eReplacementParts.com
866-322-9842
Shindaiwa Parts
Repair Parts Home  Lawn Equipment Parts  Shindaiwa Parts  A427000090 Cap, Spark Plug
photo thumbnailphoto thumbnail
Cap, Spark Plug
Cap, Spark Plug

Cap,​ Spark Plug

Part Number: A427000090
ShindaiwaEcho
Availability: 4 in stock
Price: $4.77
Quantity:
Order within the next 10 hours
and your part ships today!

*This part replaces obsolete part #: CAP,SPARKPLUG and 20010-72221.

Product Information
Manufacturer: Shindaiwa, Echo
Product Number: A427000090
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This replacement spark plug cap is a genuine OEM sourced component which is specially designed for use with Shindaiwa and Echo lawn and garden equipment. It is used to connect the spark plug to the ignition wire, please note this durable rubber part is sold individually. Over time the material may wear out and crack eventually requiring replacement to ensure a proper fit.
Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Chain Saw
  • • Edger
  • • Hedge Trimmer
  • • Multi-Tool
  • • Pruner
  • • Pump
  • • Saw
  • • Trimmer
Expand List
Questions & Answers

Where do I find spark plug on a lawnboy lawn mower
Juan
Hello Juan, Thank you for the question. This would depend on the model but in most cases they are on the front of the engine under the rubber spark plug boot. Thank you for your inquiry, good luck with this repair!
What is the gap on the spark plug for a 150BT?
Horace for model number 150BT Blower
Hello Horace and thanks for writing. Always refer to your manual, here is the link https://www.leafblowersdirect.com/manuals/husqvarna130btmanual_2.pdf We hope this helps. Please contact us anytime.
Repair Instructions: Submitted by Customers Like You
Bush cutter had weak compression, and, no spark
1. Remove Fuel tank Assembly (remove straps and hose)
2. Remove Carburetor from cylinder (remove screws and gaskets, clean with Carburetor cleaner)
3. Disassemble and Remove the Cylinder from the Crankcase (remove screws and gaskets)
4. Remove Muffler from the Cylinder (remove cover plate and screws)
5. Remove Piston from Crankcase (remove lock pins and bearing)
6. Remove Ignition Coil from Flywheel
Note: With the exception of the Ignition Coil and Muffler, I use carburetor cleaner to clean the cylinder and carburetor (internal/external)
7.Reverse the steps to reassemble- replacing the parts that are unserviceable with the new part(s).
Note: The gap between the ignition coil to the Flywheel is approx. one business card apart.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Plug Wrench - X602000190
Baffle, Muffler - 22135-15130
Plate, Muffler - 22135-15140
Gasket - V104001520
Lever, Lock - C460000280
Screw, Slide - V253000620
Stud, Bar Adjusting - C309000090
Cap, Spark Plug - A427000090
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
Muffler was bad, trigger lock broken, bar adjuster screw bent.
replaced parts with socket set and screwdriver
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Shindaiwa, Echo
Product Number: A427000090
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy