Product Information
| Manufacturer: Weber |
| Product Number: 69898 |
| Classification: Part |
| Weight: 0.36 lbs. |
| Shipping: Ships Worldwide |
Description:
| This crossover tube is an OEM part direct from the Weber manufacturer. Made use with several gas grills, this item includes four drip shields on a bracket. The tube transfers the flame from the left main burner to the right tubes. Please refer to the manual for further instructions. The crossover tube is sold individually. A pair of pliers, screwdriver and a socket set is helpful in making the replacement. |
Compatibility
the 19 compatible machines
This part is compatible with the following machines:
Weber
46510001 Spirit E-310, Lp, Blk, Gas Grill
47510001 Spirtit E-310, Ng, Blk, Gas Grill
46513101 (2014)(LP) Spirit E-310 w/Gbs/Griddle
47513101 (2014)(NG) Spirit E-310 w/Gbs/Griddle
46710001 (2013)(LP) Spirit E-320 Grill
46500401 (2013) Spirit Sp-310 Lp Ss (Us/Ca/Mx)
46700401 (2013) Spirit Sp-320 Lp Ss (Us/Ca/Mx)
46800401 (2015) Spirit Sp-330 Lp Ss (Us/Ca/Mx)
46810001 (2015) Spirit E-330 Lp Blk (Us/Ca/Mx)
47700401 (2013) Spirit Sp-320 Ng Ss (Us/Ca)
47510001 Spirtit E-310, Ng, Blk, Gas Grill
46513101 (2014)(LP) Spirit E-310 w/Gbs/Griddle
47513101 (2014)(NG) Spirit E-310 w/Gbs/Griddle
46710001 (2013)(LP) Spirit E-320 Grill
46500401 (2013) Spirit Sp-310 Lp Ss (Us/Ca/Mx)
46700401 (2013) Spirit Sp-320 Lp Ss (Us/Ca/Mx)
46800401 (2015) Spirit Sp-330 Lp Ss (Us/Ca/Mx)
46810001 (2015) Spirit E-330 Lp Blk (Us/Ca/Mx)
47700401 (2013) Spirit Sp-320 Ng Ss (Us/Ca)
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
My grill is 4 years old and the frame was still in great shape. However, flame units were worn out.
1. Removed the grates.
2. Took the flavor bars out (they were worn out).
3. Removed the screws that hold down the crossover tube (worn out).
4. Removed the burner tubes starting from the left side (still in good shape, did not replace).
5. Gave the grill a good cleaning.
6. Attach the middle burner first to the crossover bar, found this to be the best starting point.
7. Attach the right then the left burning tube.
8. Reattach the crossover tube to the grill.
9. Put the flavor bars back.
10. Replaced the grates. DONE
2. Took the flavor bars out (they were worn out).
3. Removed the screws that hold down the crossover tube (worn out).
4. Removed the burner tubes starting from the left side (still in good shape, did not replace).
5. Gave the grill a good cleaning.
6. Attach the middle burner first to the crossover bar, found this to be the best starting point.
7. Attach the right then the left burning tube.
8. Reattach the crossover tube to the grill.
9. Put the flavor bars back.
10. Replaced the grates. DONE
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Nutdriver
Rusted out
Removed the old parts and replace them with new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Crossover tube broke.
1. Removed the old tube.
2. Put the new one and fired right up.
2. Put the new one and fired right up.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Socket set, Wrench Set
Replace worn gas manifold & rusted out crossover tube
1. Remove control knobs & front cover
2, Disconnect igniter wiring & gas connection on manifold
3. Remove & replace manifold
4. Remove screws from end of burner tubes thus allowing removal & replacement of crossover tube.
2, Disconnect igniter wiring & gas connection on manifold
3. Remove & replace manifold
4. Remove screws from end of burner tubes thus allowing removal & replacement of crossover tube.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy to order - Fast delivery!
It was a breeze to remove non-working crossover tube and install new one! Grill works perfect!
Guest -
February 25, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
| Manufacturer: Weber |
| Product Number: 69898 |
| Classification: Part |
| Weight: 0.36 lbs. |
| Shipping: Ships Worldwide |
Repair Guides
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
