Product Information
Description:
This is an authentic OEM part for use with Jet Drill Presses. The feed shaft rotates to raise and lower the chuck when you turn the feed handle. A drill press spindle can become bent if it is placed under too much strain. If this happens, you will need to replace it. This part is sold individually. The tools that you will need to replace the feed shaft is a drill chuck removal tool that works with your drill press, retaining ring pliers, and a set of wrenches that will work with your press's nuts. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Drill
- • Drill Press
Repair Guides
Articles:
Step-by-step instructions for removing and installing the feed shaft on your Jet drill press....
February 28, 2018
|
Questions & Answers for Feed Shaft Assy
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Drill Press
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, Wrench Set, Adjustable Wrench, Needle noise pliers
Feed handle broke at collar during transporting
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Drill Press
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Feed shaft was worn and set ring was cracked
Remove all of the part opposite the feed shaft. Replace in the correct position with the quill. I replace the handles also. Remove screw securing set ring, remove it and replace it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
Articles:
Step-by-step instructions for removing and installing the feed shaft on your Jet drill press....
February 28, 2018
|