eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home
  
Power Tool Parts
  
Makita Parts
  CB401 Carbon Brush Set Cb-401

Carbon Brush Set Cb-401 CB401

OEM part for: Makita

Part Number: CB401


Install
Videos!
Carbon Brush Set Cb-401 - CB401:Makita 360 View
Carbon Brush Set Cb-401 - CB401:MakitaCarbon Brush Set Cb-401 - CB401:MakitaCarbon Brush Set Cb-401 - CB401:Makita 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Easy 15-30 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Makita replacement part
rnSet of 2 Carbon Brushes in plastic housing for easy installation.rnrn

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 15 machines

Makita

NHP1310 Drill View Diagrams & Manuals
6820V Screwdriver View Diagrams & Manuals
6904VH Impact Wrench View Diagrams & Manuals
6905H Impact Driver View Diagrams & Manuals
HP1030 Hammer Drill View Diagrams & Manuals
6403 Electric Drill View Diagrams & Manuals
6402 3/8" Electric Drill View Diagrams & Manuals
6302HK (Type 1) Drill View Diagrams & Manuals
NHP1030 Drill View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Drill Parts
  • Screwdriver Parts
  • Impact Wrench Parts
  • Impact Driver Parts
  • Hammer Drill Parts
  • Electric Drill Parts

This part replaces obsolete part #: 643401-5, 195005-4, 191910-3

Customer Part Reviews ?

5
Average Rating (out of 5):
1 Review
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Worked as it should
    Parts were as expected, excellent fit, excellent results.
    Jerry - April 20, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set Cb-401


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (3 rated repairs)?

    Brushes were worn

    Donald - October 12, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Pliers, None

    Removed old brush, and put in new brush! Very easy and simple to do! It was great!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken brush case. Worn out cord and guard.

    DC - July 30, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    1. Opened the drill case (handle) and cleaned out the collected dirt etc.
    2. Disconnected the wires from the brushes.
    3. Removed the brushes.
    4 .Freed up the power cable from the switch (small screwdriver).
    5. Soldered the ends of the new power cord and inserted into the switch.
    6. Installed the brushes.
    7. Replaced the cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Drill would not turn on.

    Charles - April 8, 2021
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Emery cloth

    Tested to see if power was going thru the power cord, then the switch.
    Then to make sure the switch was bad, I bypassed the switch and put power to the motor, the drill was secured. The motor spun.
    Replaced the bad switch
    Replaced the the brushes, just because I had the drill open and due to its age.
    I cleaned the armature.
    I regreased the bearings.
    Put the unit back together.
    Retested the drill again to if turned on, it did.
    Job done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal