Muffler Cover A320000740
Part Number: A320000740
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
*This part replaces obsolete part #: 70200-15311.
Product Information
Description:
| This is an authentic Shindaiwa replacement part, sourced from the original manufacturer for use with brushcutters and trimmers. The special muffler cover is used to protect the muffler and to prevent accidental burns. This muffler cover is available as an individual replacement part, please see model diagram for associative parts. |
Compatibility
This part is compatible with the following machines:
the 15 compatible machines
Products Compatibility
This item works with the following types of products:
- • Trimmer
Repair Guides
![]()
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Questions & Answers for Muffler Cover
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
Bush cutter had weak compression, and, no spark
1. Remove Fuel tank Assembly (remove straps and hose)
2. Remove Carburetor from cylinder (remove screws and gaskets, clean with Carburetor cleaner)
3. Disassemble and Remove the Cylinder from the Crankcase (remove screws and gaskets)
4. Remove Muffler from the Cylinder (remove cover plate and screws)
5. Remove Piston from Crankcase (remove lock pins and bearing)
6. Remove Ignition Coil from Flywheel
Note: With the exception of the Ignition Coil and Muffler, I use carburetor cleaner to clean the cylinder and carburetor (internal/external)
7.Reverse the steps to reassemble- replacing the parts that are unserviceable with the new part(s).
Note: The gap between the ignition coil to the Flywheel is approx. one business card apart.
2. Remove Carburetor from cylinder (remove screws and gaskets, clean with Carburetor cleaner)
3. Disassemble and Remove the Cylinder from the Crankcase (remove screws and gaskets)
4. Remove Muffler from the Cylinder (remove cover plate and screws)
5. Remove Piston from Crankcase (remove lock pins and bearing)
6. Remove Ignition Coil from Flywheel
Note: With the exception of the Ignition Coil and Muffler, I use carburetor cleaner to clean the cylinder and carburetor (internal/external)
7.Reverse the steps to reassemble- replacing the parts that are unserviceable with the new part(s).
Note: The gap between the ignition coil to the Flywheel is approx. one business card apart.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
![]()
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
