Easy
30-60 minutes
This authentic manufacturer carbon brush set is a part of the motor assembly in angle grinders. It includes two brushes, each with lead wires. The brushes are responsible for transferring the electrical current to the armature, and this allows the motor to operate. Over time, it is common for carbon brushes to wear down due to friction, aging, and frequent usage. A worn-out brush will not be able to make contact with the armature and send the electrical current needed for starting. The carbon brushes will need to be replaced if the angle grinder shows reduced power output, or complete motor failure, and you have ruled out all other motor-related issues. Begin the repair by unplugging the angle grinder from the power source. Locate the brush holders on the side of the motor housing and carefully remove the brush holders. Remove the faulty brushes from the holders and position the new ones in their place. Reinstall the brush holders back into the motor housing. Check that there is adequate contact between the brushes and the armature.
Carbon Brush Set, Cut-off 316065460
OEM part for: Metabo
Part Number: 316065460
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Metabo
This item works with the following types of products:
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carbon Brush Set, Cut-off
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Brushes wore out
Tool Type
Grinder
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Needed nose pliers
Parts Used
Dead
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Checked off/ on switch, ok
Pulled brushes, found defective.
Ordered, installed, reassembled,
Plugged in and turned on. E-replacement parts are factory parts and they are very knowledgeable! Awesome people!!! Simply the best around!!!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
