Watch The
Repair Video

Drain Valve

Part Number: N286039

53 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: NB286039, A17038, A06891 and SS-2707.

Product Information

Manufacturer: Porter Cable, DeVilbiss, Makita, Black and Decker, Delta, DeWALT, Bostitch, Husky

Product Number: N286039

Classification: Part

Weight: 0.01 lbs.

Also Known As: Tank Drain Petcock, Flapper Valve

Shipping: Ships Worldwide

Specifications

Thread 18 TPI

Description:

When you use a compressor the air that is compressed inside the tank will condensate and leave water inside the tank.
If it is left in the tank too long it can start to rust out the inside of the tank.

The Drain Valve should be opened up and let the water drain out.
The water will build up if you have a tendency to leave air in your tank for a long period of time.
You should drain your tank after each time it is used to prevent this from happening.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Porter Cable

DeVilbiss

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Compressor

Questions & Answers

Sort by

Showing questions 1-10 of 19
< Prev Next >

1/2” thread

Bill asked on 2018-10-04

Hello Bill, thank you for your question. This drain valve has 1/4" threading. Looking up the part number N286039, it's thread count is 18 threads per inch, which is 1/4". For 1/2" threading, you are looking for a drain valve with a 14 thread count. I hope this information helps.

5 people found this helpful.

Did this question help you?

Will this drain valve fir on my compressor

Michael for model number C2005 Type 3 asked on 2019-01-23

Hello Michael, thank you for your inquiry! Yes, part N286039 will fit on your model C2005 type 3 air compressor. I hope this information helps!

3 people found this helpful.

Did this question help you?

Is this correct for my compressor?

Paul for model number C2002 Type 8 asked on 2019-08-16

Hello Paul, thank you for your question. Yes, the drain valve Part Number: N286039 is the correct one for that unit. Good luck with your repair!

1 person found this helpful.

Did this question help you?

Switch I think is bad

Donald Davenport asked on 2019-05-24

Hello Donald, thank you for contacting us. We will need the model number for the unit in question, and a brief description of the symptom it is experiencing. We look forward to hearing back from you.

1 person found this helpful.

Did this question help you?

Will this drain plug fit on my really old compressor?

Ken Brack for model number Porter Cable C2002 type 8 asked on 2019-05-20

Hello Ken, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: N286039. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Did this question help you?

The model number on my Porter Cable Compressor tank is PXCM601. Will this drain valve work?

Daniel for model number PXCM601 asked on 2020-03-06

Hello Daniel, thank you for your inquiry. Drain valve N286039 is the correct part for your model PXCM601. We hope this information helps.

Did this question help you?

I need the cast iron plug that the tank drain (diagram #34) goes into. I think it is 2" to 1/4" reducer bushing. Mine was leaking air by the threads and it is no longer usable from removal.

Christhoper for model number CPLC7060V-1 asked on 2020-02-10

Hello Christhoper, thank you for your inquiry. For your model CPLC7060V (1), the correct drain valve is part number N286039. We hope this information helps!

Did this question help you?

Please verify which drain valve will work as a replacement given my model. Thanks

Ken for model number PRFB5520VP-WK asked on 2020-02-02

Hello Ken, Thank you for your question. We apologize, but the part you're looking for is discontinued and no longer available from our website. We suggest getting in contact with the manufacturer to find a substitute replacement part that would be compatible to your model. We hope this helps.

Did this question help you?

The compressor will not shut off at the 150 psi, it just blow the relief valve. I replaced it, still same problem. I put in a new pressure switch and still the same, thinking I wired it wrong I put in a 2d new switch, same problem. Shall I just blow it up

Larry for model number 150 psi pancake compressor cable porter asked on 2019-12-28

Hello Larry and thank you for writing. We wouldn't suggest to blow it up yet, let us try to help. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. As it stands it might be just a faulty regulator # A11403, but we can not confirm this without the model number. We hope this helps. Please contact us anytime if you require further assistance.

Related Parts: Regulator

Did this question help you?

