866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Appliance Parts  Sunbeam Parts  031014-104-000 Agitator Assembly

Agitator Assembly

Part Number: 031014-104-000
OsterSunbeam

We Sell Only Genuine Parts From the Manufacturer – Guaranteed!

Availability: 25+ in stock
Price: $4.91
Quantity:
Order within the next 11 hours
and your part ships today!

*This part replaces obsolete part #: 031014-002-000, 031014-001-000, 015126-000-000 and 031014-004-000.

Description:
The 031014-104-000 Agitator is sold individually. The Agitator Assembly (Or Blade Assembly) is the part of the blender that chops, blends or mixes the product that is put into the blender jar. After time the blades will become dull or break or the spline that is attached to the shaft may wear out. When replacing the Agitator it is advisable to inspect the Sealing Ring, which is in between the agitator and the jar for cracks and if it has been compressed too much, which will cause it to leak from the bottom.
Product Information
Manufacturer: Oster, Sunbeam
Product Number: 031014-104-000
Classification: Part
Weight: 0.09 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Blade Assembly (Agitator) on an Oster Blender
Step-by-step instructions for removing and installing the blade assembly (agitator) on your Oster blender....
October 10, 2017
Related Products
Compatibility

This part is compatible with the following machines:

Sunbeam
Oster

Products Compatibility

This item works with the following types of products:

  • • Blender
  • • Food Processor
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
18 of 21 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Oster blender agitator /blade was heavily worn.
Replaced the hand removable screw-on blade and seal ring on an Oster blender. One has to remove the blade and sealing gasket to clean anyway, so there were no tools involved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
11 of 13 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, A pipe wrench to remove the base that was stuck.
Existing agitator assembly leaked.
Disassembled Container bottom and replaced all parts. I noticed that the old agitator assembly appeared to have worn bearing seals and wobbled, probably causing the leaking. I was a little worried because the replacement part numbers were off by a digit or two, but the replacement parts were the same size and fit perfectly. I reassembled and the blender no longer leaked.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 9 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
The assembly was worn out. Blades dull and the drive was slipping.
Disassembled the base of the blender jar and replaced the old assembly with the new one. One snag: it vibrated badly at first. When I looked at the blades one was bent out too far. Straightened it with pliers and now it works fine.
The odd thing is, I remember when I got the blender I had exactly the same problem. I had to straighten one of the blades in the brand new blender.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Motor worked but blades didn't turn
Replaced blades and seal, which was old but not damaged. Surprised and pleased that I could find the right parts for a blender that is probably 25-30 years old.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tool needed
Leakage & smoke from chopper blades
Installed new chopper blades and seal. No more smoke. It works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Black Container Bottom - 148381-000-090
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender was leaking and blades were dull
Remove the old bottom, blades and seal
Place the new blades in the container
Put the seal on top of the blade base
Thread the assembly onto the jar
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Skirt-Assembly - 116668-001-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The blender was leaking
Removed the old parts and put in the new ones. Pretty basic
works perfectly and doesn't leak anymore.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Agitator assy. was worn and it was making a loud noise
Unscrewed the old agitator assy and seal. Put new agitator and seal together and put in..It works great and saves me from buying a new one. Thank You
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender agitator assembly
Took out the old part and install the new one, it is very easy to do just using my hands.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender leaking
Removed old assembly, screwed in new assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Agitator Assembly - ( 031014-104-000 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Manufacturer

1315143

Is this an aftermarket manufactured part or a genuine Oster OEM part?
WJA
Hello 1315143,

The Oster part number, 031014-104-000 Agitator Assembly is assured to be an Oster OEM replacement part.

-WJA
Question: Agitator Female Part

1267934

Can you describe the shape of the female part? The male part on the blender I have is square.
The female part looks like an 8 pointed star and will work with your blender.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy