eReplacementParts.com
877-346-4814
Coleman Parts
Repair Parts Home  Outdoor Recreation Parts  Coleman Parts  118D6201 Valve Stem Packing
photo thumbnailphoto thumbnail360 degree photo thumbnail

Valve Stem Packing

Part Number: 118D6201
Coleman
Availability: Special Order [ more info ]
Price: $2.78
Leaves our warehouse within
9 - 15 business days.
Product Information
Manufacturer: Coleman
Product Number: 118D6201
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine OEM sourced replacement part for Coleman lanterns or stoves. It acts as a spacer and a seal for the valve stem. This item is made out of graphite and it is sold individually. Please note it does not include valve stem or a wheel.
Compatibility

This part is compatible with the following machines:

Coleman
Expand the 73 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Lighting
  • • Range
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
15 of 15 people found this instruction helpful
Tool Type:
Range
Parts Used:
Valve Stem Packing - 118D6201
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set, Adjustable Wrench
The valve stem leaked coleman fuel when the tank was pressurized.
Removed the valve stem from the regulator assembly. Removed the packing nut from the valve stem. Used a small screwdriver to remove the old packing (in pieces), Installed the new packing and reassembled the regulator assembly. Pressurized (pumped up) the fuel tank and tightened the packing nut until there was no more leaking from the stem.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Lighting
Parts Used:
Check Valve and Air Stem - 200-6381
Pump Plunger - 242J5201
Valve Stem Packing - 118D6201
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set
Fuel leak and worn parts
Disassembled the lantern to include valve assembly and the safety check valve. Cleaned the valve stem with a brass bristle wire brush. Installed the valve stem packing verifying fit and ease of operation of the valve. Installed new check valve and air stem and installed new pump plunger. Once the new parts were installed, pressure checked the system and tightened the valve stem assembly in small increments until the valve stem no longer leaked. Reassembled the lantern and tested the operation. Lantern is operating like new and will have many years of use again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Range
Parts Used:
Valve Stem Packing - 118D6201
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Adjustable Wrench, A metal pick to remove the old packing.
It was leaking fuel from the stem after being turned off.
I followed You Tube instructions.

Remove valve stem assembly by loosening the brass hex nut.
Then removing the valve handle (Black plastic held on by screw).
Removing brass hex valve stem nut from stem.
Removing packing from nut (difficult and required a pick).
Cleaned interior of nut.
Placed new graphite packing on stem.
Placed nut back on stem.
Put stem back in place.
Tightened nut.
Replaced valve handle.
It worked fine and turned on and off as it should, NO LEAK!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lighting
Parts Used:
Valve Stem Packing - 118D6201
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Adjustable Wrench, Bbs
Lantern hasn’t been used for 20 years
Fueled up the lantern noticed it was leaking around the valve stem.
After ordering the parts I took the stem apart cleaning it up and installed the packing.
I looked inside the tank and saw a lot of rust an debris so I put a lot of bbs in the tank and rolled it round and round an up and down for a while.
Dumped the bbs and fuel out and put a air nozzle in and blew out the tank.
Put fuel back in and put new mantles on and fired it up.
Works like new! 1976 model 220c.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Range
Parts Used:
Valve Stem Packing - 118D6201
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set, sharp knife to remove remains of failed packing.
Coleman stove would not hold pressure because of significant leak at flame control knob. Knob/shaft was stuck and would not turn.
1. Disassembled the flame control assembly by removing the knob (small screw in center of knob).
2. Remove bass fitting containing valve stem packing from shaft.
3, Thoroughly scrape remnants of old packing from inside of fitting.
4. Scrap remnants of packing from control knob shaft. Polish shaft with sandpaper. 220 grit will do.
5. Insert new valve stem packing into fitting.
6. Replace fitting on shaft to engage threads and tighten, turning shaft to ensure a smooth fit. Tightening intentionally crushes the graphite packing to create a seal, but do not tighten more than necessary.
7. Replace knob, fill fount and test stove/lantern. If leaking or flames appear around the fitting, gently tighten until leaks stop.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Range
Parts Used:
Valve Stem Packing - 118D6201
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Adjustable Wrench
Coleman425E 2-burner stove valve leaking fuel
Drain fuel from tank....open valve wheel fully....remove valve wheel...loosen, carefully remove valve-nut, and long "stem", not damaging needle on end of stem. CAREFULLY scrape/clean old graphite packing from inside valve-nut; DO NOT damage threads inside nut. insert new packing in nut. Re-assembly: CAREFULLY slide stem/needle back through valve, and into generator-tube. (GENTLY seat needle-end into manifold.) Re-install valve-nut till firmly snug. re-install valve-wheel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lighting
Parts Used:
Valve Stem Packing - 118D6201
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Packing disintegrated
Replaced packing on valve stem
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lighting
Parts Used:
Valve Stem Packing - 118D6201
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Very old packing was dry.
Coleman lantern from family circa 1955. Found packing at this site. Price & shipping good. I would not have looked here. A search engine found the part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Valve Stem Packing - ( 118D6201 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Valve Stem Packing

rcarmony

What are the dimensions of Coleman part # 118D6201
WJA
Hello rcarmony,

The dimensions on the Coleman 118D6201 Valve Stem Packing are:

3/8 Inch OD
1/4 Inch ID
5/16 in Length

-WJA
Reviews
2.3
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
2
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fast delivery tanks
    Fix perfectly.
    Guest - February 15, 2020 Verified Purchase
    For two orders parts arrived broken.
    I ordered 2 valve stem packings and both were received broken. Two replacement stems were shipped Tom and one of them was received broken, after requesting they be shipped in a box. The I was told to deal with Coleman.
    Guest - November 16, 2019 Verified Purchase
    When I received it they were crushed.
    When I received it they were crushed. They were shipped in a bubble wrap envelope. next time the must ship these in a small box or something that will not crush. I have not yet reordered them.
    Guest - September 14, 2019 Verified Purchase
    eReplacementParts Team
    Hello Patrick , Thank you for leaving a review on the part ordered. Checking the order I am showing you have already contacted us to address the issue. Please let us know if there is anything else we can assist you with.
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Coleman
    Product Number: 118D6201
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy