eReplacementParts.com
877-346-4814
Briggs and Stratton Parts
Preferred Partners of
photo thumbnailphoto thumbnail

Water Outlet Kit

Part Number: 201497GS
Briggs and StrattonTroy-BiltSnapper
Availability: 25+ in stock
Price: $26.33
Ships within 1 business day

*This part replaces obsolete part #: and 190634GS.

Product Information
Manufacturer: Briggs and Stratton, Troy-Bilt, Snapper
Product Number: 201497GS
Classification: Part
Weight: 0.13 lbs.
Also Known As: Fitting, Connector, Water Valve
Shipping: Ships Worldwide
Description:
This is a Genuine OEM Sourced replacement outlet kit designed for Pressure Washers. This is an Aluminum Outlet Extension with a Rubber O-Ring that connects between the pressure washer pump and the pressure washer hose. This Fitting is Sold Individually. To replace this item you would need a Wrench.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Briggs and Stratton
Troy-Bilt
Snapper
Expand the 100 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Pressure Washer
Questions & Answers
Showing questions 1-10 of 12
< Prev Next >

When I start pressure washer water comes out of water outlet tube do i have to replace water outlet kit
Dana for model number 020240 asked on 2018-10-18
Hi Dana, thank you for your question. The outlet seal seals the connection from the pump to the high-pressure hose, which sends water to the trigger wand. If the outlet seal is broken, you will likely notice water leaking directly from its connection to the hose. If the outlet coupling is cracked or broken, replace the entire coupling. If the coupling is in tact, replacing the o-ring inside of it should fix the problem. Installing a new o-ring is a very simple and cheap repair. It looks like in your case the seal and the outlet come as one part, so replacing this part should solve your issue. I hope that helps. Good luck with your repair.
Need a new unloader stem kit. Is this it's name or have they changed names? 2200 psi 1, 9 gpm 4.5 hp Briggs & Stanton model 020245-1.
Dave Jeffers for model number 020245-1 asked on 2019-06-10
Hi Dave, Thank you for your question. No, this would not be the correct part. There is an unloader stem kit listed under your model number. The part number listed for it is 190628GS . I hope this helps. Thank you and have a great day!
my pressure washer no longer builds pressure after i removed this part do i have to replace this part to get pressure back the threads are completely gone keep blowing off
Frank for model number 020228 asked on 2022-04-24
Hello Frank, Thank you for your inquiry. If the threads are gone on this part, we would recommend replacing it. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
What hose fits this part? I bought pressure washer from a friend and didnt have a hose and i need one but i have a couple of hoses from previos pressure washer but it wont go in
Luis for model number 020377 asked on 2020-02-19
Hi Luis, Thank you for your question. The part number listed under your model number for the hose is 202017GS. To place an order for the part you may order it either online or by calling our customer service line at 1-866-322-9842 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
when running water is leaking out of bottom there is also oil mixed with oil
Bruce for model number 020676 troy built pressure washer asked on 2019-11-22
Hello Bruce, Thank you for the question. To place an international order or receive a pricing quote: -Find the part(s) you need -Click: Add to cart -When your Shopping Cart comes up, then click on: Outside the US? Click here for international checkout. This takes you to iGlobal, our partner who takes care of international orders. It will show you from there how to proceed (you select your country, etc.). It will then show the different shipping options and their prices after you choose the country. You may also contact them directly via their website at www.iglobal.io. Please be aware that they are unable to look up models and help find parts so if you need help with finding the parts feel free to give us a call at 435-239-3048. If you do have the part number you are looking for, feel free to call them directly. We hope this helps! Please let us know if you need anything else.
Is this part compatible with this model?
Tom for model number 020207 asked on 2019-09-23
Hello Tom, thank you for your inquiry. We can confirm that water outlet kit 201497GS is compatible with your model 020207. I hope this information helps!
I have a Troybilt pressure washer 2200. There is a hard rubber piece that I attach my water supply hose to. This piece also screws into the pump (I think). This piece continually blows off at the pump. What piece / part do I need to replace? Thanks, Dennis
Dennis asked on 2019-09-05
Hello Dennis, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
The wand. Something is missing inside the brass inlet receiver on my wand as the trigger has no resistance & does not shut off the water. On engine start up with water on I must place my foot on the wand or it will move around as the water flow cannot be shut off. Can you tell me if a ball bearing and maybe a snap ring is missing for water shut off?
Dale Hays for model number 020238-0 asked on 2019-08-06
Hello Dale, thank you for inquiring. You may need this Inlet Check Kit part number 190592GS for your model. Please see the related parts below. Good luck with your repair!
I have a 3100 psi Troy-Bilt pressure washer it does not build pressure all it does is sit in idle position. What can be my problem
Ed for model number 020678 asked on 2019-07-24
Hello Ed, thank you for inquiring. You would want to replace the Pump Assembly, but unfortunately for your model it is discontinued and is no longer available. We have no known replacement information in our system. We recommend you contact Troy-Bilt directly to see if they have recently released a new substitute. Please feel free to get back in touch with us to place an order if they provide a substitution part number. Thank you.
what size is the water outlet on a 3000 PSI washer??
Rick asked on 2019-07-01
Hello Rick, thank you for writing. We would be happy to look into this, but we will need the model number for your washer to do so. We look forward to hearing back from you.
Showing questions 1-10 of 12
< Prev Next >
Repair Instructions: Submitted by Customers Like You
18 of 20 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
The threads on the old connector had disintegrated so the hose would blow off with pressure
New connector was screwed in taking about 1 minute and, so far, pressure washer is good to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
crack in the water outlet
Very simple repair. My husband had already removed the cracked part, so, he just had to replace it with the new one. It fit right in place. Tested it, no leaks. But, cold weather here now, so it will be next spring or summer before I get to use it!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 9 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Crack in water outlet pipe
1. Remove bad part.
2. Install new thing.
3. Tighten.
Note: Do not forget to add thread sealing tape to prevent any leaks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Threads were stripped on water outlet.
Removed the water outlet pipe and installed the new one with a wrench.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Tools not needed
Threads stripped out on pump extention
Unscrued old part put new one on then added new hose
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
The part was broken
Removed the old one with a wrench and installed the new one with the same wrench, and the unit worked perfectly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Old outlet was cracked
Simply remove old outlet and replace with new one using 7/8" wrench. Great considering I am an amateur technician.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Broken leaking pipe
Very simple, all you need to do is screw the pipe in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench, N/A
Damage to threads on outlet pipe, metal disintegration due to water chemistry inside the end of the hose.
Removed non-working parts and the installed new parts, took maybe 10 minutes. Used only an adjustable wrench. I have a working pressure washer again!

Thank You!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
Water Outlet Kit - 201497GS
Wand, Hi-Lo - 205015CGS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Water outlet cracked, wand was just worn out.
Replaced outlet using wrench, wand replacement was by hand.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.7
Average Rating (out of 5):
36 Reviews
Click to filter by ratings:
5 stars
30
4 stars
4
3 stars
0
2 stars
1
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Part was correct
    Fast service no problems
    Guest - May 21, 2022 Verified Purchase
    Hard to find part, found it on ReplacementParts. Certain I will us RP again.
    Arrived as scheduled. perfect condition. Thank you RP
    Guest - September 20, 2021 Verified Purchase
    Exactly what I needed!
    Fast shipment, part fit perfect!
    Guest - August 14, 2021 Verified Purchase
    right part
    got the right part the first time. thank you
    Guest - August 5, 2021 Verified Purchase
    As good as new
    The water outlet on a pressure washer is obviously extremely important. The replacement part works flawlessly and installed with ease.
    Robert - June 18, 2021 Verified Purchase
    Worked like a charm
    My power washer is 11 years old. The outlet was corroded and the hose broke off with some of the hose threads in it. Ordered a new outlet and I’m back up and running! Thanks
    Guest - June 12, 2021 Verified Purchase
    Great Job
    My parts arrived early and fit perfectly so thankful for all your help will be coming back and sending friends as well.
    Guest - June 7, 2021 Verified Purchase
    easy repair
    Part came quickly and as promised worked perfectly. Ease of ordering the correct part . Excellent service.
    Guest - June 4, 2021 Verified Purchase
    Just the thing
    Part was here timely and was the correct part. Went on easy and put me back in business
    Guest - July 7, 2020 Verified Purchase
    Work great
    Received in a timely manner
    Guest - July 6, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    • 3
    NEXT >
    Product Information
    Manufacturer: Briggs and Stratton, Troy-Bilt, Snapper
    Product Number: 201497GS
    Classification: Part
    Weight: 0.13 lbs.
    Also Known As: Fitting, Connector, Water Valve
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal