Watch The
Repair Video

Washer

Part Number: 40-1940

Order within the next 3 hours

and your part ships today!

Questions & Answers

Repair Instructions

Product Information

Description:

This item is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal washer is used to provide spacing between the wheel and the pivot arm assembly. This item is available as an individual replacement part.

Warning: California's Proposition 65

Frequently Purchased With

Shoulder Bolt..
$4.54

Bolt-Shoulder..
$3.94

Nut-Lock
$2.99

Screw-Hwh
$2.99

Nut-Lock
$4.27

Compatibility

This part is compatible with the following machines:

Toro

Expand the 150+ compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Lawn Mower

Parts Used:

Retaining Ring - 32151-68

Screw-Hh - 322-6

Shoulder Bolt - 614650

Washer - 40-1940

Arm-Pivot, Rear - 108-9781

Retainer-Bushing, Hoc - 108-9779

Ball Bearing - 104-8699

Bushing-Sleeve - 108-9782

Arm-Pivot, Front - 137-9128

Washer-Flat - 105-3048

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set, Snap ring pliers.

Rear wheel drive pinion and gear on the wheel kept skipping.

Removed the wheel and the pinion and bearing housing. Pressed the new bearing into the new bearing housing and then then pressed in the fiber sleeve into the bearing housing. Install the new bearing housing into the wheel bracket. Installed the pinion spacer washer and then the pinon gear. and installed the snap ring retainer.
Installed new wheel and axle bolt with the new spacer washer. Note: I had just installed a new pinion gear a few days before.
Works ok so far. No pinion gear jumping on the wheel gear. Suspect the bearing and the fiber sleeve for the drive shaft from the transmission was worn causing the skipping problem on my Toro personal pace mower.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Spark Plug - 35395

Washer - 40-1940

Arm-Pivot, Front - 137-9128

Brake Cable - 104-8676

Cable Anchor - 136-5864

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Socket set, Wrench Set

Lawnmower brake cable frayed

Remove old cable from throttle using needle nose pliers
Attached cable to brake bar
Attached cable to throttle

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Shoulder Bolt - 614650

Washer - 40-1940

Arm-Pivot, Rear - 105-1820

Wheel Asm - 105-1816

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Back Wheel broke

Removed wheel bolt, remove arm pivot and replaced with new parts

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Nut-Lock - 3296-6

Washer - 40-1940

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Socket set

One mower wheel kept loosening

This site is organized really well. I found the part I needed for my Toro mulcher and installed it without a hitch. I previously installed a new clutch cable assembly that was a perfect fit.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Shoulder Bolt - 614650

Washer - 40-1940

Arm-Pivot, Rear - 137-9129

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Wrench Set

Back wheel kept falling off.

Removed the back problem wheel and replaced the arm-pivot, bolt and washer.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Nut-Lock, Ni - 3296-47

Screw-Hwh - 32144-85

Washer - 40-1940

Arm-Pivot, Front - 66-0580

Bolt-Shoulder - 66-0560

Screw-Shoulder - 114-3468

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set, none

After 22 years of use ol Toro front arm-pivot was wallered out & needed new bolts

Easy fix take old off & replace with new parts. New parts made front snug as a bug. Saved money on parts & got them a day early. Replacement Parts was great. Thank you.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information