Watch The
Repair Video

Black Container Bottom

Part Number: 148381-000-090

14 Reviews

Date Available: Unknown

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 126450-001-090, 015132-020-090, 126450-000-090 and 015132-200-090.

Product Information

Manufacturer: Oster

Product Number: 148381-000-090

Classification: Part

Weight: 0.03 lbs.

Shipping: Ships Worldwide

Description:

This is an original Oster replacement part.
The purpose of this item is to hold the blade and seal in place at the bottom of the blender jar

Because it has plastic threads they will wear at times and the jar will leak.
Over tightening may crack this part, dropping it may break it and excessive heat may warp it.

Once you have this off, this is a good time to check the sealing ring to see if it is not cracked or if it has been compressed too much.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Oster

6791-015 12 Speed Blender
6792-027 10 Speed Glass Jar Blender
6793-027 10 Speed Blender
6672 Cube Blender
6673 Cube Blender
6674 Cube Blender
6675 Cube Blender
6676 Cube Blender
6677 Cube Blender
BPST02-B 2 Speed Blender
6864 16 Speed Blender
BPHT02-B00-026 2 Speed Blender
BRLY07-B 7 Speed Blender
6837 16 Speed Blender
6894 18 Speed Blender
6896 18 Speed Blender
BCCG08-C 8 Speed Blender
BLSTDG-B 6 Speed Blender
BRLY07-W 7 Speed Blender
BRLY07-Z 7 Speed Blender
BVCB07-L00-126 7 Speed Blender
BVLB07-L 7 Speed Blender
BCBG08-C 8-Speed Blender
BLSTCC-BFP 12-Speed Blender
BRLY07-BF 6-Cup Blender
BLSTBH-SC 500 Watt Blender
BLSTBH-SR 500 Watt Blender
BLSTMG-W Blender
6643 Cube Blender
BLSTTG-PCP-000 Party Jar Blender
006878-042 Blender
6843 Blender
BLSTSS-PZO Blender
6803 Core 14 Speed Blender
006830-000-000 10-Speed Blender
006694-015-RNP Blender
6847 Blender
6630 Cube Blender
6650 Blender
BLSTRM-DZ0-015 Blender
006845-000-NP0 Blender
6642 Cube Blender
6878 Blender
869-18 Blender
BPCT02 Blender

See more of the 91 compatible machines

Products Compatibility

This item works with the following types of products:

• Blender

Questions & Answers

Sort by

What is the part number for a replacement base for this blender? The blade is still ok but I cracked the base. Thank you!

Sandy oamek for model number 6843 Blender

Hello Sandy, thank you for inquiring. This Container Bottom part 148381-000-090 is the correct replacement for your model.

1 person found this helpful.

Did this question help you?

Need new Threaded Jar Nut to fit my Oster Blender, Model 6854 purchased in 2011.

Clayton Benner for model number 6854

Hello Clayton, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 110474-000-090. Thank you for your inquiry, good luck with this repair!

Did this question help you?

Broken black screw on container bottom. Can I use the same bottom for model 6643? I cannot find any parts on your site for 6844.

Caren for model number 6844

Hello Caren and thank you for writing. Yes, these models are very similar so this will fit your model.

Did this question help you?

This is only # on this Osterizer 7 speed blender I could find.

I need a new rubber gasket seal as mine diappeared.....would like to order a couple in case they disappear again. for model number 148381

Hello Vicente and thank you for writing. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters.

Did this question help you?

Hello, my oserizer 10 speed blender is 50 years old. Reserved as wedding gift. I cannot find a part or model number. Can you help me please.

Kay

Hello Kay and thanks for writing. Sorry, we can not find the correct part without a model number. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Once you get the information you need, we should be able to find the information on our site for you. Hope this helps. We do carry other spare parts for units such as yours, for example, Part Number: 31014904000. Good Luck with your repair.

Related Parts: Agitator Assembly

Did this question help you?

Will Oster Black Container Bottom replacement P/N/ 148381-000-090 fit a Oster model I purchased in April 1984? I am sorry I do not know the blender model number. I have this blender for 35 years and still works like a champ. My bottom is little cracked, so want to replace it.

Charu

Hello Charu and thanks for writing. We match by model numbers. So without it, we just can not be sure. It is possible that part #148381-000-090 might work with your unit, however, as we do not have your model number in our database we can not guarantee the fit. We hope this helps. Please contact us anytime. Oster 800-334-0759

Did this question help you?

