Grid squares measure 1x1 inch

Watch The
Repair Video

Pump Plunger

Part Number: 242J5201

32 Reviews

Order within the next 4 hours

and your part ships today!

Questions & Answers

Repair Instructions

Product Information

Description:

Genuine Coleman replacement part, it is sold individually. This part keeps the lantern pressurized.

Includes: Plunger, spring clip, metal cap, spring, and clip.

Installation is fairly easy, requiring needle-nose pliers, oil, and a flat-head screwdriver, or similar tool, to pry to the spring clip off of the pump.

Compatible with the Coleman lanterns shown below.

Warning: California's Proposition 65

Frequently Purchased With

Check Valve an..
$8.38

Generator
$17.96

Neoprene Pump ..
$4.79

Valve & Genera..
$89.19

Pump Clip
$4.79

Burner
$37.11

Compatibility

This part is compatible with the following machines:

Coleman

242B Single Mantle Propane Lantern
242C Single Mantle Propane Lantern
214A700 1-Mantle Kerosene Lantern
214B700T 1-Mantle Kerosene Lantern
237-195 Kerosene Single-Mantle Lantern
237A195 Kerosene Single-Mantle Lantern
237B195 Kerosene Single-Mantle Lantern
214A700E Kero 1-Mantle Lantern
201-700 Kerosene Lantern
201-7009 Kerosene Lantern
234 Single Mantle Kerosene Lantern
286A7035 1-Mantle Red Lantern
286A700 1-Mantle Lantern
286A700C 1-Mantle Lantern
286A703 1-Mantle Red Lantern
285-746 2-Mantle Lantern Combo
285-746T Lantern Combo
285-700E Unleaded 2-Mtl Lantern
285-734 Lantern
285-742 Lantern
286A743 Lantern-Red-Combo
202 Single Mantle Lantern
413G499 2-Burner Gas Camp Stove
413H499 2 Burner Gas Camp Stove
425E499 2 Burner Gas Camp Stove
426D499 3 Burner Gas Camp Stove
426E499 3 Burner Gas Camp Stove - Coleman Fuel
3000000791 Dual Fuel Powerhouse 2-Burner Stove
3000001138 1-Mantle Kerosene Lantern
22E197 2 Mantle Gas Lantern
413E Fuel Stove
428-A00 3-Burner Stove
413F Fuel Stove
200Ba65J Lantern
288 Lantern
290 Lantern
266 Lantern

Expand the 75 compatible machines

Questions & Answers

Sort by

Will part #242J5201 for the above mentioned model ever be available again?....... and is there a comparable alternate p/n available?

Lee for model number 290A700C asked on 2023-03-17

Hi Lee, Thank you for your question. There is a pump repair kit listed for model number 290A700C. This kit is made for newer lanterns with a plastic pump cap, but it does include the parts to convert it to an older-style metal pump cap. This kit includes the parts for one repair. A pair of needle nose pliers and some lubrication oil will be needed for this repair. The part number listed under your model number for the kit is 3000006400. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!

Related Parts: Pump Repair Kit

Did this question help you?

will this pump fit my 228j lantern

Evelyn for model number 228j lantern asked on 2023-02-21

Hello Evelyn, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. We hope this helps.

Did this question help you?

Is there a shipping fee?

Joe asked on 2022-12-20

Hello Joe, Thank you for your inquiry. We do charge for shipping, which is calculated when you enter your zip code after clicking add to cart and going to the shopping cart screen. It will then give you the shipping options based on the part and zip code. We hope this helps.

Did this question help you?

Can a pump plunger fit a 220 E that can fit a 220 F?

Craig for model number 220E lantern asked on 2022-09-20

Hello Craig, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 242J5201. Thank you for your inquiry, good luck with this repair!

Did this question help you?

Repair Instructions: Submitted by Customers Like You

13 of 15 people found this instruction helpful

Tool Type:

Lighting

Parts Used:

Pump Plunger - 242J5201

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Needle nose pliers

Pump not working

I watched your video on the repair. Thank you. Here is the link for any one.

https://www.youtube.com/watch?v=t3JpSkWHuWY

Did you find this story helpful?

Thanks for voting and helping fellow customers!

7 of 7 people found this instruction helpful

Tool Type:

Lighting

Parts Used:

Check Valve and Air Stem - 2006381ZCL

Pump Plunger - 242J5201

Valve Stem Packing - 118D6201

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Wrench Set

Fuel leak and worn parts

Disassembled the lantern to include valve assembly and the safety check valve. Cleaned the valve stem with a brass bristle wire brush. Installed the valve stem packing verifying fit and ease of operation of the valve. Installed new check valve and air stem and installed new pump plunger. Once the new parts were installed, pressure checked the system and tightened the valve stem assembly in small increments until the valve stem no longer leaked. Reassembled the lantern and tested the operation. Lantern is operating like new and will have many years of use again.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 5 people found this instruction helpful

Tool Type:

Range

Parts Used:

Pump Plunger - 242J5201

Valve & Generator Assy. - 413B6601

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers

Valve wore out.

