866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Porter Cable Parts  876691 Velcro Hook and Loop Sander Pad

Velcro Hook and Loop Sander Pad

Part Number: 876691
Porter Cable
Availability: Factory Backorder [ more info ]
Price: $31.01
Quantity:
Date Available: Unknown

*This part replaces obsolete part #: and 13904 (Velcro-style, 5 vacuum holes).

Specifications
  • OEM Porter-Cable replacement sander pad
  • Hook-and-loop (velcro) underside
  • 5-inch diameter
  • Five vacuum holes
Description:
This sander pad is compatible with many Porter-Cable random orbit sanders. It is an OEM Porter-Cable replacement part.
The pad features a durable foam body attached to a hard plastic backing plate.
It is a five inch diameter pad with a hook-and-loop style underside for use with Hook and Loop type sandpaper. This pad has five vacuum holes.

This pad will fit the sanders listed in the "Compatibility" section below.

Hook and Loop sandpaper has become very popular over the past few years, because of the ease of changing sandpaper grits when needed.

Product Information
Manufacturer: Porter Cable
Product Number: 876691
Classification: Accessory
Weight: 0.10 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Sanding Pad on a Porter Cable Sander
Sanding pad bad? Remove and install the sanding pad on your Porter Cable sander with these easy instructions....
October 08, 2015
Related Products
Products Compatibility

This item works with the following types of products:

  • • Sander
Questions & Answers

Will replacement Pad #13904 fit on a model # 382 Sander?
Wayne for model number 382
Hello Wayne, thank you for your inquiry! The correct hook and loop sander pad for model 382 is part number 151281-08. I hope this information helps!
Repair Instructions: Submitted by Customers Like You
28 of 29 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Needed a new sanding pad as the old hook and loop pad became separated
Easy repair with just 3 screws. Really pleased with eReplacementParts prices and timely delivery.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
19 of 21 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Old pad had disintegrated from age
Remove the 3 screws that hold the old pad on. then use the screws to attach the new pad to the sander.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
10 of 10 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The sander pad split and broke off
1. Set sander down upside down with bottom facing up.
2. Using a Phillips #2 driver loosened the fastening screws and removed them.
3. Removed pad fastening plate.
4. Took the new pad, lined up the holes and set it in place.
5. Replaced the fastening screws and screwed them in three quarters of the way in by hand.
6. Using the Phillips #2 driver ran screws in until they became slightly snug.
7. Using an alternating pattern tightened each screw a little more each time until all were at the proper torque.
8. Installed sanding sheet.
9. Turned the sander over and turned it on checking for abnormal movement and vibration.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
11 of 12 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The rubber pad disintegrated
1. Removed the old pad, (three screws)
2. Installed new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Random Orbit Belt - 903373
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The pad wore out. I decided since I was replacing the pad I would replace the belt at the same time.
1. Took off old pad what was left of it.
2. Changed belt
3. Put new pad back on sander.
4. Works great again!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, none
Old pad separated during use
Remove the three screws holding the old pad on. Install the new pad using the same screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Original pad fell apart
1. Removed the 3 screws holding the old pad on.
2. Cleaned out the sawdust from inside.
3. Installed the new one using the same screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Random Orbit Belt - 903373
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Pad broken.
Removed and repaired.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Rubber sanding pad
It took 10 minutes and was easy. Nothing special was required to complete repair. Just remove three screws and the old pad. Install the new pad with the screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Velcro Hook and Loop Sander Pad - 876691
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sander pad had separated from base
Removed three screws, replaced sander disc and put screws back in. Easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Velcro Hook and Loop Sander Pad - ( 876691 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Sander Pad Attachment

jo4hn

My 333 does not have the three bolt holes for attachment of the pad to the support. Were any of these glued on or attached in some other way than is shown in all of the literature?
I destroyed the pad (sometimes patience is not one of my virtues) and found the screws beneath the velcro pad. The velcro pad was an 8 hole variety with 7 holes filled in with some sort of hard adhesive and 4 additional holes drilled. Need a new pad now. If anybody knows why this was done this way, let me know. Inquiring minds and all that. TIA. jo4hn
Question: Porter Cable 333 Sanding Pad

Gustav

Is there an after market 8 hole pad available
for the Porter Cable 333 Random Orbital sander?
WJA
Hello Gustav,

Porter Cable offers a 5 inch pad with 5 holes that are elongated, so you can use 8 hole hook and loop paper. And it works surprisingly well. It is part number 13909.

Hope this helps,
-WJA
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy