Easy
Less than 15 minutes
This is a Genuine Manufacturer Approved replacement part used on some Dremel Rotary Multi-Tools. This part provides the firm grip for holding a bit in a tool. This Collet is for using bits with 1/8" arbors. Due to prolonged, heavy use a collet may need to be replaced. Collet Nut is sold separately.
Collet 2615110480
OEM part for: Dremel, Bosch
Part Number: 2615110480
$3.99
Factory Backorder
Date Available: Unknown 
Jump To:
Frequently Purchased Together ?
Compatibility
This Collet will fit the following 37 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Dremel
Show More Compatible ModelsThis item works with the following types of products:
- Multi-Tool Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
I can always get parts to make repairs.
Dremel self repair
Guest -
March 16, 2023
Verified Purchase
Great Company to work with.
All my parts were correct, and the repair went well. The time frame in which I received them, was what they quoted. Thank You.
Guest -
December 10, 2022
Verified Purchase
Exact
It was exactly what I needed
ronald -
July 12, 2021
Verified Purchase
fabulous
All my orders arrived as expected...thank you so much for a good customers service.
roland -
May 21, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Collet
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
missing pieces
Shawn - April 12, 2020
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none
Parts Used
installed missing collet and nut
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Collet lock broke. Couldn't get bits in and out.
Allen - August 17, 2018
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Popped the 4 screws out and took the two housing halves apart.
2. Pulled the main mechanism out.
3. Unscrewed the collet and lock nut out, replaced, and put it all back together.
2. Pulled the main mechanism out.
3. Unscrewed the collet and lock nut out, replaced, and put it all back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The collet broke and accessories could not be attached
Ricardo - May 14, 2018
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed the cap from the tool.
Removed the collet from the tool.
Installed new collet and cap.
Installed an accessory and tightened with wrench.
Plugged in tool and verified operations
Removed the collet from the tool.
Installed new collet and cap.
Installed an accessory and tightened with wrench.
Plugged in tool and verified operations
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Collet jammed in collet nut
Jack - October 5, 2017
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench
Parts Used
Installed new parts. Discarded old parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No response from switch
Theodore - May 13, 2017
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Torx driver
Remove the screws from the housing
Remove the brush caps, then the brush springs and brushes
Remove the collet nut
Remove the front collar
Remove the top housing
Remove the wires from the old switch and remove the switch
Install the new switch and the wires
Screw the housings together
Install the brushes and springs, then the caps
Remove the brush caps, then the brush springs and brushes
Remove the collet nut
Remove the front collar
Remove the top housing
Remove the wires from the old switch and remove the switch
Install the new switch and the wires
Screw the housings together
Install the brushes and springs, then the caps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My Dremel Moto tool is old and one of the ears on the collet broke off. Also the collet nut was binding a little
Daniel - December 30, 2016
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
1. Remove the collet nut and collet.
2. Installed the new collet and threaded on a new collet nut.
Good as new!
2. Installed the new collet and threaded on a new collet nut.
Good as new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
