Easy
15-30 minutes
This part is supplied by Bissell. This Base Window can be found on many models of Bissell carpet cleaners. This part is made of plastic and includes the Window Seal (part number B-010-4052). The Base Window is used as a nozzle to suck up the dirty water from carpet. Suction can be lost when this part has only cracked or when the Gasket (B-210-34180) doesn’t make a good seal. The Window is attached with Philips Head screws. Take care not to over tighten screws when installing.
Base Window B-014-9863
OEM part for: Bissell
Part Number: B-014-9863
$17.50
In Stock
Order within the next 7 hours and your part ships today! 
Compatibility
This part will fit the following 31 machines
Bissell
1699 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1699-1 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1699-5 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1699-8 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1699-A Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1699-B Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1699-F Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1699-P Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
7901 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
7920 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
8905 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
8910 Proheat Clearview Powersteamer Carpet Cleaner View Diagrams & Manuals
1685 Upright Deep Cleaner View Diagrams & Manuals
1692 Upright Deep Cleaner View Diagrams & Manuals
1697 Upright Proheat Powersteamer Deep Cleaner View Diagrams & Manuals
1698 Upright Proheat Powersteamer Deep Cleaner View Diagrams & Manuals
1698-1 Upright Proheat Powersteamer Deep Cleaner View Diagrams & Manuals
7950 ProHeat Self Propelled Upright Deep Cleaner View Diagrams & Manuals
7901-1 Proheat Clearview Powersteamer View Diagrams & Manuals
1693 Upright Deep Cleaner View Diagrams & Manuals
1694V Upright Deep Cleaner View Diagrams & Manuals
1694W Upright Deep Cleaner View Diagrams & Manuals
1699-N Proheat Upright Extractor View Diagrams & Manuals
7950-Y Deep Cleaner ProHeat Self Propelled View Diagrams & Manuals
8804 Power Steamer Pro Deluxe View Diagrams & Manuals
8804M Power Steamer Pro Deluxe View Diagrams & Manuals
8804T Power Steamer Turbo View Diagrams & Manuals
8805 Upright Deep Cleaner View Diagrams & Manuals
8806 Upright Deep Cleaner View Diagrams & Manuals
8806-1 Upright Deep Cleaner View Diagrams & Manuals
8904 Power Steamer Pro Deluxe View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Vacuum Parts
This part replaces obsolete part #: B-214-9872, B-214-9871, 2149871
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Base Window
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Corner of window broken off.
Tom - May 15, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed 2 screws. Removed old window. Cleaned area underneath and replaced old with new. Reinserted and tightened screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Was not sucking all the water up.
John - March 22, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed 2 screws popped off old shield and put in new. Had to reseal gasket.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
replace lost parts repair broken window
Timothy - February 15, 2019
Tool Type
Vacuum
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, none
replace lost parts replace broken window
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken cover on steamcleaner
Mary - October 20, 2017
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
When the parts came in just removed the screws and replaced the old cover and it's like new again. Until I found this sight thought I was going to have to buy a new steam cleaner or keep tapping it together. Thanks for being here.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Scrubber and Vacuum window broken in fall
Vince - July 21, 2017
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed old scrubber with screw driver left and right phillips head screws
Installed new one same way.
Removed broken front vac window two phillips screws left and right
Install new one in reverse. Just make sure upper rubber gasket fits correctly into vac body.
Installed new one same way.
Removed broken front vac window two phillips screws left and right
Install new one in reverse. Just make sure upper rubber gasket fits correctly into vac body.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The nozzle corner broke off.
Tim - June 1, 2017
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Took the broken part off using a screwdriver only and it took all maybe 5 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Left side of cleaner top would not come all the way down
Cecil - April 6, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, None
No problems installing new parts, went well. Only problem I had was with one of the hoses being on the wrong side of the water outlet, could not get left side to come all the way down. Corrected this problem the top went into place easily. Make sure this hose is on the inside if the water drain in bottom of sweeper tank area.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
