eReplacementParts.com
877-346-4814
Shindaiwa Parts
Repair Parts Home  Lawn Equipment Parts  Shindaiwa Parts  A039000020 Breather Assembly

Breather Assembly A039000020

OEM part for: Shindaiwa

Part Number: A039000020


Install
Videos!
Breather Assembly - A039000020:Shindaiwa 360 View
Breather Assembly - A039000020:ShindaiwaBreather Assembly - A039000020:ShindaiwaBreather Assembly - A039000020:Shindaiwa 360 View
In Stock
Order within the next 6 hours and your part ships today!
Easy 15-30 minutes (4 rated repairs)?
OEM: Original Equipment Manufacturer ?
Shindaiwa
Does this d-block d-md-none fit my product?

Product Description ?

This is an original replacement part manufactured for use with Shindaiwa brushcutters, and trimmers. The breather assembly allows air in, and out of the fuel tank to relive pressure, and vacuum. This breather assembly includes the breather holder, body, valve, washer and retainer, the breather assembly is sold individually.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 36 machines

Shindaiwa

B45 Brushcutter View Diagrams & Manuals
B45INTL Brushcutter View Diagrams & Manuals
B45LA Brushcutter View Diagrams & Manuals
B450 Brushcutter View Diagrams & Manuals
C35 Brushcutter View Diagrams & Manuals
C35LA Brushcutter View Diagrams & Manuals
C350 Brushcutter View Diagrams & Manuals
RC-45 Brushcutter View Diagrams & Manuals
C-25 Brushcutter View Diagrams & Manuals
C35 (20000001-20002240) Brushcutter View Diagrams & Manuals
C35 (9014161-9099999) Brushcutter View Diagrams & Manuals
B45 (20001001-20999999) Brushcutters (B) View Diagrams & Manuals
B45 (9015011-9086510) Brushcutters (B) View Diagrams & Manuals
B450AUS (20003851-20004630) Brushcutters (B) B450 View Diagrams & Manuals
B450AUS (9023591-9093850) Brushcutters (B) B450 View Diagrams & Manuals
B450EMC (20008885-20012244) Brushcutters (B) B450 View Diagrams & Manuals
B450EMC (9016415-9098884) Brushcutters (B) B450 View Diagrams & Manuals
B45LA (20001001-20999999) Brushcutters (B) View Diagrams & Manuals
B45LA (36001001-36999999) Brushcutters (B) View Diagrams & Manuals
B45LA (9013121-9096060) Brushcutters (B) View Diagrams & Manuals
B45LA (T04820001001-T04820999999) Brushcutters (B) View Diagrams & Manuals
B45LA (C29826001001-C29826999999) Brushcutters (B)Ar View Diagrams & Manuals
C35 (20000001-20999999) Brushcutters (C) View Diagrams & Manuals
C35 (6010001-9319999) Brushcutters (C) View Diagrams & Manuals
C35 (T02020000001-T02020999999) Brushcutters (C) View Diagrams & Manuals
C35 (T23620000001-T23620999999) Brushcutters (C) View Diagrams & Manuals
C350 (20001921 - 20003190) Brushcutters (C) View Diagrams & Manuals
C350 (9010921-9011920) Brushcutters (C) View Diagrams & Manuals
C35LA (20007141-20007380) Brushcutters (C) View Diagrams & Manuals
C35LA (9015641-9017140) Brushcutters (C) View Diagrams & Manuals
C35LA (INTL)(20000001-20999999) Brushcutters (C)Intl View Diagrams & Manuals
C35LA (INTL)(6010001-9319999) Brushcutters (C)Intl View Diagrams & Manuals
C35LA (INTL)(T04720001001-T04720999999) Brushcutters (C)Intl View Diagrams & Manuals
C35LA (INTL)(T52120001001-T52120999999) Brushcutters (C)Intl View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Trimmer Parts

This part replaces obsolete part #: 20000-85500

Repair Videos ?

Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015

Customer Part Reviews ?

4
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy repair!
    Great price on exact part. Pleasantly surprised with the very fast shipping. Thanks!
    Guest - February 11, 2022 Verified Purchase
    Repair seemed to have gone well but still working on repair.
    2 points: 1- The postal charge was extremely high for this small packet. I have not tried the part out yet but it seemed to fit well into the fuel tank. 2-I am disappointed that you were not able to receive a photo of the part(s) I required. I tried sending it to you in a simple jpeg format but you were not able to receive it. This would help immensely in trying to explain the part required, Please look into this and let me know how I can send a photo to you. Thank you.
    iGlobal - November 22, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Breather Assembly


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (4 rated repairs)?

    Shindaiwa Brush Cutter 35 Gas tanks Breather Assembly replacement

    Raymond - June 19, 2016
    👍 7 of 7 people found this instruction helpful
    Tool Type

    Trimmer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    1. Remove tank from Brush Cutter by releasing rubber tank support straps with pliers. Do this by pulling rubber tabs up and outward.
    2. After accomplishing step one, and hopefully you are working on a flat surface, if you're careful you can set tank down next to power assembly without removing fuel feed line from motor.
    3. Next spray a tiny bit of WD 40 around the base of the breather assembly then twist & pull upward on it with pliers. Do not fret if it cracks as it is being replaced anyway:)
    4. After breather assembly is out remove the breather grommet by prying the edge up a bit with a flat-head screwdriver and lift it out...this may take a bit of finagling if it is old and stiff.
    5. Push in new grommet...a bit of WD 40 helps.
    6. Push in new breather assembly and that's it. Engine runs a lot better when air can replace fuel as it's being used.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    leaking gas from breather assembly.

    juan - May 9, 2019
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Trimmer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Pliers

    Breather assembly and gromer breather replacement.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bush cutter had weak compression, and, no spark

    Frankie - April 2, 2019
    1. Remove Fuel tank Assembly (remove straps and hose)
    2. Remove Carburetor from cylinder (remove screws and gaskets, clean with Carburetor cleaner)
    3. Disassemble and Remove the Cylinder from the Crankcase (remove screws and gaskets)
    4. Remove Muffler from the Cylinder (remove cover plate and screws)
    5. Remove Piston from Crankcase (remove lock pins and bearing)
    6. Remove Ignition Coil from Flywheel
    Note: With the exception of the Ignition Coil and Muffler, I use carburetor cleaner to clean the cylinder and carburetor (internal/external)
    7.Reverse the steps to reassemble- replacing the parts that are unserviceable with the new part(s).
    Note: The gap between the ignition coil to the Flywheel is approx. one business card apart.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Fuel primer, valve and breather seals were deteriorated from storage and had to be replaced.

    Dave - March 7, 2018
    Tool Type

    Trimmer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Nutdriver, Allen wrench

    Removed gas tank
    Removed and replace tank fuel pick up, breather and associated seals.
    Reinstalled fuel tank
    lubricated head on brush cutter
    Replaced cutting wheel on brush cutter
    Cleaned air filter and replaced spark plug.
    Started unit for the first time in seven years of storage.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal