Agitator Assembly

Replaced the hand removable screw-on blade and seal ring on an Oster blender. One has to remove the blade and sealing gasket to clean anyway, so there were no tools involved.

Disassembled Container bottom and replaced all parts. I noticed that the old agitator assembly appeared to have worn bearing seals and wobbled, probably causing the leaking. I was a little worried because the replacement part numbers were off by a digit or two, but the replacement parts were the same size and fit perfectly. I reassembled and the blender no longer leaked.

Disassembled the base of the blender jar and replaced the old assembly with the new one. One snag: it vibrated badly at first. When I looked at the blades one was bent out too far. Straightened it with pliers and now it works fine.
The odd thing is, I remember when I got the blender I had exactly the same problem. I had to straighten one of the blades in the brand new blender.

Replaced blades and seal, which was old but not damaged. Surprised and pleased that I could find the right parts for a blender that is probably 25-30 years old.

Installed new chopper blades and seal. No more smoke. It works great.

Remove the old bottom, blades and seal
Place the new blades in the container
Put the seal on top of the blade base
Thread the assembly onto the jar

Removed the old parts and put in the new ones. Pretty basic
works perfectly and doesn't leak anymore.

Unscrewed the old agitator assy and seal. Put new agitator and seal together and put in..It works great and saves me from buying a new one. Thank You

Took out the old part and install the new one, it is very easy to do just using my hands.

Removed old assembly, screwed in new assembly