eReplacementParts.com
877-346-4814
Jet Parts
Preferred Partners of
Repair Parts Home  Power Tool Parts  Jet Parts  10605002A1 Coil Spring With Cover
photo thumbnailphoto thumbnail360 degree photo thumbnail

Coil Spring With Cover

Part Number: 10605002A1
JetWilton
Availability: 25+ in stock
Price: $41.42
Ships within 1 business day

*This part replaces obsolete part #: 10605202, 5626171, 10905203 and 10604902A2.

Product Information
Manufacturer: Jet, Wilton
Product Number: 10605002A1
Classification: Part
Weight: 0.25 lbs.
Shipping: Ships Worldwide
Description:
This is an Original Manufacturer Sourced replacement part for a Drill Press. This is a Metal Spring and a Metal Cap/Cover that are a part of mechanism that Adjusts the Drill Height. If the adjusting Wheel/Knob Does not retract the spring may be damaged and should be replaced.
Frequently Purchased With
Products Compatibility

This item works with the following types of products:

  • • Drill
  • • Drill Press
Questions & Answers

This part might fit my old heavy duty Jet drill press. What is the ID of the spring cover? A cover with an ID of 2"5/8" and a hole that could accommodate a 15/32" shaft would be worth a try. Let me know if this part or a similar part would work.
Ed for model number Jet 420 drill press asked on 2019-09-19
Good Day Ed. Thank you for your question in regards to your unit. We do apologize but we were not able to locate a parts list for your model number, (Jet 420 drill press). For further assistance, we recommend calling the manufacturer of the equipment directly. They may be able to provide you with the part number that you need. Once you have this information, please feel free to check back with us for pricing and availability information. Best Regards.
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Drill Press
Parts Used:
Coil Spring With Cover - 10605002A1
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Quill assembly dropped down to table = broken spring
Unplugged the Drill Press
Removed the Chuck(less weight to hold while twisting up the spring)
Removed the spring cover (two nuts)
Removed the entire assembly to inspect clean and lube
Re-inserted assembly
Aligned spring with slot in shaft
Twisted up spring until assembly would stay up
Used original Big Inside Washer, new one supplied didn't fit
Re installed two nuts, tightened
Re- install Chuck and Ops Check
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Drill Press
Parts Used:
Coil Spring With Cover - 10605002A1
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Adjustable Wrench
Quill return spring on jet drill press broke.
1. Removed the two nuts holding the coil spring and cover in place.
2. Installed the new coil spring and cover.
3. Started the first nut by hand to keep the coil spring from falling off.
4. Twisted the coil spring to put tension on the assembly until the tension was enough to bring the quill up and hold it in place.
5. Tightened down on the first nut but not so much that it didn't allow the spring to move freely.
6. Added the second locking nut holding the first nut in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Drill Press
Parts Used:
Coil Spring With Cover - 10605002A1
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Broken return spring on spindle.
1. Lock spindle in up position.
2. Remove spring cover retaining nuts (2)
3. Remove old broken spring.
3. Insert new spring align onto shaft.
4. Replace spring cover plate.
5. Adjust spring tension
6 Thread retaining nuts onto spring shaft.
7. Tighten nuts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Drill Press
Parts Used:
Coil Spring With Cover - 10605002A1
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Drill bit moved a litlle to the left before touching wood.
Followed the eReplacement video instructions.
I used a piece of 2” x 4” to keep the drill shaft fixed in the uppermost position (spring uncoiled, mínimum tensión)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Drill Press
Parts Used:
Coil Spring With Cover - 10605002A1
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Coil spring on quill breaks every three or four years. Drill press is fine in all other aspects so $35.00 is a no brainer.
Removed two nuts holding spring cover on. Replaced with new cover containing spring, hand wound to correct tension, pushed mating tab on cover into casting on press and re-installed two nuts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Drill Press
Parts Used:
Coil Spring With Cover - 10605002A1
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Spring broke on sears drill press
Spring broke on a sears drill press they told me at sears they no longer made it I called replacement parts asked for a spring for a Jet drill press figured the companys didn't make the spring some one else did. I was right works great same spring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Drill Press
Parts Used:
Coil Spring With Cover - 10605002A1
Repair Difficulty:
Expert
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Spring Broke
Replaced Spring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great How-to Video and Service
    Watched the ereplacement's video on how to replace the coil spring on my drill press, then ordered the part.. Received very quick service on mailing and receiving the part. Drill press back in service.
    Guest - September 1, 2020 Verified Purchase
    Repair went well
    All went as planned. Good replacement. Easy to obtain from this company. Thanks.
    Guest - July 8, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Jet, Wilton
    Product Number: 10605002A1
    Classification: Part
    Weight: 0.25 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Coil Spring With Cover
    Articles:
    Step-by-step instructions for removing and installing the coil spring on your Jet drill press....
    February 28, 2018

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal