Easy
15-30 minutes
This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
- Length: 8'
- Gauge: 16
- Wires: 2
- Type: Eyelets
Cord 330081-08
OEM part for: DeWALT, Porter Cable, Black and Decker
Part Number: 330081-08
$17.87
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.53 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 21 machines
DeWALT
DW297 Type 1 3/4 Impact Wrench View Diagrams & Manuals
DW744S Type 2 Jobsite Table Saw View Diagrams & Manuals
DW307M Type 2 9.5 AMP Reciprocating Saw View Diagrams & Manuals
DW309 Type 3 Recip Saw View Diagrams & Manuals
DW744 Type 1 Jobsite Table Saw View Diagrams & Manuals
DW744 Type 2 Jobsite Table Saw View Diagrams & Manuals
DW311 Type 1 Reciprocating Saw View Diagrams & Manuals
DW310 Type 1 Reciprocating Saw View Diagrams & Manuals
DWD220 Type 1 1/2 Drill View Diagrams & Manuals
DW849 (Type 3) 7-9 Electronic Polisher View Diagrams & Manuals
DW307MK (Type 2) Recip Saw View Diagrams & Manuals
DW309K (Type 3) Dewalt Recip Saw View Diagrams & Manuals
DW310K (Type 1) 11a Keyless Recip Saw Kit View Diagrams & Manuals
DW310K (Type 2) 11a Keyless Recip Saw Kit View Diagrams & Manuals
DW311K V (Type 1) Dw311k Recip Saw W/10 Ext View Diagrams & Manuals
DW311K (Type 1) 12a Keyless Recip Saw Kit Power Tool View Diagrams & Manuals
DWD220 (Type 2) 1/2 Drill Power Tool View Diagrams & Manuals
Porter Cable
9748 Variable-Speed Dual Action Quik-Change Tiger Saw View Diagrams & Manuals
9748 (Type 1) Core Drill Power Tool View Diagrams & Manuals
9748 (Type 2) Core Drill Power Tool View Diagrams & Manuals
Black and Decker
9748 Type 1 Tiger Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Impact Wrench Parts
- Saw Parts
- Table Saw Parts
- Reciprocating Saw Parts
- Drill Parts
- Polisher Parts
This part replaces obsolete part #: 330081-04
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Cord was cracked in numerous places. For safety replaced entire power cord
Mark - February 2, 2022
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Female Spade Wire Ends
Parts Used
Disassembled power switch. Removed old cord. Put new female spade connectors on new cord. Installed cord and fastened power switch together and tested saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Electrical cord frayed.
MICHAEL - July 8, 2021
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Crimping tool
Parts Used
Sat table saw on its side. Removed cord from its holder. Unplugged female and male ends. Crimped New female ends onto New electrical cord. Plugged female and male ends together. Replaced cord holder.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
rear bearing on motor bad
Tom - November 27, 2020
Tool Type
Table Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Power Drill, torx set.
disassemble saw and lift mechanism
disassemble motor, cord, start switch
reverse order to assemble.
disassemble motor, cord, start switch
reverse order to assemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Plug had cracks in the insulator
Dan - April 2, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx driver
Parts Used
Placed table saw on work bench on its side, easier access to switch housing. Removed torx head screws (4). Took a picture of the connections of the back of the switch. This was a reference for the way the cord plugged in to the back of the switch. Unplugged the old cord from switch. Then had to run to the hardware store to purchase new female16-14 insulated spade connectors. Crimped the new connectors on the new power cord. Routed the new cord through the table saw, same as the old one was. Reinstalled the switch housing to the table saw. Placed table saw on floor. Plugged it in and turned it on/ off.
👍👍
👍👍
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original cord was damaged
LeRoy - March 25, 2019
Tool Type
Table Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Put a new cord on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn and cracked power cord.
Gary - June 21, 2017
Tool Type
Table Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Crimping tool
Parts Used
Had to remove the power switch and crimp on the new connectors. Turned the table saw upside down to make it easier for the alignment of the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Electrical cord rotted from age
Valoris - March 31, 2017
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
1) Removed blade as time to replace, set new throat plate into place and adjusted for slide height to table.
2) Removed electrical box (two screws) from under table saw
3) Disconnected quick connects.
4) Prepared new cord with female terminal connectors.
5) Plugged cord in, refit cord / box and tightened attachment screws.
2) Removed electrical box (two screws) from under table saw
3) Disconnected quick connects.
4) Prepared new cord with female terminal connectors.
5) Plugged cord in, refit cord / box and tightened attachment screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad cord
Greg - February 15, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx head screwdriver
Parts Used
Very simple. Remove torx screws and handle cover, make note of correct wire connections and remove old cord w/sm. screwdriver to release push lock connections. Remove cord protector off old cord and slide on new cord. Push in new wire connections making sure they go back to correct position. Reinstall handle cover.. Ready to go...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