Will this part fit a Stanley Bostich CWC 156? The existing discharge tap measures approx. 5/8" in diameter. It is REF 15; Code 713038000. Thank you

Marty for model number Stanley Bostich CWC 156 asked on 2019-12-09

Hello Marty, thank you for your inquiry. Drain valve N286039 is not compatible with your model CWC156. I apologize for the inconvenience.

Did this question help you?

Showing questions 1-10 of 19
< Prev Next >

Repair Instructions: Submitted by Customers Like You

24 of 28 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Adjustable Wrench, penetrating oil

The original drain valve would not function properly (valve threads stripped)

I used penetrating oil to release the original equipment drain valve from the compressor tank, as it had rusted. I sprayed several applications of the oil onto the stem threads of the compressor and allowed 10-15 minutes between treatments. I didn't want to risk damaging the threads of the stem.

It was then easy to remove the defective drain valve. I applied teflon tape to the threads of the new valve, in order to facilitate removal in the future.

The replacement valve is working good again.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

8 of 8 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Adjustable Wrench

Drain valve broke

The old drain valve had rusted badly and I broke off the handle. With a little persuasion I used a wrench to remove the old valve. I cleaned up the threads in the tank with a small wire brush. I applied a little Teflon tape to the new valve and threaded it in place. Works great now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

8 of 9 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Drain valve would't shut off

Unscrewed old valve & screwed new valve in. It fit perfect & held pressure fine.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

6 of 7 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Drain valve worn

Removed the worn drain valve with a wrench. Then installed the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 6 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Adjustable Wrench

Someone stripped the drain valve in a Porter Cable compressor

eReplacemntParts furnished the correct part in a very timely fashion and with only and adjustable wrench and some teflon tape I had the compressor up and running in minutes

Did you find this story helpful?

Thanks for voting and helping fellow customers!

4 of 5 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Old drain plug leaking

Very easy to do, use a wrench to remove the old one, and a wrench to replace it with the new drain valve.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 7 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Step son cross threaded drain valve and just handed compressor back to me saying "Sorry dude"

Just R&R with a wrench...new drain plug even had leak stop stuff already in place...great job e-replacement parts, I put the magnetic business card you included with my order on my tool box.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

3 of 3 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Felt Air Filter - 265-17

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Compressor drain defective. Air filter dirty.

Removed old drain valve that was defective with a wrench. It would not open to release fluid in compressor. Once the compressor was drained, I screwed the new drain valve in place snugly, and simply pulled the filter out and placed the new one in. Done!!!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Adjustable Wrench, None

Original drain valve leaked and failed.

Simple unscrew the old valve and replace with new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Adjustable Wrench

Faulty drain valve

Removed the faulty drain valve with a wrench, then installed the new one it with the same wrench.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

53 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Got the right part. My compresser is working again..

Shipping time was as promised.

Guest - November 17, 2020 Verified Purchase

Much needed

We needed this little valve in order to use our compressor. Such a little thing, but without it we would have had to buy a whole new compressor!! You saved us. The valve was easy to search for on your site. It even had a good picture so that we could make sure that it was the right part. It was also delivered very quickly. Compressor is back to working like usual. You are the greatest!!

Beverly - November 15, 2020 Verified Purchase

Compressor water drain

Perfect fit and works better/easier than original drain

Guest - September 7, 2020 Verified Purchase

Drain valve

The part was correct. Arrived when you said it would.

Guest - August 14, 2020 Verified Purchase

Part worked perfectly

Pleasantly surprised as part was an updated version and was much imroved over the OEM part.

Guest - July 13, 2020 Verified Purchase

Fast delivery. Good price.

Exactly what I needed

Guest - June 17, 2020 Verified Purchase

Easy to replace.

Works better than original part.

Guest - June 14, 2020 Verified Purchase

DRAIN VALVE FOR AIR COMPRESSOR

When a part THIS SMALL goes bad > the whole machine is unusable....EReplacementParts had the valve at a good price > took my payment on the computer > and sent it to me the part in the mail.....DOES IT GET ANY EASIER?

Guest - June 9, 2020 Verified Purchase