Unscrewed the valve assembly and put the new one in. Same with the pump.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

4 of 4 people found this instruction helpful

Tool Type:

Lighting

Parts Used:

Tie-Style Mantles - 3000004344

Pump Plunger - 242J5201

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Wrench Set

Would not pressure up

Took lantern apart after watching your video, ordered parts replaced as per video.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Range

Parts Used:

Pump Plunger - 242J5201

Auxiliary Burner Assembly - 413D3461

Master Burner Assembly - 425A3451

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, NA

Just old & due for some maintenance...

I got my Coleman 413G Two Burner camp stove, as a gift, in about 1976. It has worked flawlessly, with only a couple of pump kits, for all these years. I'm talking 1 match, to light it!
With another trip coming up; I decided to replace both burners, and another pump kit.
Easily done!
The burners get slightly rusted, over the years, and the auxiliary burner is affected the most.
Now, we will have two full burners.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Heater

Parts Used:

Filler Cap - 3000005086

Pump Plunger - 242J5201

Leather Pump Cup - 2165091

Valve & Generator Assy. - 413B6601

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Wrench Set, Adjustable Wrench

Coleman model 413E gas camp cook stove was acting up with high yellow flames instead of small blue flames

Pulled clip from fuel tank at the plunger and installed new parts with some oil on the new leather cup. Unscrewed valve and Generator assy. and applied sealer to threads on new assembly, and tightened then screwed on the new cap. Pumped it up and it works like it did new in 1956.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Range

Parts Used:

Pump Plunger - 242J5201

Master Burner Assembly - 425A3451

Burner Caps & Rings/Fillers - 4253451

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Adjustable Wrench

Needed maintenance of a 1973 Coleman Stove

Removed all old parts, seeing no directions came with parts, just left assembly as it was when removed to know how to replace new parts. Only real problem was installing c clip on new pump assembly but job was completed in less than an hour

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Range

Parts Used:

Pump Plunger - 242J5201

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers

Coleman Camp Stove Model 413G Pump Plunger

Removed "C" spring clip with long nose pliers.
Pull plunger completely out to gain access to valve.
Pry off compression fastener to remove worn plunger valve.
Replace with new plunger valve.
Push on new compression fastener.
Carefully reinsert pump plunger.
Reinstall "C" spring clip.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lighting

Parts Used:

Pump Plunger - 242J5201

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Was not pumping anymore.

Replaced the existing part.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lighting

Parts Used:

Pump Plunger - 242J5201

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, None

Pump dry-rot and stuck in lantern.

Removed the defective pump from lantern. Lubricated new pump and lantern, and replaced pump.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

32 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Great experience for old lantern

I found my dad's old 1974 Coleman lantern and it needed a couple parts. I ordered them easily and they were delivered as promised. I installed them and the old lantern fired right up! I was so happy since my dad has been gone for some time, I was grateful I could get this working because its such a great childhood memory for me. Thank you.

Guest - April 24, 2023 Verified Purchase

great

Easy web page for ordering and fast shipping. E-Replacement great seller

Michael - April 4, 2023 Verified Purchase

Pump assembly for 220

Worked beautifully for my 220F and 220J

Guest - October 12, 2022 Verified Purchase

easy repair

fit perfectly

Guest - September 30, 2022 Verified Purchase

👍

Do you carry replacement parts for 44 caliber cap and ball pistol Rich land arms company new Texas Army

Thomas - July 11, 2022 Verified Purchase

Easy repair with parts provided

The repair to my old Coleman stove worked fine.built up pressure like it had done in the past. But the Coleman lantern not so .cannot build pressure need advise on what I should do.

Guest - July 8, 2022 Verified Purchase

Easy to repair

They have great parts it was pretty easy to find on the site and to order. Will order again

Anonymous - June 21, 2022 Verified Purchase

great part

just what I needed and came with speedy delivery.

Guest - June 6, 2022 Verified Purchase

Always reliable and fast!!

We always check here first for parts!! Always satisfied!

Paul - April 3, 2022 Verified Purchase

Worked as Expected - Video Very Helpful

I purchased the pump for a Model 425 (I think) stove and it fits perfectly. I called tech support before I purchased and the representative was very helpful. I described the stove with measurements of the old parts and he believed this pump would fit. There is a very informative video (https://www.youtube.com/watch?v=t3JpSkWHuWY) that shows how to use the "newer" style pump on the older stoves / lanterns. The part is in a package labeled Coleman so it appears to be a genuine part. Highly recommended.

Guest - June 29, 2020 Verified Purchase