Easy
15-30 minutes
This air filter is an original Lawn Boy replacement part, it is not an aftermarket imitation. The foam filter is used to stop debris from entering the engine, and allow clean air in. Air filters can clog or tear, and dirt inside an engine can damage vital components. It is recommended to replace damaged or blocked air filters, this filter is sold individually.
Filter-air 107-4622
OEM part for: Lawn Boy
Part Number: 107-4622
$8.71
In Stock
Order within the next 8 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Filter-air will fit the following 80 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Lawn Boy
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Mower Parts
This part replaces obsolete part #: 95-5574
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Filter-air
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Carburetor problems
Melvin - June 5, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Remove the air filter cover and the old air filter and throw the old air filter away. Remove the fuel lines and throttle from the carburetor. Remove the two screws holding the carburetor. Remove the old carburetor and use it as a model to build the new carburetor. The only way you can get a new carburetor is with this kit. Install the new one with the two screws. Replace the throttle and fuel lines. Install the new air filter, then the air filter cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Back wheels were worn out. 23 years old. New mulch and regular bkade. New air filter. All from normal wear and tear.
Norm - May 30, 2019
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, 2x4 for blade replacement
Removed bolt on wheel and replaced with new wheel. Replaced filter. Replaced mulch and regular blade with ratchet and socket. Used 2 x 4 to lock blade while it was loosened.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air filter cover and filter were missing.
Mike - May 16, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Put the filter in, connected the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
16 year old Lawn Boy needed a tune-up.
Terry - May 5, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Parts Used
1. Removed old spark plug from mower.
2. Set new spark plug gap to .030 and installed it in mower.
3. Put 1 tablespoon of 30 weight motor oil onto new air filter.
4. Worked motor oil into filter by hand spreading it out evenly.
5. Blotted out excess motor oil from filter with a paper towel.
6. Cleaned mower air filter housing of old oil and yard debris.
7. Installed new air filter.
8. Mower starts now with ease and runs great!
2. Set new spark plug gap to .030 and installed it in mower.
3. Put 1 tablespoon of 30 weight motor oil onto new air filter.
4. Worked motor oil into filter by hand spreading it out evenly.
5. Blotted out excess motor oil from filter with a paper towel.
6. Cleaned mower air filter housing of old oil and yard debris.
7. Installed new air filter.
8. Mower starts now with ease and runs great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed primer bulb on my lawn boy mower and it was time
WAYNE - January 13, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Feeler gauge to check spark plug gap
Removed three screws took off the shroud and carefully removed primer line popped out primer base then put in new base and primer bulb then replaced primer line put the shroud back on with the three screws. Then took a screwdriver and popped the clip off air cleaner cover and replaced air cleaner and cover. Removed spark plug wire removed plug and replaced with a new plug. Then replaced blade before attaching spark plug wire.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
