covid-19 wait on getting the part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor clogged with old gas
Steven - July 9, 2018
Tool Type
Pressure Washer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set, Wrench Set
1. Unbolted engine mount bolts
2. Unbolted 2 cap nuts on end of carb/air assembly/ w/choke on and gas in off position
3. Pulled off air cleaner assembly while carefully disconnecting air breather hose
4. Take off air cleaner gasket
5. Pulled gas hose off carb assembly after using pliers to slide spring clamp up 1 inch from end(drain old gas into approved container)
6. 3 bolts hold gas tank, 2 under side of tank and 1 on other side going horizontally/ remove and slowly guide gas tank up and guide fuel line out as you remove tank/ remove spring clamp and replace hose/ if gas only trickled out of hose when draining also replace tank outlet which screws into tank/ inspect inside of tank for corrosion.
7. Pull off carb assembly - inspect gasket/ replace if needed(not usually needed to change) replace with new carb assembly.
8. Put tank back on while guiding fuel tube as was originally routed and connect to carb assembly and guide block/ use pliers and move clamp back to 1/2 inch from end of tube.
9. Put air assembly gasket back on- make sure that gasket is oriented correctly to air slot on carb assembly- place choke lever on carb so that it works on the butterfly valve on carb when moved
10. Place air assembly back on and connect air breather tube back on air breather/ put cap nuts back on and tighten firmly but not too tight.
11. Put engine back in place align bolts with nuts on top and tighten firmly.
2. Unbolted 2 cap nuts on end of carb/air assembly/ w/choke on and gas in off position
3. Pulled off air cleaner assembly while carefully disconnecting air breather hose
4. Take off air cleaner gasket
5. Pulled gas hose off carb assembly after using pliers to slide spring clamp up 1 inch from end(drain old gas into approved container)
6. 3 bolts hold gas tank, 2 under side of tank and 1 on other side going horizontally/ remove and slowly guide gas tank up and guide fuel line out as you remove tank/ remove spring clamp and replace hose/ if gas only trickled out of hose when draining also replace tank outlet which screws into tank/ inspect inside of tank for corrosion.
7. Pull off carb assembly - inspect gasket/ replace if needed(not usually needed to change) replace with new carb assembly.
8. Put tank back on while guiding fuel tube as was originally routed and connect to carb assembly and guide block/ use pliers and move clamp back to 1/2 inch from end of tube.
9. Put air assembly gasket back on- make sure that gasket is oriented correctly to air slot on carb assembly- place choke lever on carb so that it works on the butterfly valve on carb when moved
10. Place air assembly back on and connect air breather tube back on air breather/ put cap nuts back on and tighten firmly but not too tight.
11. Put engine back in place align bolts with nuts on top and tighten firmly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
