eReplacementParts.com
877-346-4814
Husqvarna Parts
Repair Parts Home
  
Lawn Equipment Parts
  
Husqvarna Parts
  49-841 Carburetor Bowl Gasket

Carburetor Bowl Gasket 49-841

OEM part for: Oregon, Husqvarna, Toro

Part Number: 49-841


Install
Videos!
Carburetor Bowl Gasket - 49-841:Oregon 360 View
Carburetor Bowl Gasket - 49-841:OregonCarburetor Bowl Gasket - 49-841:OregonCarburetor Bowl Gasket - 49-841:Oregon 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Easy 15-30 minutes (16 rated repairs)?
OEM: Original Equipment Manufacturer ?
OregonHusqvarnaToro
Does this fit my product?

Product Description ?

This is a Genuine OEM replacement part designed to work with a variety of Engines. This part is made out of Rubber and it is Sold Individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This item works with the following types of products:

  • Engine Parts
  • Snowblower Parts

This part replaces obsolete part #: 631028A, 631028

Customer Part Reviews ?

5
Average Rating (out of 5):
7 Reviews
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Repair gasket was much better than the original gasket Thanks so much
    Repair gasket was great
    Guest - March 24, 2021 Verified Purchase
    worked great.
    Had my mower up and running in about 5 minutes with this simple gasket
    Guest - July 24, 2020 Verified Purchase
    Right part
    This was the right part that i needed and fit my machine! Thank you
    Guest - May 15, 2020 Verified Purchase
    Exactly what I needed!
    Received the parts on time and they were exactly what I needed. Ordering was easy too! I will use them again.
    Guest - April 22, 2020 Verified Purchase
    Worked perfect.
    Just a gasket but worked perfect. Price seemed a bit exorbitant. Service was great.
    Guest - November 11, 2019 Verified Purchase
    replacement part
    the parts I ordered fit great and my lawnmower runs well.
    Martin - September 30, 2019 Verified Purchase
    everything was fine .thank you
    good service easy to do
    Guest - June 21, 2019 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carburetor Bowl Gasket


    What is the diamter of the oring?
    Jae for model number Toro 38185 asked on 2023-11-26
    Hello Jae, Thank you for your inquiry. We show this gasket as approximately 2 inches in diameter. We hope this helps.
    eReplacementParts Team November 26, 2023
    What is the diameter of the oring?
    Jae for model number Toro 47P asked on 2023-11-26
    Hello Jae, Thank you for your inquiry. We show this gasket as approximately 2 inches in diameter. We hope this helps.
    eReplacementParts Team November 26, 2023

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (16 rated repairs)?

    Leaking gas

    Tim - September 19, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Lawn Mower

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Pliers, Socket set

    Replaced bowl and gasket, mower works fine.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Lawn mower was leaking gas from the carburetor bowl

    Dwight - October 4, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Wrench Set, Fingers, bench, light

    First try: Tried to set the gasket in the bowl lip and reattach the bowl. Wrong.
    Second try: Slightly stretch the gasket and put in place on the lip of the carburetor where the bowl attaches; then reattach the bowl. Tighten the bowl. Ooops. Too much tightening, seemed to prevent the float from dropping down far enough to let in more fuel. So loosened the bowl slightly, watching the compression on the gasket. Success!
    Now that the engine runs healthy, I can invest in a new blade and some other touches.
    By the way, I ordered a gasket and received a package of 8. Anybody else want a gasket?

    (Side note: Initially I tried to use an O-ring from the auto store as a gasket. Fit in the bowl lip, but seemed too fat for the float; did not try fitting it on the lip of the carburetor because I was not yet that smart.)
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Running rough

    patrick - May 21, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Wrench Set

    Remove and replaced air filter . Removed bowl nut at bottom of fuel bowl cleaned out small passages on nut replaced bowl gasket . Removed blade and plastic cover to access old belt and replaced with new one . Success runs and power drives great ! all so sharped blade while I had it out.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Fuel leak and broken pull rope

    michael - October 25, 2022
    Tool Type

    Snowblower

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers

    Installed gasket and installed new rope
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Fuel contaminated carburetor

    Daniel - November 24, 2021
    Tool Type

    Snowblower

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Screwdriver, Pliers, Carb cleaner

    I was certain cleaning the old carb parts was all that would be required to get the snowblower to run again. After soaking old parts in carb cleaner and reassembling old parts. The snowblower wouldn’t even try to run. New jet, with new Orings, new needle valve and seat, new bowl nut and gasket were parts installed to finally get the motor to run. I’m uncertain which part was the culprit, but it runs fine now.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Snowblower was leaking fuel from the carb bowl.

    Thomas - January 16, 2021
    Tool Type

    Snowblower

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Nutdriver

    Installed new carb bowl gasket, o-ring and bowl nut washer. Still leaks - ordered new carb.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No instructions for for the up grade for the battery relocation.Took a very long time for delivery( allmost 2months). The parts that were of high quality.

    William - June 26, 2020
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Power Drill, Socket set

    Remvove and replace old battery box.Rotate support bracket to fit new box
    Relocate battery box
    Install new battery
    Repl fuel bowl and casket
    Repl primer bulb
    Primed and started the lawn mower. Runs ( Ok )
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Transmission not working

    Bruce - September 24, 2019
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Pliers, Socket set, Wrench Set, Nutdriver

    Replaced drive belt and traction cable
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Would not start.

    Jeffrey - July 31, 2019
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Socket set, Wrench Set

    Removed the carburetor, dismantled, cleaned and installed new parts.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Gasket leaking gas

    Mark - February 16, 2019
    Tool Type

    Snowblower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set, Wrench Set, Allen wrenches

    Removed cover around carburetor
    Removed bowl and replaced gasket.
    Replaced bolt for bowl with new nut washer
    Replaced cover and filled with gas.
    No leak
    Thanks
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal