Socket Head Screw 06-75-3150 - OEM Milwaukee - eReplacementParts.com
eReplacementParts.com
877-346-4815
Milwaukee Parts
Repair Parts Home
  
Power Tool Parts
  
Milwaukee Parts
  06-75-3150 Socket Head Screw

Socket Head Screw 06-75-3150

OEM part for: Milwaukee

Part Number: 06-75-3150


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Ships within 1 business day
Easy 15-30 minutes (17 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this fit my product?

Product Description ?

This is a genuine Milwaukee replacement part, it is sold individually.
The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below.
This is a left hand threaded screw, to remove it turn it clockwise.

We do have an article and video on

  • Size: 1/4-20 X 1
  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Socket Head Screw will fit the following 325 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Milwaukee

Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Drill Parts
  • Electric Drill Parts
  • Hammer Drill Parts
  • Cordless Drill Parts
  • Drill Press Parts
  • Engine Parts
  • Radio Parts

Repair Videos ?

Watch the Repair Video for Socket Head Screw

Customer Part Reviews ?

5
Average Rating (out of 5):
14 Reviews
Click to filter by ratings:
5 stars
14
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Left Handed Thread.
    Just Right...Thank You.
    Guest - October 15, 2023 Verified Purchase
    Two thumbs up
    Perfect
    Guest - September 26, 2023 Verified Purchase
    Easy repaired, great part
    The was in the great condition
    Vladimir - July 8, 2023 Verified Purchase
    Socket Head Screw.
    Was small order, but really appreciate the effort put into it. Thank you,
    Guest - June 15, 2023 Verified Purchase
    Great service right on time .
    The chain saw that I order was delivered on time.
    Guest - December 1, 2022 Verified Purchase
    Easy repair
    Great description, and speed, got the drill back together and working nicely
    Guest - November 2, 2021 Verified Purchase
    parts needed, parts obtained
    When my right angle drill needed parts, they came quickly.
    Guest - September 22, 2021 Verified Purchase
    Easy Repair
    Arrived quickly and fit perfectly as expected.
    TOM - January 12, 2021 Verified Purchase
    Critical screw to hold my chuck in place
    Very difficult part to find, but eReplacement had it and I received it in just a couple of days!
    Guest - December 30, 2020 Verified Purchase
    Great part - can be hard to find
    You would think a 1/4 - 20 bolt would be easy to find. Nope. Left hand thread, hardened steel. This is a very specific part. Several places stock them, but there is a price. This company had the best deal. Thanks. Drill works great now.
    Guest - November 19, 2020 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Socket Head Screw


    Will this fit a Milwaukee 2801-20 cordless drill chuck?
    Marie for model number 2801-20 asked on 2022-04-13
    Marie, Thank you for your inquiry. We have researched the model number you have provided and do not show this part as compatible. The compatible chuck screw is part# 05-88-0202. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
    eReplacementParts Team April 13, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (17 rated repairs)?

    Chuck hold down bolt broke

    Roger - February 14, 2019
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen wrench needed

    Removed the broken bolt and replaced with the new bolt. Left hand treads made remembering which way to tighten important.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Snapped Allan screw while trying to back out a stuck drill bit, 1-1/8"x 12" buried deep in a beam.

    Darryl - August 17, 2018
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allan wrench

    Put chuck back on drill shaft, installed reverse thread cap screw, done!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Chuck screw broke

    Bill - June 29, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Allen wrench

    Removed broken screw & replaced with new screw, left hand threads
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken head on chuck screw

    William - March 24, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the chuck
    Remove the broken screw LH thread
    Installed the chuck
    Screwed the chuck screw back in. LH thread
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Leaking gearcase

    Steve - March 5, 2024
    Tool Type

    Electric Drill

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Screwdriver, Torx driver

    Milwaukee 1660-1 HD drill. Needed cord and leaking gearcase. Replaced old grease. Replaced armature bearings and replaced cord. Once all parts were here it took about 2 hours to do...
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken spindle on Milwaukee screw shooter

    Brian - June 17, 2023
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Wrench Set, Vice

    1. Removed the head of the screw shooter.
    2. Pressed the broken spindle out of the bill gear.
    3. Re-assembled the gears for alignment and pressed in the shaft. Kept endplay as close to zero as possible.
    4. Re-assembled the head to the screw shooter.
    5. Tested screw shooter. Back in business.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    broken set screw leaving drill chuck separated from drive

    Timothy - September 24, 2021
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen wrench

    Removed old set screw using allen wrench,
    went to ereplacement.com for new part,
    part arrives in a few days,
    took a few minutes to put back together.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Drill head screw snapped

    Robert - June 24, 2019
    Tool Type

    Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Wrench Set

    Put in new LH thread screw
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken quill on reversing drive assembly.

    Robert - May 15, 2018
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , One open end wrench. Allen wrench.

    1. Removed broken reversing drive assembly.
    2. Installed new reversing drive assembly on drill.
    3. Threaded new 1/2" Jacobs chuck on to the out-put quill of the reversing drive assembly.
    4. Installed socket head cap screw, into the quill, to lock the chuck into place. Note: The socket head cap screw has reverse threads!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken spindle gear

    Mary - December 24, 2017
    Tool Type

    Electric Drill

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Press

    Removed all the broken parts and replaced with the new ones I ordered from your company. I really am happy I have found your company to order future parts from., It was easy to order on line and quick shipping. Thank you
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal