Easy
15-30 minutes
This SRM Echomatic head, commonly referred to as a bump head, is situated beneath the debris shield at the end of the drive shaft assembly in your trimmer. This type of cutting head features a convenient bump-to-advance line feeding system. By gently tapping it against the ground during operation, the line automatically advances without manual adjustments. The head can hold up to 20 feet of .095-inch line and can handle a maximum line diameter of .105 inches. If you observe that the line is not advancing, there is irregular feeding, or you notice visible wear, it has to be replaced. Start by inserting the locking tool into the hole on the drive shaft. Turn the cutter head clockwise to unthread it until you can detach it. Align the hole in the adapter plate of the new cutting head with the hole in the shaft. Install the locking tool and turn it counterclockwise until it is securely in place, then remove the locking tool. Keep in mind that this genuine OEM replacement part comes with all the required hardware for your repair.
Srm Echomatic Head 21560070
OEM part for: Echo
Part Number: 21560070
Order within the next 12 hours and your part ships today! 
Compatibility
This part will fit the following 27 machines
Echo
This item works with the following types of products:
- Trimmer Parts
This part replaces obsolete part #: 200095200, 21560050
Repair Videos ?
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Srm Echomatic Head
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replaced trimmer head.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Head wornout
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Small philips for a back up tool
Parts Used
Trim line would keep pulling inward instead of out.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Echo trimmer
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Power Drill, Socket set, None
Parts Used
String spool wore out after 20 years of use.
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Adjustable Wrench
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
