Easy
Less than 15 minutes
This authentic item is supplied by the original equipment manufacturer for use with Ryobi band saws. It is an identical replacement for a missing or a faulty guide block that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality guide block is made of durable metal and is sold individually.
Guide Block (upper) 089120406052
OEM part for: Ryobi
Part Number: 089120406052
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Ryobi
BS904 Band Saw View Diagrams & Manuals
BS904G 9-Inch Band Saw View Diagrams & Manuals
This item works with the following types of products:
- Band Saw Parts
- Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Guide Block (upper)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
When tighening the Allen screw the Guide Block broke at the threaded whole.
Roberto - January 22, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
1. Remove the blade.
2. Unscrew the metric screw with the provided metric wrench with the Band Saw.
3. Remove the broken Guide Block and push out the broken piece with a small screw driver.
4. Install the replacement Guide Block.
5. Insert screw and tighten with metric wrench. Do not over tighten metric screw.
6. Align pins accordingly so the blade is centered between the two pins (1/32" to 1/16" each side).
7. Reinstall Blade and center onto tires and recalibrate if needed.
2. Unscrew the metric screw with the provided metric wrench with the Band Saw.
3. Remove the broken Guide Block and push out the broken piece with a small screw driver.
4. Install the replacement Guide Block.
5. Insert screw and tighten with metric wrench. Do not over tighten metric screw.
6. Align pins accordingly so the blade is centered between the two pins (1/32" to 1/16" each side).
7. Reinstall Blade and center onto tires and recalibrate if needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle broke off lock screw/guide block broke at screw
JANET - February 22, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Removed existing lock screw, replaced it with new one. Done.
Inserted new guide block, put in screw, tightened and adjusted. Done.
Have not replaced tires yet. Cleaned existing ones and they seem to be fine for now. I really just wanted to have them on hand for when I did need to replace them.
Inserted new guide block, put in screw, tightened and adjusted. Done.
Have not replaced tires yet. Cleaned existing ones and they seem to be fine for now. I really just wanted to have them on hand for when I did need to replace them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Band saw guide broke when screw was overtightend
Russ - November 10, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Replaced guide with one screw. Very straight forward.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The guide block broke where the mounting screw attached it to the machine
Bryan - December 22, 2023
Tool Type
Band Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Removed the defective part and removed the two guides put them into the new guide mount and put the Mount back in the machine screwed it in place adjusted the two guides and that was it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade guide broken
James - June 4, 2021
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Very well
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Guide block and pins were worn out
PAUL - May 9, 2019
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Removed block, replaced with new block and pins. Realigned block to blade clearance.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I over tightened the upper guide so it broke in half.
Sammy - December 5, 2015
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Simple don't over tighten the black screw on the side. Once snug leave it alone.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
