Handle Cover 150621-9
Part Number: 150621-9
Order within the next 10 hours
and your part ships today!
and your part ships today!
Product Information
Description:
This is a genuine item that is supplied by the original manufacturer for use with Makita drills and screwdrivers. It is a high-quality replacement for a missing or damaged handle cover, make sure to refer to the appropriate diagrams of your model for the correct application of this component. This durable part is made of plastic material and is sold individually, please note the hardware to secure it is sold separately. |
Products Compatibility
This item works with the following types of products:
- • Drill
- • Electric Drill
- • Screwdriver
Questions & Answers for Handle Cover
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Electric Drill
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Emery cloth
Drill would not turn on.
Tested to see if power was going thru the power cord, then the switch.
Then to make sure the switch was bad, I bypassed the switch and put power to the motor, the drill was secured. The motor spun.
Replaced the bad switch
Replaced the the brushes, just because I had the drill open and due to its age.
I cleaned the armature.
I regreased the bearings.
Put the unit back together.
Retested the drill again to if turned on, it did.
Job done.
Then to make sure the switch was bad, I bypassed the switch and put power to the motor, the drill was secured. The motor spun.
Replaced the bad switch
Replaced the the brushes, just because I had the drill open and due to its age.
I cleaned the armature.
I regreased the bearings.
Put the unit back together.
Retested the drill again to if turned on, it did.
Job done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Drill
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Would not run
Removed defective switch, replaced with new switch and the recommended new handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Power Drill
Variable switch failed
The drill was an older style drill so I ordered the switch and the the updated handle cover.
Removed the old handle cover, then made a wiring diagram of the switch wires.
Removed the old switch and installed the new one.
Install the new handle cover.
Now it works like new again.
Removed the old handle cover, then made a wiring diagram of the switch wires.
Removed the old switch and installed the new one.
Install the new handle cover.
Now it works like new again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
makita drill repair
perfect fit, good price,easy look up
Guest -
November 30, 2020
Verified Purchase
wrong size
Part was 5 mm smaller than original. Had to modify the old cover to fit the new switch.
Guest -
June 17, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information