Sealing ring has 2 small bumps on one side....when assembling, which side is toward the jar-bumps or flat? Manual is dated 11/64 and machine still works like a charm....

Gae Bergmann for model number Imperial VIII

Hello Gae, thank you for inquiring. Here is a link to a video showing this: https://www.youtube.com/watch?v=CMK6atU90tU&. I hope this helps!

Did this question help you?

Is this the right base for this model?

Roy for model number 6842

Hello Roy and thanks for writing. The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part.It is possible that part #148381-000-090 might work with your unit; however, as we do not have your model number in our database we can not guarantee the fit. We hope this helps. Please contact us anytime. We do carry other spare parts for units such as yours, for example, Part Number: 083422-070-000 Good Luck with your repair.

Related Parts: Sealing Ring

Did this question help you?

Repair Instructions: Submitted by Customers Like You

23 of 26 people found this instruction helpful

Tool Type:

Blender

Parts Used:

Sealing Ring - 083422-070-000

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, No tools needed.

Cracked bottom that screws onto glass container

Removed the cracked bottom from the jar, placed the blade in the container bottom, and the new seal on top of the blade. Then screwed the assembly to the bottom of the jar.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

11 of 12 people found this instruction helpful

Tool Type:

Blender

Parts Used:

Agitator Assembly - 31014904000

Sealing Ring - 083422-070-000

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, A pipe wrench to remove the base that was stuck.

Existing agitator assembly leaked.

Disassembled Container bottom and replaced all parts. I noticed that the old agitator assembly appeared to have worn bearing seals and wobbled, probably causing the leaking. I was a little worried because the replacement part numbers were off by a digit or two, but the replacement parts were the same size and fit perfectly. I reassembled and the blender no longer leaked.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

6 of 7 people found this instruction helpful

Tool Type:

Blender

Parts Used:

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Black bottom was broken

1. Took off the old bottom piece
2. Screwed on the new piece.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Blender

Parts Used:

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Cracked/broken

Screwed new base on.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 3 people found this instruction helpful

Tool Type:

Blender

Parts Used:

Agitator Assembly - 31014904000

Sealing Ring - 083422-070-000

Black Container Bottom - 148381-000-090

Cover Square - 014357-050-090

Container-Gl-5C Sq - 025843-000-000

Cap-Filler,Oster Bld Lo - 024997-010-089

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Hands!

Agitator Assembly: Worn Sleeve Bearing & Dull Blades

Manually removed container bottom, gasket and agitator assembly, then assembled new container, container bottom, gasket & agitator assembly

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 3 people found this instruction helpful

Tool Type:

Blender

Parts Used:

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Plastic Base of glass container fell on floor and broke.

Screwed the replacement base on the bottom of the container.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blender

Parts Used:

Agitator Assembly - 31014904000

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Blender leaking

Removed old assembly, screwed in new assembly

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blender

Parts Used:

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Old container bottom was cracked .

Ordered new part and replaced old part with new part.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blender

Parts Used:

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Black container bottom cracked.

No repair needed. Replacement part only.
Part was shipped promptly. Just screwed the new bottom on to the jar.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blender

Parts Used:

Agitator Assembly - 31014904000

Black Container Bottom - 148381-000-090

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

The bottom container piece cracked

Just removed old base and blade and screwed on new pieces.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

14 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Part worked perfectly.

I couldn't find my model no. so I took a chance. Worked perfectly.

Guest - 1 days ago Verified Purchase

regular mail okay

part for the blender seems to be okay

Guest - 17 days ago Verified Purchase

πerfect part

was sp glad to receive the part to replace my broken one. I use the blender a great deal, and this part was necessary to continue.

Guest - 17 days ago Verified Purchase

Black container bottom for blender

Part was exactly what I needed. Very simple process to order, and received quickly.

Guest - October 22, 2019 Verified Purchase

I received just what I needed.

The part works fine and restored my use of the blender.

Richard - October 3, 2019 Verified Purchase

Perfect fit.

Blender is now like new.

Guest - September 1, 2019 Verified Purchase

Easy fix

Easy fix. Blender works perfect again

Guest - August 26, 2019 Verified Purchase

Part was a good replacement

Part was the exact replacement for the broken one. Happy I was able to replace, had decided to purchase a new blender if I couldn't find the broken part. Saved me money!!

Guest - July 15, 2019 Verified Purchase