Medium
15-30 minutes
This is an original Poulan replacement part manufactured for use with pole pruners and electric chainsaws. The antispillage pad is used to prevent excess oil from escaping the oil tank. This antispillage pad is available as an individual replacement part, please see model diagram for associative parts.
Antispillage Pad 576896601
OEM part for: Poulan
Part Number: 576896601
$5.24
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 3 machines
Poulan
PLN1510 Pro Pole Pruner View Diagrams & Manuals
PLN1514 Pro Electric Chainsaw View Diagrams & Manuals
PLN1510 Pro Pole Pruner View Diagrams & Manuals
This item works with the following types of products:
- Pruner Parts
- Chain Saw Parts
- Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Antispillage Pad
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Oil tank cracked, saw blade dull
Dave - July 23, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Removed cover
Removed old oil tank
Installed new oil tank
Install new anti spillage pad
Installed new chain
Reinstalled covers
Removed old oil tank
Installed new oil tank
Install new anti spillage pad
Installed new chain
Reinstalled covers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Could not tighten chain,bar adjuster screw was bent
Jim - June 8, 2017
👍 1 of 3 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Put new kit on, cleaned up chain saw and was good to go saw down some overhanging branches over my garage
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil tank was leaking
Kenneth - September 11, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
1. Remove side cover, two screws.
2. Remove chain and bar, two 1/2" nuts.
3. Remove bar adjuster plate and old spillage pad, chain sprocket and associated bearings and gears.
4. Remove 4 screws from chain saw side body, slightly split the body to allow room to pull out the old oil tank and install he new.
5. Clean all parts and reverse for assembly.
2. Remove chain and bar, two 1/2" nuts.
3. Remove bar adjuster plate and old spillage pad, chain sprocket and associated bearings and gears.
4. Remove 4 screws from chain saw side body, slightly split the body to allow room to pull out the old oil tank and install he new.
5. Clean all parts and reverse for assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil lubricator had failed cracked and oil leaked out anti spillage pad did not exist since new
JAMES - June 26, 2018
👍 0 of 2 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
remove side cover with phillips screw driver. Used a wrench to remove the bar and chain. Removed and loosened several screws to allow the room to pull the plastic oil reservoir out after removing the oil cap. cleaned all oil wood chips and gunk from the area of the reservoir and surrounding area. reinstalled the new reservoir and reinstalled the screws removed to access the reservoir. placed the new Anti spillage pad on the tank. placed the cleaned bar and chain over the output drive gear. Replaced the hex nuts and adjuster plate while adjusting the chain tension with a standard flat blade screwdriver.. Replaced the chain cover and screws and tightened. Refilled the tank with oil and primed and lubricated the chain prior to testing for proper operation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
