Medium
1-2 hours
This item has been OEM sourced to ensure a high-quality standard. The gasket is an authentic Kawasaki part that is intended to be used with 4 stroke engines. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. This gasket is sold as a single item.
Air Cleaner Gasket 11061-7018
OEM part for: Kawasaki, Toro
Part Number: 11061-7018
$3.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Air Cleaner Gasket will fit the following 1235 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Kawasaki
Toro
30033 (280000001-280999999) Commercial Walk-behind Traction Unit, 17hp Pistol-grip Hydro Drive, 2008
30033 (290000001-290999999) Commercial Walk-behind Traction Unit, 17hp Pistol-grip Hydro Drive, 2009
30033 (310000001-310999999) Commercial Walk-behind Traction Unit, 17hp Pistol-grip Hydro Drive, 2010
Show More Compatible Models
This item works with the following types of products:
- Engine Parts
- Lawn Tractor Parts
- Lawn Mower Parts
This part replaces obsolete part #: 11060-7004, 11061-7005
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Air Cleaner Gasket
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Carb cleaning and complete gasket replace
Heath - December 12, 2018
Tool Type
Engine
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Did you find this story helpful?
Thanks for voting and helping fellow customers!
DR Tall Grass & Brush Mower with 17 hp Kawasaki engine was leaking gas.
Terral - July 13, 2018
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
1. Removed air cleaner and hood assembly to get to carburetor.
2. Removed carburetor to find 2 gaskets needing replacement and carb bolts weren't tight.
3. Replaced 2 carb gaskets, tightened carb bolts properly and reassembled air cleaner & hood.
2. Removed carburetor to find 2 gaskets needing replacement and carb bolts weren't tight.
3. Replaced 2 carb gaskets, tightened carb bolts properly and reassembled air cleaner & hood.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor needed rebuilding
Jack - May 21, 2017
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Removed carb from machine, took carb all apart, soaked carb in a solution overnight. Then I took it out and washed it then blew it out with air compressor, then put it all back together. Put it back on, machine ran perfect
Did you find this story helpful?
Thanks for voting and helping fellow customers!
There was a loss of compression due to exhaust seeping past the cylinder head and engine block
Johnny - April 13, 2017
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set
Replaced all of the gaskets noted above
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine had low compression No Power and Running on one Cylinder
Rocklan - June 13, 2016
Tool Type
Engine
Difficulty
Expert
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Inch lb.Torque Wrench, Feeler gage Set
I purchased this Lawn Tractor as a basket case, the owner had taken the engine apart and didn't know what he was doing. I inspected the major engine components and made the decision to use new gaskets and replace the push rods that he bent taking the head off the engine. My diagnosis was the intake and exhaust valves were out of adjustment and one head gasket was starting to leak. The engine did have 555 hrs. on it but the short block and cylinders were of normal wear for the hours on the engine. Inspected the heads and the valves and seats, cleaned and lapped the valves just because I was there. Installed all components, Engine restarted with no problems after 10 hours I will be checking the valve adjustment again and change the oil and filter again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
