866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  RotoZip Parts  2610920317 Brush Holder Assembly

Brush Holder Assembly

Part Number: 2610920317
BoschRotoZip
Availability: 24 in stock
Price: $8.38
Quantity:
Order within the next 11 hours
and your part ships today!
Description:
This is a Genuine Manufacturer Approved replacement part used on certain RotoZip Routers. This Assembly includes Plastic Holder, Two (2) Metal Holders, Two (2) Carbon Brushes, Two (2) Wire Leads, Two (2) Springs.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Product Information
Manufacturer: Bosch, RotoZip
Product Number: 2610920317
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Router
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Torx screwdriver
RotoZip tool stopped working
1. Disassembled the tool and found a broken brush spring and worn brushes.
2. Tested the switch with an ohmmeter to ensure it was OK.
3. Ordered a replacement brush holder assembly, which includes new springs and brushes.
4. Cleaned all internal parts and the inside of the case. Used zero residue contact cleaner for the commutator (cleaning took the most time as the tool was very dirty inside from years of use).
5. Installed the new brush holder assembly. It plugs into the motor like a cartridge.
6. Reassembled the tool.
7. Tested the tool-- works great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Broken brush tension spring was the culprit. Replaced the whole assembly anyways and saved the old brushes for backups, they were still in decent shape.
My Bosch Rotozip RZ20 stopped working one day, figured it was most likely the brushes.
Use a razor blad to cut the labels on the top and underside of the unit. Use the required bit in your screwdriver to remove all 6 screws and then separate the two parts of the main body. Replacing the brush assembly is easy and strait forward from this part on.
My Rotozip worked flawlessly after the replacement.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Would not run, brushes worn out
Took tool apart, replace brush holder and and put I back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Spring was broken on Brush holder assembly. Did not realize spring was broken until received the new part. The spring holds the carbon brush in place.
Opened housing and replaced the new brush holder assembly with the new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, torx 20
Brush assembly overheated, melted brush holder.
1) Removed 6 torx 20 screws.
2) Split housing cut labels along case joint.
3) Removed power connections to brush holder assembly( two white leads) needle nose.
4) Removed armature and brush assembly. (Cleaned housing and armature).
5) With flat screwdriver eased brush assembly off armature, holding brushes back in holder.
to ease over armature pivot wheel below brush assembly.
6) Eased brush assembly over pivot wheel while holding brush contacts in brush housings.
7) Pushed brush holder pins into armature, releasing brush contacts onto armature.
8) Connected power contacts back onto brush holder assembly.
9) Re-inserted armature assembly back into housing and replaced screws.
Tested operation good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Torx driver
Brush assembly damaged and variable speed control burnt out.
I removed the torx screws and split the case.I identified the damaged parts and ordered them. When they arrived I installed them as the original parts were. Then tested the tool to verify effective repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Wouldn't turn on!
Original brushes were over worn. Spring no long kept them in contact with armature. Replaced brush assembly and was back in business. Great part. Fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Torx driver
Motor would not run
Remove the six torx screws.
Separate the half's.
Disconnect the two wires from the brush assembly.
Lift the armature up and replace the brush assembly.
Make sure to seat the armature correctly in the bottom half of the case.
Reconnect wiring to brush assembly.
Reinstall cover and six screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes burned up.
Remove 6 screws and split the housing apart. Disconnected the brush assembly and reconnected the new one. Put the housing back on and installed the screws. Complete.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Holder Assembly - 2610920317
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Armature brush pressure spring broken.
1. Removed screws from housing.
2. Removed power wires from armature.
3. Removed alignment bushing from armature shaft.
4. Removed old Bush holder Bracket.
5. Installed new bracket.
6. Reassembled housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Brush Holder Assembly - ( 2610920317 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Brush Set For Rotozip RZ2

1206289

I need the brushes and the retaining wire spring that holds them in place. Can you supply?
WJA
Hello 1206289,

The part number for the RotoZip RZ2 brush is 2610920317 Brush Holder Assembly. It includes the brushes, brush leads, and brush springs.

-WJA
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • My Rotozip tool went from dead to alive in five minutes.
    My Totozip tool was totally not working. Rather than just throw it away I opened it up to see what was wrong. There are two small springs that keep the brushes in contact with the rotor. One of them had busted. I ordered a replacement part and installed it in less than five minutes. When I assembled the too it worked perfectly and it continues to do so. This was at about one fifth of the cost of a new Rotozip. Happy customer.
    Guest - April 20, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy