eReplacementParts.com
877-346-4814
Briggs and Stratton Parts
Preferred Partners of
photo thumbnailphoto thumbnail360 degree photo thumbnail

Carburetor

Part Number: 498298
Briggs and StrattonToro
Availability: 22 in stock
Price: $155.62
Order within the next 9 hours
and your part ships today!

*This part replaces obsolete part #: 495951.

Product Information
Manufacturer: Briggs and Stratton, Toro
Product Number: 498298
Classification: Part
Weight: 0.95 lbs.
Shipping: Ships Worldwide
Description:
This genuine OEM sourced replacement part is designed for use with lawn and garden equipment engines. The purpose of a carburetor is to mix air and gas before the fuel mix goes to the engine.

If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This assembly includes a metal body carburetor and two (2) composite material gaskets.

When replacing carburetor it is advised that you also replace carburetor gaskets to ensure proper air tight seal for optimum performance. You will need a screwdriver to perform this repair.

• Remove the air filter cover
• Remove the air filter base
• Remove the throttle cable
• Remove the fuel lines
• Remove the carburetor
• Install the new carburetor
• Reinstall the fuel lines
• Reinstall the throttle cable
• Reinstall the air filter cover
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Briggs and Stratton

1134-0 Portable Generator
112202-0814-01 Engine
112202-0826-01 Engine
112202-0826-02 Engine
112202-0829-01 Engine
112202-0833-01 Engine
112202-0843-01 Engine
112202-0845-01 Engine
112202-0847-01 Engine
112202-0848-99 Engine
112202-0854-01 Engine
112202-1516-01 Engine
112202-4001-01 Engine
112202-4016-01 Engine
112212-0822-01 Engine
112212-0825-01 Engine
112212-0834-01 Engine
112212-0837-01 Engine
112212-0840-99 Engine
112212-0842-01 Engine
112212-0846-01 Engine
112212-0852-99 Engine
112212-0853-01 Engine
112212-1523-01 Engine
112212-4023-01 Engine
112231-0811-01 Engine
112232-0802-01 Engine
112232-0816-01 Engine
112232-0817-01 Engine
112232-0818-01 Engine
112232-0820-01 Series Engine
112232-0820-02 Series Engine
112232-0820-03 Series Engine
112232-0820-04 Series Engine
112232-0820-05 Series Engine
112232-0820-06 Series Engine
112232-0820-07 Series Engine
112232-0821-01 Series Engine
112232-0823-01 Series Engine
112232-0824-01 Series Engine
112232-0827-01 Series Engine
112232-0828-01 Series Engine
112232-0830-01 Series Engine
112232-0831-01 Series Engine
112232-0832-01 Series Engine
112232-0835-01 Series Engine
112232-0836-01 Series Engine
112232-0838-01 Series Engine
112232-0839-01 Series Engine
112232-0844-01 Series Engine
112232-0849-01 Series Engine
112232-0850-01 Series Engine
112232-0851-01 Series Engine
112232-0855-01 Series Engine
112232-1535-01 Series Engine
112232-1538-01 Series Engine
112232-1538-02 Series Engine
112232-4002-01 Series Engine
112232-4006-01 Series Engine
112232-4006-02 Series Engine
112232-4007-01 Series Engine
112232-4035-01 Series Engine
112232-4035-02 Series Engine
112232-4036-01 Series Engine
112232-4038-01 Series Engine
112232-4038-02 Series Engine
Toro
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Engine
  • • Generator
  • • Vacuum
Questions & Answers

Could you please furnish which carburetor is compatible. Thank you
Greg for model number 135202-0119-01 asked on 2022-04-28
Hello Greg, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 498298. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Repair Instructions: Submitted by Customers Like You
5 of 8 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Carburetor - 498298
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, Adjustable Wrench
Carb stopped up, unit was stored with gas in tank
Removed carb. Removed gas tank. Cleaned gas tank thoroughly. Replaced all gaskets, remounted tank, installed new carb. Started motor and adjusted carb.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Engine
Parts Used:
Screw - 694515
Fuel Tank Gasket - 692241
Carburetor - 498298
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Star bit
Carburetor old and clogged
Remove gas tank. Remove carburetor. Clean area and install new carb.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Carburetor - 498298
Carrier Plate - 594935003
Drive Control Cable - 532181699
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Bearing press
Tiller Hard to start, trimer had drive cable broke & carrier plate broken
1. Removed fuel tank and carb from tiller and cleaned out tank.
2. Installed tank and crab. Filled gas tank and ops checked carb (tiller was hard to start and had to pour a little gas down the carb). After initial start up, I let it run for 15 mins. After shutdown, I attempted an other start after 2 hours and the tiller started on the first pull.

1. Removed carrier plate assembly and discovered a bearing had come apart. Purchased a new bearing at the auto parts store and installed. This operation required the use of a press to remove the gear.
2. Installed carrier plate
3. Removed and replaced drive cable and completed a successful operation check
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Generator
Parts Used:
Carburetor - 498298
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set
Engine old. Not running well.
Removed fuel tank and carburetor. Removed old carburetor from tank. Cleaned gasket faces. Cleaned out fuel tank with carburetor cleaner and air. Installed new carburetor. Returned fuel tank to engine. Starts easy and runs smooth. FYI. Save youself time and trouble by just getting a new carburetor instead of trying to rebuild an old corroded aluminum one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Generator
Parts Used:
Carburetor - 498298
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
hard to start
removed old carb
cleaned all parts
installed new carb
adjusted idle
replaced old gas with fresh.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 7 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Carburetor - 498298
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
Needed new carb.
Take off air filter, then remove throttle cable and fuel lines. Take off carburetor. Put new carb on and reattach lines and throttle cable. Put the air filter back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great service.
    Exact part I needed. A pleasure to do business with.
    Guest - April 15, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Briggs and Stratton, Toro
    Product Number: 498298
    Classification: Part
    Weight: 0.95 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal