866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Milwaukee Parts  22-18-0710 Carbon Brush

Carbon Brush

Part Number: 22-18-0710
Milwaukee
Availability: 25+ in stock
Price: $4.97
Quantity:
Order within the next 13 hours
and your part ships today!
Description:
Genuine Milwaukee replacement part

Includes 1 carbon brush with wire lead attached, Sold individually

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Product Information
Manufacturer: Milwaukee
Product Number: 22-18-0710
Classification: Part
Weight: 0.01 lbs.
Also Known As: Motor Brush
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Milwaukee
5192 (SER 669-33651) Grinder
5192 (SER 669A) Grinder
5192 (SER 669B) Grinder
5192 (SER 669C) Grinder
5192 (SER 669D) Grinder
6140 (SER 762-1001) Grinder
6140 (SER 762-116163) Grinder
6140 (SER 762-197163) Grinder
6140 (SER 762-225408) Grinder
6140 (SER 762A) 4-1/2 Inch Sander-Grinder
6140 (SER 762A) 4-1/2 Inch Sander-Grinder
6140 (SER 762B) 4-1/2 Inch Sander-Grinder
6140 (SER 762B) 4-1/2 Inch Sander-Grinder
6140 (SER 762C) 4-1/2 Inch Sander-Grinder
6140 (SER 762C) 4-1/2 Inch Sander-Grinder
6140 (SER 762D) 4-1/2 Inch Sander-Grinder
6140 (SER 762D) 4-1/2 Inch Sander-Grinder
6140 (SER 762E) 4-1/2 Inch Sander-Grinder
6140 (SER 762E) 4-1/2 Inch Sander-Grinder
6140 (SER 762F) 4-1/2 Inch Sander-Grinder
6140 (SER 762F) 4-1/2 Inch Sander-Grinder
6141 (SER 763A) 5 Inch DI Sander-Grinder
6141 (SER 763A) 5 Inch DI Sander-Grinder
6141 (SER 763C) 5 Inch DI Sander-Grinder
6141 (SER 763C) 5 Inch DI Sander-Grinder
6141 (SER 763E) 5 Inch DI Sander-Grinder
6141 (SER 763E) 5 Inch DI Sander-Grinder
6145 (SER 627A) Sander/Grinder
6145 (SER 627A) Sander/Grinder
6146 (SER 684-13000) Sander/Grinder
6146 (SER 684-13000) Sander/Grinder
6815 (SER 710B) Shear
6145-2 (SER 627C) Sander/Grinder
6145-2 (SER 627C) Sander/Grinder
6805 (SER 709C) Shear
6256 (SER 749-1001) Jig Saw
6256 (SER 749-1001) Jig Saw
6125 (SER 787E) Random Orbit Sander
6256 (SER 749A) Jig Saw
6256 (SER 749A) Jig Saw
6880 (SER 630C) Nibbler
6141 (SER 763-1001) Sander
6141 (SER 763-22912) Grinder
6141 (SER 763-31251) Grinder
6141 (SER 763B) 5 Inch DI Sander-Grinder
6141 (SER 763B) 5 Inch DI Sander-Grinder
6141 (SER 763D) 5 Inch DI Sander-Grinder
6141 (SER 763D) 5 Inch DI Sander-Grinder
6141 (SER 763F) 5 Inch DI Sander-Grinder
6141 (SER 763F) 5 Inch DI Sander-Grinder
6880 (SER 630-3500) Nibbler
6145 (SER 627B) Sander/Grinder
6145 (SER 627B) Sander/Grinder
6815 (SER 710-5851) Shear
6126 (SER 788-1001) Sander
6246 (SER 750-10277) Jig Saw
6246 (SER 750-10277) Jig Saw
6805 (SER 709-6700) Shear
6125 (SER 787-8310) Sander
6855 (SER 711A) Shear
6256 (SER 749B) Jig Saw
6256 (SER 749B) Jig Saw
6145 (SER 627C) Sander/Grinder
6145 (SER 627C) Sander/Grinder
6126 (SER 788-3274) Sander
6125 (SER 787-1001) 5 in. Random Orbit Sander, 5.5 Amp, 10,000 OPM
6125 (SER 787A) 5 in. Random Orbit Sander, 5.5 Amp, 10,000 OPM
6125 (SER 787B) 5 in. Random Orbit Sander, 5.5 Amp, 10,000 OPM
6125 (SER 787C) 5 in. Random Orbit Sander, 5.5 Amp, 10,000 OPM
6125 (SER 787D) 5 in. Random Orbit Sander, 5.5 Amp, 10,000 OPM
6125 (SER 787F) 5 in. Random Orbit Sander, 5.5 Amp, 10,000 OPM
6145 (SER 627-133000) 4-1/2 in. Sander/Grinder
6145 (SER 627-133000) 4-1/2 in. Sander/Grinder
6145 (SER 627-254500) 4-1/2 in. Sander/Grinder
6145 (SER 627-254500) 4-1/2 in. Sander/Grinder
6145 (SER 627-385789) 4-1/2 in. Sander/Grinder
6145 (SER 627-385789) 4-1/2 in. Sander/Grinder
6145 (SER 627-411585) 4-1/2 in. Sander/Grinder
6145 (SER 627-411585) 4-1/2 in. Sander/Grinder
6145 (SER 627-418057) 4-1/2 in. Sander/Grinder
6145 (SER 627-418057) 4-1/2 in. Sander/Grinder
6145 (SER 627D) 4-1/2 in. Sander/Grinder
6145 (SER 627D) 4-1/2 in. Sander/Grinder
6145 (SER 627E) 4-1/2 in. Sander/Grinder
6145 (SER 627E) 4-1/2 in. Sander/Grinder
6145 (SER 627F) 4-1/2 in. Sander/Grinder
6145 (SER 627F) 4-1/2 in. Sander/Grinder
6805 (SER 709-1001) 16 Gauge Shear
6805 (SER 709-7151) 16 Gauge Shear
6805 (SER 709A) 16 Gauge Shear
6805 (SER 709B) 16 Gauge Shear
6815 (SER 710-1001) 14 Gauge Shear
6815 (SER 710-5450) 14 Gauge Shear
6815 (SER 710A) 14 Gauge Shear
6815 (SER 710C) 14 Gauge Shear
6880 (SER 630-1001) 10 Gauge Nibbler
6880 (SER 630A) 10 Gauge Nibbler
6880 (SER 630B) 10 Gauge Nibbler
6890 (SER 734-1001) 16 Gauge Nibbler
6890 (SER 734-12081) 16 Gauge Nibbler
6890 (SER 734B) 16 Gauge Nibbler
6126 (SER 788B) Random Orbit Sander
6126 (SER 788C) Random Orbit Sander
6126 (SER 788D) Random Orbit Sander
6126 (SER 788E) Orbit Sander
6245 (SER 685-23501) Jig Saw
6245 (SER 685-23501) Jig Saw
6246 (SER 750-1001) Top Knob Jig Saw
6246 (SER 750-1001) Top Knob Jig Saw
6246 (SER 750-6501) Top Knob Jig Saw
6246 (SER 750-6501) Top Knob Jig Saw
6246 (SER 750A) Top Knob Jig Saw
6246 (SER 750A) Top Knob Jig Saw
6256 (SER 749-25501) Variable Speed Jig Saw
6256 (SER 749-25501) Variable Speed Jig Saw
5192 (SER 699-33651) D.I. Grinder
5192 (SER 669-12000) D.I. Grinder
5192 (SER 699A) D.I. Grinder
5192 (SER 699B) D.I. Grinder
5192 (SER 699C) D.I. Grinder
5192 (SER 699D) D.I. Grinder
5192 (SER 699E) D.I. Grinder
5194 (SER 803-A) D.I. Grinder
5194 (SER 803B) D.I. Grinder
5194 (SER 803C) D.I. Grinder
5194 (SER 803D) D.I. Grinder
5194 (SER 803E) D.I. Grinder
5194 (SER 803F) D.I. Grinder
6805 (SER 709D) 16 Gauge Shear

Products Compatibility

This item works with the following types of products:

  • • Grinder
  • • Jig saw
  • • Nibbler
  • • Sander
  • • Saw
  • • Shear
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Carbon Brush - 22-18-0710
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Brushes were worn out
1. Removed the rear cover
2. Pulled one of the brush mounts loose and unplugged the lead
3. Removed the old brush from assembly
4. Installed the new brush and replaced mount
5. Repeated steps 2 thru 4 for second brush mount assembly
6. Replaced cover
7. Tested
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Cord Set - 22-64-0215
Carbon Brush - 22-18-0710
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Knife
Unscrewed the housing.
Remove the switch.
Disconnect the wires from the switch.
Remove and replace the brushes.
Put new fittings on the cord and attach to the switch.
Reposition the switch.
Reposition the housing and replace the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Left Brush Holder - 22-20-0691
Brush Spring - 23-52-0240
Right Brush Holder - 22-20-0692
Carbon Brush - 22-18-0710
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Lead was broken off one of the brushes.
1. Disassembled the grinder and removed broken parts.
2. Assembled new brushes in the holders with the new springs.
3. Installed brush and holder assembly in the grinder properly.
4. Installed handle cover and secured with screws making sure the rubber bumpers were on the brush holders properly.
5. Plugged in grinder and did test run. all was normal.
Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush - 22-18-0710
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
needed new carbon brushes and one new carbon brush spring
replaced the carbon brushes and new spring. screwed the cover back on. plugged it in and it ran like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Cord Protector - 44-76-0130
Cord Set - 22-64-0215
Carbon Brush - 22-18-0710
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, wire crimpers
brushes shot. Cord and guard missing
cussed a lot but got it done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush - 22-18-0710
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Opened the grinder, removed old brushes, cleaned all internal pieces and installed new brushes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Rubber Bumper - 42-38-0181
Carbon Brush - 22-18-0710
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Torx screwdriver
Brushes were worn and rubber bumpers were not effective.
Took it apart, replaced the worn parts and put it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush - 22-18-0710
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Torx bit
Worn brushes
Removed screws, Torx bit needed. Pulled off lower case cover. Replaced both brushes. Put back together. Works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush - 22-18-0710
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
Old brush was not properly installed.
Removed the old brushes and installed the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Brush Spring - 23-52-0240
Carbon Brush - 22-18-0710
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The original brush broke (over 25 yrs old)
Remove the motor cover
Disconnect the brushes from the holders and remove the worn springs
Install the brushes in the holders and connect them
Install the brush spring so it pushing on the back of the brushes
Replace the motor cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon Brush - ( 22-18-0710 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fixed my problem
    Perfect fit quick shipping
    Guest - May 1, 2019 Verified Purchase
    Replacement part
    Worked fine
    Guest - April 30, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy