Easy
15-30 minutes
This replacement washer is supplied from original equipment manufacturer for use with Porter Cable framing nailers. It is the washer that helps to provide a tight seal for the piston bumper, for correct application please make sure to check appropriate diagrams of your tool. One durable metal washer is included per order.
Washer 886149
OEM part for: Porter Cable
Part Number: 886149
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Washer will fit the following 6 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
Show More Compatible ModelsThis item works with the following types of products:
- Nailer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Washer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Air leak caused by a broken bumper stop
Harry - May 23, 2020
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Removed old parts and seals and installed new ones
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air coming out the top
Joe - January 2, 2019
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Replaced washer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Piston bumper deteriorated inside the gun
Matt - May 26, 2017
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Hex wrench
Repair was easy and cost effective. All I did was watch the video first to see if I wanted to tackle the project. When it was over discovered there really isn't a lot of parts inside to keep me from trying it. So, I disassembled the nailer and found the source- broken piston bumper. I could see all kinds of plastic pieces scattered throughout the internal workings of the gun. After a good cleaning and a check of all the o-rings, the top portion of the nailer would have to be replaced. Next, I ordered the parts from the website which was simple and easy- in fact I also found a part to my Porter Cable sander as well. After a few short days the parts arrived and I put the gun back together, plugged it into the compressor and tried it out. "P-ka," the nailer was once again making that sweet sound that my wife can't stand.
Now if I had to buy the complete overhaul kit I'm not too sure I would have fixed the nailer. Reason being, the big box stores are always having a sale and a new one could be found for 30-50 dollars more with a one year warranty. Unless, I already had an abundance of nails that were specific to the old nailer then I would fix the old one.
Good Luck with your project and may the force be with you!
Now if I had to buy the complete overhaul kit I'm not too sure I would have fixed the nailer. Reason being, the big box stores are always having a sale and a new one could be found for 30-50 dollars more with a one year warranty. Unless, I already had an abundance of nails that were specific to the old nailer then I would fix the old one.
Good Luck with your project and may the force be with you!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber pad and seal blew.
Earle - July 25, 2016
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set
Parts Used
1. Opened casing to inspect and diagnose the problem.
2. Removed broken parts.
3. Ordered and installed new ones.
4. It was that easy!
2. Removed broken parts.
3. Ordered and installed new ones.
4. It was that easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Driver would not return all the way, to fire the next nail
Ronald - April 6, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Removed 4 allen screws on head, removed head, took out old parts, reinstalled new parts. Gun works fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
