Ball 696631-00 - OEM DeWALT - eReplacementParts.com
eReplacementParts.com
877-346-4815
DeWALT Parts

Ball 696631-00

OEM part for: DeWALT, Black and Decker

Part Number: 696631-00


Install
Videos!
Grid squares measure 1x1 inch
Ball - 696631-00:DeWALTBall - 696631-00:DeWALT
Factory Backorder
Date Available: Unknown
Easy 15-30 minutes (4 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALTBlack and Decker
Does this fit my product?

Product Description ?

Genuine Dewalt replacement part, this item is sold individually.
The 696631-00 Steel Ball is part of the chuck assembly of the Impact Drivers shown below.
When you pull back the sleeve of the chuck assembly and insert your bit, the Steel Ball is the part that locks the bit in the chuck assembly.

In the Screw Drivers listed below this is the part that secures the Bit Holder in the spindle.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Ball will fit the following 217 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

DeWALT

Black and Decker

Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Cordless Drill Parts
  • Drill Parts
  • Impact Driver Parts
  • Screwdriver Parts
  • Impact Wrench Parts

Repair Videos ?

Watch the Repair Video for Ball

Customer Part Reviews ?

5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Always a pleasure
    Very good service & always find the parts we need
    Guest - April 13, 2022 Verified Purchase
    worked as expected
    It arrived on time drywall driver works like a champ now
    Guest - September 3, 2020 Verified Purchase
    Exactly as described
    Quick shipment
    Guest - August 6, 2019 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Ball


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (4 rated repairs)?

    Anvil worn out after 15 years of use.

    Steven - December 30, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Impact Driver

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Awl number 10 star drive screwdriver

    Watched the video on your site extremely helpful. Must have a thin shaft #10 star drive screwdriver to remove 2 screws in handle GRRR. Remove all the screws in handle. Carefully set light in side of handle that has trigger. Pop keeper ring off front of anvil remove sleeve, washer and spring. Note which direction the sleeve goes back on. Careful if you plan to reuse ball bearing as it can drop out.
    Remove anvil housing from drill and remove anvil. Suggest having lithium grease available if needed.
    Putting the keeper ring on was the hardest part very tight fit.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Ruined anvil during use.

    Raymond - April 6, 2019
    Tool Type

    Impact Driver

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Removed anvil. Installed new anvil, ball and retaining ring.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Had stuck bit when removed ball, spring, and washer came out and lost

    Gary - December 11, 2018
    Tool Type

    Impact Driver

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Eye glass repair tool kit. Smallest screwdriver and screwdri

    Remove old retaining clip with pair of ring pliers or screwdriver with hook on end. Put back in bit shaft the ball, spring, flat washer. Replace retaining ring with ring pliers or push down with 2 small screwdrivers.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    I was driving masonry screws and the bit holder got hot and seized up, and I had trouble removing bits

    Bobby - January 25, 2016
    👍 1 of 2 people found this instruction helpful
    Tool Type

    Impact Driver

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver

    Remove keep ring and remove washer spring sleeve and ball bearing and replace with new parts now it works like new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal