eReplacementParts.com
877-346-4814
Ryobi Parts

V-belt 532144959

OEM part for: Husqvarna, Ryobi, Poulan

Part Number: 532144959


Install
Videos!
V-belt - 532144959:Husqvarna 360 View
V-belt - 532144959:HusqvarnaV-belt - 532144959:HusqvarnaV-belt - 532144959:HusqvarnaV-belt - 532144959:HusqvarnaV-belt - 532144959:HusqvarnaV-belt - 532144959:HusqvarnaV-belt - 532144959:HusqvarnaV-belt - 532144959:HusqvarnaV-belt - 532144959:Husqvarna 360 View
In Stock
Order within the next 9 hours and your part ships today!
Medium 30-60 minutes (23 rated repairs)?
OEM: Original Equipment Manufacturer ?
HusqvarnaRyobiPoulan

Product Description ?

This is a Genuine replacement Belt sourced from Original Manufacturer and it is used on Riding Lawn Tractors/Mowers. This part is made out of Rubber and it is Sold Individually. This is the Belt that drives Blades on your unit.

Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance.

You would need a Wrench set and Pliers to replace this belt.

• For your safety make sure to disconnect the spark plug wire.
• Fist you would need to lower the mower deck to the lowest position
• Then move the blade engagement lever to the Off position.
• Roll the belt off the engine pulley from between the belt guide and pulley.
• Remove mower deck by removing the bow-tie pins securing the left and right lift arms
• Disconnect the blade engagement cable from the mower deck
• Remove the bolts from the mower deck belt pulley covers and pull the covers off.
• Loosen but don’t remove the nuts on the top of the idler pulleys.
• Install the new mower deck belt through the belt guides and around the pulleys.
• Tighten the nuts on the top of the idler pulleys.
• Re-Assemble the Deck

  • Classification: Part
  • Weight: 0.60 lbs.
  • Shipping: Ships Worldwide

Compatibility

This V-belt will fit the following 1197 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Lawn Tractor Parts
  • Lawn Mower Parts

This part replaces obsolete part #: 144959D, 690-500-0001, 144959, 75-197

Customer Part Reviews ?

4.6
Average Rating (out of 5):
25 Reviews
Click to filter by ratings:
5 stars
19
4 stars
4
3 stars
0
2 stars
1
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • This fits 17.5 craftsman riding mower
    Fits perfect .wasn’t sure if this would fit because it said huscavrna and I have a craftsman but it was the right size .thanks Note to self .use the serial number and model number on your manchine
    William - July 24, 2023 Verified Purchase
    good parts as usual.
    items arrived promptly and are working great. keep up the good work. thanks
    Guest - July 20, 2023 Verified Purchase
    Perfect
    Perfect fit. No problems.
    Donald - July 3, 2023 Verified Purchase
    Was the right belt and size I needed.
    Fit perfect and easy to install. Good quality.
    Guest - July 22, 2022 Verified Purchase
    Came on time. Appreciate that now days.
    Was working as it should.
    Guest - April 21, 2022 Verified Purchase
    Great part.perfect fit
    My mower mowing good now
    ALAN - July 14, 2021 Verified Purchase
    Very happy customer
    Part came promptly. Great customer service representative to talk to. Will use again!
    Guest - June 23, 2021 Verified Purchase
    Mower drive belt replacement belt
    The mower drive belt was easy to find on your website. The belt arrived quickly and in great shape. It also was a perfect fit and reasonably priced. I would definitely order from you again
    Larry - May 15, 2021 Verified Purchase
    Service via telephone was excellent
    The part was recieved sooner then expected and the quality was excellent and fitted perfectly. Thank you
    Guest - January 18, 2021 Verified Purchase
    Right Part, First Time, Every Time
    Part was new, fit right, fixed the problem. The fact that it arrived earlier than estimated was a real bonus. Great company to purchase parts from, highly recommended.
    Guest - November 25, 2020 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for V-belt

    Showing questions 1-10 of 23
    < Prev Next >

    Need a belt for my riding mower craftsman 6 speed 42 inch cut
    Robin for model number 917270410 asked on 2023-10-18
    Hello Robin, Thank you for your inquiry. Researching your model, we show the deck belt as part# 532144200, and the transmission drive belt as part# 532138255. We hope this helps.
    eReplacementParts Team October 18, 2023
    Need a drive belt not a deck belt whats the part #
    Dennis for model number 917276817 asked on 2023-03-08
    Hello Dennis, Thank you for your inquiry. Researching the model number that you have provided, we show the ground drive belt as part# 532138255. We hope this helps you.
    eReplacementParts Team March 08, 2023
    Need belt for M.917.272751. How many inches is belt, part #532144959 and will it fit this mower? Thanks
    Gary for model number M.917.272751 asked on 2023-01-03
    Hello Gary, Thank you for your inquiry. We have researched the model number that you have provided and confirm it is the compatible mower deck belt for your model. We show it measures 95 1/2 inches long. We hope this helps.
    eReplacementParts Team January 03, 2023
    My lawn tractor isn't on the list.. I'm having so much trouble looking for part numbers..im looking for a deck belt .. That controls my blades.. Please help
    Christi for model number 917251561 asked on 2023-05-18
    Hello Christi, Thank you for the question. The Belt to drive the blades for this model is Part Number: 532139573. We hope this helps!
    eReplacementParts Team May 18, 2023
    I NEED THE BELT THAT DRIVES THE BLADES....MY MODEL IS NOT ON THE LIST.... PLEASE HELP...THE 95 INCH BELT IS TOO LONG...THE 88 INCH BELT IS TWO SHORT
    Mike for model number 917.259820 asked on 2023-05-11
    Hi Mike, Thank you for the question. The Belt for this model is listed as Part Number: 532144200. Good luck with the repair!
    eReplacementParts Team May 11, 2023
    what is the proper V beltnumber
    Gary for model number 917.288515 asked on 2022-11-08
    Hi Gary, Thank you for your question. The part number listed under your model number for the drive belt is 532130969. This belt is secured to the transmission pulley to help drive the unit. The part number listed for the belt that drives the blades is 598559101. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
    eReplacementParts Team November 08, 2022
    Do I need any other parts after installing the drive belt? Do I need to replace any of the pulleys?
    Marie for model number 917-288080 asked on 2022-10-18
    Hello Marie, Thank you for reaching out. If the belt is the only damaged or worn part, only the belt needs to be replaced. Please submit a new question if you have any follow ups. We are looking forward to hearing from you!
    eReplacementParts Team October 18, 2022
    Is this the part number for the belt 532144959 for my riding lawn mower?
    Marie for model number 917288080 asked on 2022-10-18
    Hello Marie, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 532144959. Thank you for your inquiry, good luck with this repair!
    eReplacementParts Team October 18, 2022
    What is the length of this belt
    Dave for model number 917.272201 asked on 2022-10-15
    Hi Dave, Thank you for your question. The belt measures 95-1/2 inches long by a 1/2 inch wide. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
    eReplacementParts Team October 15, 2022
    I need a drive belt and idler pulley Belt is 87" roughly
    Will for model number 917.276824 asked on 2022-10-11
    Hello Will, Thank you for your inquiry. We have researched the model number that you have provided and show the ground drive belt as part# 532178138 and measures 87 1/2 inches, and the ground drive fixed idler pulley as part# 532179114. Good luck with your repair and if you need assistance with placing an order, please do not hesitate to call our customer service, open 7 days a week to help you. We look forward to hearing from you.
    eReplacementParts Team October 11, 2022
    Showing questions 1-10 of 23
    < Prev Next >

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 30-60 minutes (23 rated repairs)?

    V-belt that turns blades on mower deck broke.

    Norman - August 29, 2016
    👍 14 of 17 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    , Gloves, needle nose pliers

    Removed Hairpin Cotter keys. After removing cotter keys you then slide deck out from under mower. Then checked pulleys for damage and turned deck over and sharpen blades. Then replaced v-belt, replaced deck, replaced pins. 30 minutes at most.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Belt broke on the mowing deck.

    Russell - May 2, 2017
    👍 13 of 19 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Wrench Set

    Lowered the deck all the way down. Removed one drive belt and a pulley, then put the new belt on. Follow by the pulley and the drive belt.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Damaged parts

    joel - May 2, 2017
    👍 5 of 5 people found this instruction helpful
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    1-2 hours

    Tools Used

    Pliers, Socket set, Wrench Set, Adjustable Wrench

    Removed the deck and replaced parts.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Both belts were on the verge of breaking, they were frayed and cracked

    Laughlin - July 10, 2019
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Pliers, pry bar for the idler pulley spring

    I removed the mower deck from the tractor which was the hardest part of the job. Removed the old belts and installed the new ones which was about 5 minutes tops. It was really a piece of cake and the fit was perfect as well. Made a drawing of pulleys and belt position before removing old ones.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Cutting blades not turning belt streched

    Clyde - September 5, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Hands

    Jacked up the front, removed old belt, then put on the new belt
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    deck parts need to be replaced

    dave - July 26, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set, Nutdriver, impact driver

    changed out the required parts
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Very old belt that just needed replacing and replaced broken blade ingaugement cable

    William - July 24, 2023
    Tool Type

    Lawn Tractor

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Pliers

    1 parked mower on level ground
    2 removed plug wire from spark plug
    3 lowered deck all the way down
    4 removed gas tank
    5 removed 4 bolts holding engagement shifter
    6 unscrewed shifted knob
    7 un did cable retainer at shifter ( ball and socket )
    8 cut wire tie and cables under frame
    9 pulled pin holding cable retainer
    10 pulled pin holding spring to engagement pully
    10 removed washer and spring
    11 with cable out of the way removed belt
    12 installed belt and reinstalled cable engagement
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken belt and spring

    douglas - July 29, 2022
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Pliers, None

    Removed deck and replaced belt and spring
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Clutch cable broke due to unlubricated pivot pulley. Belt was worn from years of service.

    Mike - October 26, 2021
    Tool Type

    Lawn Mower

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Nutdriver

    I removed the mower deck , replaced clutch cable and drive belt. Then replaced mower deck. I received my parts really quick. They were exact replacement parts. And even had a instruction sheet for both parts. Very happy with the service i got.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Mower belt broke.

    mark - May 19, 2021
    Tool Type

    Lawn Tractor

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Wrench Set

    Put the belt on in a way that made sense connecting Drive pulley.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal
    Recent searches:
    Suggested searches:
    Models:
    Manufacturers:
    Need help finding your model number?