eReplacementParts.com
866-322-9842
Sunbeam Parts
Repair Parts Home  Appliance Parts  Sunbeam Parts  31014104000 Agitator Assembly

Agitator Assembly

Part Number: 31014104000
OsterSunbeam
Availability: Factory Backorder [ more info ]
Price: $4.91
Quantity:
Date Available: Unknown

*This part replaces obsolete part #: 31014904000, 031014-002-000, 031014-001-000, 015126-000-000 and 031014-004-000.

Product Information
Manufacturer: Oster, Sunbeam
Product Number: 31014104000
Classification: Part
Weight: 0.09 lbs.
Shipping: Ships Worldwide
Description:
The 031014-104-000 Agitator is sold individually. The Agitator Assembly (Or Blade Assembly) is the part of the blender that chops, blends or mixes the product that is put into the blender jar. After time the blades will become dull or break or the spline that is attached to the shaft may wear out. When replacing the Agitator it is advisable to inspect the Sealing Ring, which is in between the agitator and the jar for cracks and if it has been compressed too much, which will cause it to leak from the bottom.
Compatibility

This part is compatible with the following machines:

Sunbeam
Oster

Products Compatibility

This item works with the following types of products:

  • • Blender
  • • Food Processor
Questions & Answers

Where can I order a part/blender blade (spinner) for my Osterizer, 12 speed, 6650 blender.
Chiara Gasparro for model number 6650
Hello Chiara, thank you for your inquiry! A new blender blade can be purchased directly through our site above. I hope this information helps!
Where can I find the model #
Diane
Hi Diane, Thank you for your question. The model number can be found on either a paper sticker or a metal plate. This can usually be found on the base or the bottom of the blender. I hope this helps. Thank you and have a great day!
is it for a star pin or a cubic/square shaped one
Jorge Maruri for model number oster smash/blend 14 speed blender
Hello Jorge, thank you for writing. This Agitator Assembly has a star shaped hole. If you can provide the model number for the unit you want to use it on, we can see if it is compatible or which one is.
Does one blade fit all models of Oyster Blenders?
jeaN for model number oyster 6855
Hello Jean, thank you for your inquiry! No, one blade doe snot fit all models. There blades or agitator assemblies are made to fit certain models. For your model 6855, the correct part is 031014-104-000. I hope this information helps!
Mother's wedding gift 1964. Will the replacement agitator part fit on the old? Kind of looks the same.
Nancy for model number ? Osterizer Imperial Viii
Hello Nancy and thank you for writing. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters.
There is no model number on our old Osterizer blender. It's leaking a bit now and we'd like to replace agitator and ring. It's a four blade, assembled in Mexico, 120 volts, 60 hz.
Nick
Hello Nick and thank you for writing. Sadly without the model number there is no way we could help find the correct parts as we would need to know the parts list for your model. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Once you get the information you need, we should be able to find the information on our site for you. Hope this helps
I need a new gasket or sealing rin
Karin for model number Osterizer Solid State galaxie ten
Hello Karin and thanks for writing. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters.We do carry a lot of spare parts for units similar to yours for example Part Number : 027477-001-000. Good Luck with your repair
How do I get the Oster blade that mounts onto the square pef and not the 6-point star peg?
John
Hello John and thanks for writing. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters.
I need a new chopper for a canadian made Osterizer dual range 10 model no 649-21
Elisa for model number 649 21
Hello Elisa and thanks for writing. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. We do carry a lot of other spare parts for units such as yours, for example, Part Number: 148381-000-090 Good Luck with your repair.
The upper blades on our old agitator part do not go straight up, but are angled out a bit. We were told by Oster that the agitator would fit our model 6630. The photo does look exactly like ours and the info did not mention replacement for the 6630...Please advise ir
JB for model number 6630
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 31014104000. Hope this helps!
Repair Instructions: Submitted by Customers Like You
20 of 23 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Oster blender agitator /blade was heavily worn.
Replaced the hand removable screw-on blade and seal ring on an Oster blender. One has to remove the blade and sealing gasket to clean anyway, so there were no tools involved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
14 of 16 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Sealing Ring - 083422-070-000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, A pipe wrench to remove the base that was stuck.
Existing agitator assembly leaked.
Disassembled Container bottom and replaced all parts. I noticed that the old agitator assembly appeared to have worn bearing seals and wobbled, probably causing the leaking. I was a little worried because the replacement part numbers were off by a digit or two, but the replacement parts were the same size and fit perfectly. I reassembled and the blender no longer leaked.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
10 of 11 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
The assembly was worn out. Blades dull and the drive was slipping.
Disassembled the base of the blender jar and replaced the old assembly with the new one. One snag: it vibrated badly at first. When I looked at the blades one was bent out too far. Straightened it with pliers and now it works fine.
The odd thing is, I remember when I got the blender I had exactly the same problem. I had to straighten one of the blades in the brand new blender.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Motor worked but blades didn't turn
Replaced blades and seal, which was old but not damaged. Surprised and pleased that I could find the right parts for a blender that is probably 25-30 years old.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tool needed
Leakage & smoke from chopper blades
Installed new chopper blades and seal. No more smoke. It works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Black Container Bottom - 148381-000-090
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender was leaking and blades were dull
Remove the old bottom, blades and seal
Place the new blades in the container
Put the seal on top of the blade base
Thread the assembly onto the jar
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Sealing Ring - 083422-070-000
Skirt-Assembly - 116668-001-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The blender was leaking
Removed the old parts and put in the new ones. Pretty basic
works perfectly and doesn't leak anymore.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender leaking
Removed old assembly, screwed in new assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Agitator assy. was worn and it was making a loud noise
Unscrewed the old agitator assy and seal. Put new agitator and seal together and put in..It works great and saves me from buying a new one. Thank You
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 31014104000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender agitator assembly
Took out the old part and install the new one, it is very easy to do just using my hands.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
8 Reviews
Click to filter by ratings:
5 stars
8
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Works beautifully!
    Fits my old Osterizer (40 yrs. and counting) and makes it seem like new. I was impressed by the speed in which it was delivered. Thank you.
    Guest - July 29, 2019 Verified Purchase
    New Life for My Oester Blender!
    My old agitator was stripped - the replacement is exactly the same, the service was tremendous, the part of inexpensive!
    Guest - July 18, 2019 Verified Purchase
    Agitator replacement.
    The agitator assembly works just like the original and good to know parts are available. Delivery time was slow to arrive.
    Dwight - June 21, 2019 Verified Purchase
    fits and looks the original.
    This part was for a blender that was over 50 years old. It is working perfectly.
    Lynn - June 7, 2019 Verified Purchase
    Much cheaper than buying a new blender
    This part fit perfectly, thank you.
    Guest - June 2, 2019 Verified Purchase
    easy to get older parts
    This site is a god-send for finding older parts. Came quickly and in perfect shape!
    Marge - May 29, 2019 Verified Purchase
    0sterizer agitator.
    The part worked perfectly and only cost me too a little over $11.00
    Guest - May 29, 2019 Verified Purchase
    Great part
    Fit perfectly
    Wayne - May 2, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Oster, Sunbeam
    Product Number: 31014104000
    Classification: Part
    Weight: 0.09 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Articles:
    How to Replace the Blade Assembly (Agitator) on an Oster Blender
    Step-by-step instructions for removing and installing the blade assembly (agitator) on your Oster blender....
    October 10, 2017
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy