Easy
15-30 minutes
This lift pivot bearing is an OEM part from Craftsman for lawn tractors. This part connects in the middle of the link arm and the suspension arm to allow even movement when operating the lift. It is recommended to review your models diagram to verify the parts compatibility. This part is made of metal and sold individually.
Spindle Asm R.h. 532169865
OEM part for: Husqvarna, Ryobi, Craftsman, Poulan, Weed Eater, Jonsered
Part Number: 532169865
$7.46
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This Spindle Asm R.h. will fit the following 2736 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
Husqvarna
Poulan
Weed Eater
Craftsman
Jonsered
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Tractor Parts
- Lawn Mower Parts
This part replaces obsolete part #: 5321403-02, 140302, 532169839, 169839, 169865, 532140302
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spindle Asm R.h.
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Lift pivot bearing on mower deck was lost due to corner bolt loosening
Alan - April 25, 2020
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, None
Parts Used
Put bearing on lift bar screwed on bolt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Just normal wear and tear. The Tractor is 15years old
shawn - December 16, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, None
Dropped the deck replaced parts put mower deck back up
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The deck fell off
kim - July 26, 2017
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
1. Put front deck bars on mower
2. Put hangers on lawn mower
3. Lifted deck up and blocked it
4. lined it up and secure hangers
2. Put hangers on lawn mower
3. Lifted deck up and blocked it
4. lined it up and secure hangers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nut came loose.
Martin - May 14, 2017
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Replaced the pivot bearing and the nut with a socket. Easy fix!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The front axles were bent and the bearing races on one side were worn out. One of the axles had groves in them from the worn bearings.
John - May 14, 2016
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Took the caps off of the wheels and the top of the spindle assemblies. i jack up the front of the riding mower and blocked it. Removed the e-clips from each wheel. Pulled them off. Check to see what the problem was. I could that the bearing on one of the wheels was bad. That the other spindle assembly was bent and the other had been worn by the bad bearing. I removed both wheels. Pulled the e -clips off the top of the spindles assemblies and pull them out. Unhooked the tie rods from the spindle assemblies. I pulled them apart and slid them out. I separated them and removed the bad parts. I saw that the link drag was also worn and bent. I removed it from under the steering assembly. I went to the website ordered the correct parts. I found a parts list by entering the serial number from the lawn mower. The website showed me my lawn mower and a picture of all the parts. I found the parts I needed by going the the front end of the lawn mowers pictures. The parts were picture so I could tell what exact parts I needed. I ordered the parts and waited for the parts. It took 3 days for them to come very nice. I clean up the areas of the old grease and anything that needed cleaning before I reassembled the front end of the lawn mowers. I check all the parts to make sure they were correct. I reassembled the lawn mower the same way I took it apart. I reconnected the link drag first. Then I re greased the spindle assembles and slid the black in to their correct position and put the e-clips on. I then connected the link drag to the spindle assembly on the correct side. I connected the tie rod to both sides of the two spindle assemblies. I took the wheel into my shop and use a large vise to hold the wheel so that I could knock out the bad bearings. I used a punch and a hammer to knock them out. I slid the punch down into the wheel so I could find the inner side oft he bearing and tap it out. I removed all four bearing two in each wheel. I examine them and found the one that was bad. I clean out the shell removing the geese and anything else I could find. I cleaned out the area where the grease zerks were so that I could replace the bearings in the correct position. The bearings have a piece of the inner bearing where the grease zerk is supposed to go. You need to place the bearing in the correct position so that the grease zerk fits in that spot. That way the zerk won't get in the way when you put it back in and the grease zerk will work properly when you need to put grease in to the bearing in the wheel. Place the bearings back into the wheel so it is in the correct position. Take block of wood or some to pound the bearings back in. That way you won't damage the bearing. After assembling the wheels . I replaced them back on the spindles and slid the e-clips back on. I tightens ll the nuts and bolts. I regressed all the fittings. I lowered the mower and try the steering assembly out it worked great. I went and test mowed my lawn works great. John
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
