*This part replaces obsolete part #: 753-05261.
Product Information
Description:
This is a genuine Troy-Bilt replacement part that is specially designed for handheld trimmers and edgers. It includes the plastic pulley and the rope of the starter assembly that allows user to pull start the equipment. Please note the hardware to attach this assembly, the housing and other components are all sold separately. |
Compatibility
the 27 compatible machines
This part is compatible with the following machines:
Troy-Bilt
25A-515-966 (TBE515) (2007) Edger
TB514CS (41ADT51G966) Gas Trimmer
TB525CS (41ADT52C711) Gas Trimmer
TB525CS (41BDT52C966) Gas Trimmer
TB525CS (Horse)(41ADT52C966) Gas Trimmer
TB525ET (41ADT5EC966) Gas Trimmer
TB575SS (41ADT57C711) Gas Trimmer
TB575SS (Big Red)(41ADT57C966) Gas Trimmer
TB590BC (41ADT59C711) Gas Trimmer
TB590BC (41ADT59C966) Gas Trimmer
TB514CS (41ADT51G966) Gas Trimmer
TB525CS (41ADT52C711) Gas Trimmer
TB525CS (41BDT52C966) Gas Trimmer
TB525CS (Horse)(41ADT52C966) Gas Trimmer
TB525ET (41ADT5EC966) Gas Trimmer
TB575SS (41ADT57C711) Gas Trimmer
TB575SS (Big Red)(41ADT57C966) Gas Trimmer
TB590BC (41ADT59C711) Gas Trimmer
TB590BC (41ADT59C966) Gas Trimmer
TB575SS (41BDT57C966) Trimmer
TB539E Trimmer
TB514ES (41BDT51G966) Trimmer
TB525CS (41ADT52C966) Horse
TB525ES (41CDT52C966) Trimmer
TB575ES (41CDT57C966) Trimmer
TB575SS (41ADT57C966) Big Red
41ADT52C966 (TB525CS) Horse Horse Handheld Gas Trimmer
41ADT57C966 (TB575SS) Big Red Big Red Handheld Gas Trimmer
TB539E Trimmer
TB514ES (41BDT51G966) Trimmer
TB525CS (41ADT52C966) Horse
TB525ES (41CDT52C966) Trimmer
TB575ES (41CDT57C966) Trimmer
TB575SS (41ADT57C966) Big Red
41ADT52C966 (TB525CS) Horse Horse Handheld Gas Trimmer
41ADT57C966 (TB575SS) Big Red Big Red Handheld Gas Trimmer
Cub Cadet
Products Compatibility
This item works with the following types of products:
- • Edger
- • Trimmer
Questions & Answers for Starter Asm 14spr
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
7 of 7 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set
Trimmer pull starter "cam' worn out
Trimmer engine unit had to be taken off of shaft assembly]
Clutch & housing removed
pull starter assembly replaced
Visit to "U-tube" (love 'em) gave me the information I needed - would have been horrible experience without it
Clutch & housing removed
pull starter assembly replaced
Visit to "U-tube" (love 'em) gave me the information I needed - would have been horrible experience without it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 5 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Nutdriver
Cogs wouldn't engage to turn engine when starter rope pulled
The rope and pulley were one piece and the cogs were another piece. If I had just replaced the cogs piece, I could have avoided dealing with the rope pulley spring. I wound the rope around the pulley, but excess rope that won't retract was an issue. I threaded a piece of string around the pulley, tied the end of the starter rope to the string and pulled the starter rope around the pulley one last time to get the tension needed for the rope to fully retract after the start pull.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information